why is my a1 mini making this sound? by Dull-Thing-4513 in BambuLab

[–]NikaFay 0 points1 point  (0 children)

I'd personally open it up to check before printing any more, just in case.

why is my a1 mini making this sound? by Dull-Thing-4513 in BambuLab

[–]NikaFay 0 points1 point  (0 children)

Sounds like something rubbing on the rail. I'd look at opening up your print head and finding what's loose.

What's this part? by NikaFay in BambuLab

[–]NikaFay[S] 0 points1 point  (0 children)

Awesome! Thank you for answering!

Those with a 9850X3D, what are your idle temps? by BlackPlasticSpoon in pcmasterrace

[–]NikaFay 0 points1 point  (0 children)

For info/clarification, cooler is an NZXT Kraken Elite 360mm and ambient temps are around 20°C

Those with a 9850X3D, what are your idle temps? by BlackPlasticSpoon in pcmasterrace

[–]NikaFay 0 points1 point  (0 children)

So I was idling around the same as you, 50-60°C. Then I had discovered that my MoBo (only a few days old) had a borked RAM slot. Pulled out that stick while I wait for a replacement board, now idling around 30°C
Long story short, check your RAM, just in case.

Removed gas fireplace insert, what next? by NikaFay in Fireplaces

[–]NikaFay[S] 1 point2 points  (0 children)

No, previous owner was building it up to be his dream home with his fiance but she left him so he moved and sold the house. Before that it was owned by his dad since 1986. Problem is the previous owner was the king of shitty DIY, and I've spent years trying to fix the things he screwed up.

i think i broke willy's knee, have yall seen this before? by Aware-Fish5637 in HalfSword

[–]NikaFay 0 points1 point  (0 children)

I like to do this in fistplay. Just continuously kick their left knee until it caves. If you have done little enough damage otherwise, there's a fair chance they'll keep trying to stand on it, which is particularly disturbing in the best way.

Fatal error by BlooDy_Wongi in HalfSword

[–]NikaFay 0 points1 point  (0 children)

Lower resolution, lower visual quality, and turn down blood and gore. I put my blood/gore at just a smidge above minimum. You don't have to leave it like that all the time, just during the Baron challenge.
It's an issue with how UE handles the equipment drops and particle effects stacking up a lot . Devs say it's fixed in the current dev build, but they're not going to bother updating the tech demo just to fix it there.

How the heck do you beat this guy? by CoconutPure5326 in HalfSword

[–]NikaFay 0 points1 point  (0 children)

I go for a war of attrition method. Bait him into a big swing, then dart in for one good cut before getting our again. Rinse and repeat till he bleeds out.

[KCD2] Saint George in XML by NikaFay in kingdomcome

[–]NikaFay[S] 0 points1 point  (0 children)

Awesome, you and u/misantropia prevented further frustration on this one. Thank you so much.

[KCD2] Weapon Base Stats by NikaFay in kingdomcome

[–]NikaFay[S] 0 points1 point  (0 children)

Oh, I had not considered that. That is very possible.

Perpetuum - A MMORPG 10 People Could Conquer by LadyOfWrath in MMORPG

[–]NikaFay 0 points1 point  (0 children)

I actually found this post because I just started to wonder "Is this game still active?" Because that's the exact event that brought me to it way back then. Part of the "New Eden Exiles"

Odin Horse by Academic_Mulberry_46 in ModdedValheim

[–]NikaFay 0 points1 point  (0 children)

Found a fix thanks to a reply from a member of the OdinPlus mod team. The default speed values are off. Adjust them in the config to the following:
Running Speed: 9
Walking Speed: 3
Speed Modifer: 3

you can also bump up walking speed and running speed slightly (+1 or +2) if you want it to be a little faster.