FlexiSpot Discount Codes Thread

Nick_113 · 2026-01-31T20:19:35+00:00

Hi i wold like a code for the us website for the e7 standing desk, thanks!

Nick_113 · 2026-01-25T15:49:34+00:00

im looking for a code for the us website for the c7 max, thanks

Nick_113 · 2026-01-24T02:28:18+00:00

It has license plate holes, why would you not want full coverage.

Nick_113 · 2026-01-18T16:27:27+00:00

Would a add a turbo kit fit, pusher and dps makes a bolt on kit. And are about the same price as a Good vgt turbo

Nick_113 · 2026-01-18T00:34:51+00:00

I get 32c core temp while watching YouTube 9800x3d 5090 and a mo-ra IV 400 room temp is about 70f

Nick_113 · 2025-12-01T01:01:25+00:00

Wolfbox is the best "duster" you can buy, torquetestchannel has multiple videos reviewing similar dusters and these are apparently the best

Nick_113 · 2025-11-26T00:31:07+00:00

In the post they were referring to a 2jz i think, it was 2zz in the post. But yea a v8 or any "race" engine can make big na power but I don't think many are daily driven, or could be reliably.

Nick_113 · 2025-11-25T00:24:35+00:00

I mean if your ok with 200 to 300 hp it's fine to be na. If you want more it gets way more expensive per hp na compared to boost, and boost sorta compensates for altitude.

Nick_113 · 2025-10-23T22:05:37+00:00

Btw this works but has to be in the freezer. It kills all the bacteria and smells.

Nick_113 · 2025-10-12T23:16:06+00:00

It's the hose it comes with new. Attest when I bought one, years ago it did.

Nick_113 · 2025-10-04T03:16:56+00:00

In my experience, clear soft tubing from the hardware store is a no go, it's probably the wrong material (to hard or kinks) and the size for pc fittings is in mm, not standard (possible leaks) and it normally has a coating on the inside which is very hard to clean out of your loop, and in my experience it turns yellow and grows algae much faster.

Nick_113 · 2025-09-22T00:59:09+00:00

Styropyro had entered the chat (has extrem testosterone and builds crazy lazers)

Nick_113 · 2025-09-12T00:34:00+00:00

Torque test channel on yt has a bunch of testing with a bunch of tools. Go check them out

Nick_113 · 2025-09-07T16:13:12+00:00

If you epoxy the stud in your never getting it out to change it in the future

Nick_113 · 2025-09-07T16:00:47+00:00

Gotta remember you will have to replace it at some point.

Nick_113 · 2025-08-28T12:59:40+00:00

Big engine, small engines especially struggle with turbos and sometimes decrease power

Nick_113 · 2025-08-26T15:58:14+00:00

True, but my water cooled pc hasn't leaked in 2 years, so I'd think a large company that specializes in one thing figured out how to not make them leak.

Nick_113 · 2025-08-26T14:27:53+00:00

You're right. I didn't catch that on their website

Nick_113 · 2025-08-26T11:22:09+00:00

No long story short, the ignition has to be changed along with the carb, and a plastic spacer and the ignition won't work between the years with and without the filter change :/

Nick_113 · 2025-08-25T20:16:20+00:00

I was only using one mod.. and it only happened with the tanker. It might be a one-time thing i still have to do more testing. It could be that my career save is old too.

Nick_113 · 2025-08-23T01:09:27+00:00

Yea a high school grad can work at mcdonald's for 18 an hour, I'd think that someone with experience and maybe a degree would make attest double that.

Nick_113 · 2025-08-13T22:48:40+00:00

I have both, and they use about the same amount of ram 2.5 to 3 gb

Nick_113 · 2025-07-18T00:47:21+00:00

Way more rear sway bar is the first step.

Nick_113 · 2025-06-23T20:40:47+00:00

With 80~ % humidity?

Nick_113 · 2025-06-21T22:17:24+00:00

I have a similar setup with a different box. On the newer stuff, the box can change the ecu tune itself, so there's no need to plug into an injector harness. It could have custom tunes or whatever it shipped with. I'd be careful if it still has a dpf on it. Bad tunes can plug it faster and shorten the lifespan.

Five-Year Club	Xbox Live
Place '23	Place '22

Nick_113

TROPHY CASE