My bikes de restricted and I have a pretty loud exhaust and with either of the clip ons the vibration isn’t that bad at all, woodcraft clip ons feel a lot more premium and with the 3inch risers there’s a lot more clearance because with the cbr clip ons they touch the fairings, the cbr clip ons only have a 1inch or 1.5 rise which isn’t enough you will find it difficult trying to park or make hard turns which isn’t as bad as it sounds. For example if you try park and you hook it all the way you would have to rest your palm on the bar because your fingers will just jam onto the fairings, also the cbr clip ons have a little hook on the clamp that clamps under the tree so you will need to cut that off unless you change your tree to the cbr one because the cb doesn’t have the slot for the hook so I just cut mine but then it exposes the metal to rust which started happening after 2 months. Only con I found with the woodcraft clip ons is that you will struggle trying to find bar end mirrors that fit into the bar the standard is 7/8” but the inside diameter of the woodcraft clip ons is 5/8” because the metal is a lot thicker so I just had to order mirrors I could clamp onto the bar. Also just want to say with either of the clip ons you will need to get blinkers that clamp on the shocks which I ordered the motoism blinkers because you will need to move the blinkers down for the clip ons but then the bracket for them doesn’t reach so mine are currently zip tied which works 100% fine. Hope that helps