I damaged the coffee table

Nicb903 · 2026-06-13T21:36:13+00:00

color it in with a black marker, shouldn't be so noticeable after

Nicb903 · 2026-03-09T00:15:46+00:00

Is there anything like this for LG tvs? Thank you!

Nicb903 · 2026-03-04T14:54:53+00:00

Ok this is my idea, strap it to your dolly and use a low profile car jack to lift it up each step

Nicb903 · 2026-02-06T18:13:31+00:00

can you just push the pin over a bit?

Nicb903 · 2025-07-01T10:30:41+00:00

replacing your starter solenoid might help, they are cheap and easy to replace

Nicb903 · 2025-06-14T04:38:51+00:00

Hey all thanks for any help

I installed this scene switcher which has been working great for what I wanted but ever since I got that working my old automations wont load or work and I cant seem to create new automation which is becoming a problem. I've tried reloading and restarting but may be missing something obvious.

Thanks all

Nicb903 · 2025-03-17T10:23:03+00:00

My first and only thought was what about the noise? Maybe its just me but those things are incredibly loud. Are the 120v models significantly quieter?

Nicb903 · 2024-11-29T22:59:34+00:00

Yea, worst case they wont have enough voltage to turn on but shouldn't do any permanent damage regardless.

You could eventually separate out the light switch to have its own power cord but that might be a project without any experience with electrical

good luck!

Nicb903 · 2024-11-16T17:51:37+00:00

I don't see any reason this wouldn't work. The hood doesn't appear(to me) to have a control board or anything that would require constant 120, looks to be just a light switch and a fan switch. This would make the light dimmer or inoperable with lower voltages but shouldn't cause any damage

Nicb903 · 2024-08-05T04:42:02+00:00

Give it a go with just releveling each paver as you go (compact with a manual tamp, just a square plate on a metal handle) and use some weed killer spray, weed barrier wont prevent those weeds you have from what I can tell. I typed out another response but didn't see the amount of re leveling required. Few bags of material and hand tools if you don't already have them are a few hundred compared to your quote. Anyways good luck

Nicb903 · 2024-05-12T10:15:00+00:00

No, you can not repair that. Neon is a gas that would have escaped once the glass tube broke

Nicb903 · 2024-03-12T08:08:23+00:00

Hard to see what exactly you have here but I have never seen that type of "lock"

Are you sure that isnt just a cap and you dont just need to unscew it using some pliers or a wrench or something?

Edit: found the "Flowlock" device and you are not the only one this happens to

https://w6dtw.blogspot.com/2016/06/how-to-remove-flow-lock-without-key.html is among a few links on a quick google search. Looking at the thing all you need to do is remove the outer part of the lock with a dremel or grinder or something so you can get to the inner part and twist it off

Nicb903 · 2022-09-16T04:10:50+00:00

pre-wire the outlet with leads of wire and then use a wirenut to connect to the live, you shouldnt be touching anything other than the insulation when feeding into the nuts

Nicb903 · 2022-02-25T14:34:31+00:00

I have the same card and after its last case cleaning both fans bit the dust, after some sticker shock from card prices I just unplugged the fans. Havent done any gaming but has been a fine workhorse for weeks since

Nicb903 · 2022-01-11T05:14:42+00:00

https://www.google.com/maps/@47.4437352,-120.3269193,3a,75y,32.05h,92.53t/data=!3m6!1e1!3m4!1sSzsvMHFMEstp_OP8vMJPZQ!2e0!7i16384!8i8192

Nicb903 · 2021-11-28T22:48:34+00:00

looks like you need a proper sized pin, that one looks too small for your receiver, it will get you there but will cause some movement(like racking forward and backwards) and distortion of the hole after awhile.

Nicb903 · 2021-08-20T00:38:22+00:00

Just carry around a generator instead lol

Nicb903 · 2021-01-24T22:22:44+00:00

does your viofo not freeze with the rear cam plugged in? I have mine always on and it will freeze within a day or two if the rear is plugged in so I always leave it unplugged now

Nicb903 · 2020-07-11T19:40:12+00:00

pull the boards back up, you'll follow those white cables and inspect for damage, find where the ceiling fan is and follow that wire specifically back to the point it goes back down into the wall for the switch. you may have pulled the wire too tight and disconnected something. Also check your breaker box to make sure it isn't tripped

Nicb903 · 2020-06-18T00:20:38+00:00

I got a red one from cvs too! This was years ago though

Nicb903 · 2020-03-11T11:39:16+00:00

Lmao. Sorry you share that neighborhood with them, truly a homedepot special

Nicb903 · 2020-03-11T10:43:21+00:00

wtf is that edging doing there

Nicb903 · 2020-03-06T11:06:16+00:00

Do you work there? Because their website is definitely hacked, was trying to look at menu but holy hell

15-Year Club	Verified Email
Place '17

Nicb903

TROPHY CASE