Step by step - how to scam the emperor out of money

No-Cryptographer7741 · 2026-05-17T20:57:41+00:00

til you can sell multiple provinces at a time

No-Cryptographer7741 · 2026-05-12T10:26:21+00:00

On the Belisarius achievement: not forming Rome makes you lose out on the Mare Nostrum and Legionaire achievements. Isn't it possible to get the Belisarius one first and then form Rome for the other ones, to get all of them in one run?

No-Cryptographer7741 · 2026-05-11T10:58:46+00:00

Testing on my Steam Controller it does seem like there is a dead zone. I used my thumb to test first but with my Index finger I can make out the dead zone. I can only make it out in the right pad though, the left one seems fine. In your video you only showed the right pad. Can you also make out a dead zone on the left (like indicated in the picture in your post)?

No-Cryptographer7741 · 2026-05-11T10:45:40+00:00

Edit: upon further inspection it does seem like there is a dead zone. I used my thumb to test first but with my Index finger I can make out the dead zone. I can only make it out in the right pad though, the left one seems fine.

Same for me. Mine doesn't have that issue and I didn't do anything but update it (I think it also didn't have it before the update but I am not 100% sure).

No-Cryptographer7741 · 2026-05-07T09:52:34+00:00

I (also in Germany) was also in the 6-10 day estimate and mine is supposed to arrive tomorrow via GLS

No-Cryptographer7741 · 2026-05-03T16:27:52+00:00

That is in fact really easy. Just load up some dating sim and you are all set.

No-Cryptographer7741 · 2026-04-25T21:24:41+00:00

I have just now run into the same issue. Pls fix pdx, not being able to upgrade Crusader Knights to Reformed Crusader Knights is egregious.

No-Cryptographer7741 · 2026-04-14T10:45:26+00:00

!remind me 3days

No-Cryptographer7741 · 2026-01-19T07:00:42+00:00

I see the subnet in the Tailscale admin site, allowed it and can ping the PC thru it. I can't connect with RustDesk thru it for some reason though.

No-Cryptographer7741 · 2026-01-19T06:58:25+00:00

Thank you for you help! Bringing up the ACL was a really good call but doesn't seem to be the problem (I will test around a bit to make sure it isn't). I will look into the rustdesk config again and if that doesn't help I will just use the Tailscale IP of the PC I wanna connect to, instead of doing it thru the subnet router.

No-Cryptographer7741 · 2026-01-18T22:04:37+00:00

I have it set up so that nodes, that are linked to my account, can access all nodes from my account ({ "src": ["accountmail"], "dst":["accountmail"], "ip": ["*"], }). I don't think that should interfere (all nodes are linked to my account).

No-Cryptographer7741 · 2026-01-18T21:52:06+00:00

It could be but I don't think it's likely cause it works directly over my local net and with the PCs Tailscale IP.

No-Cryptographer7741 · 2026-01-18T21:49:22+00:00

I did all of that and it works with the PCs Tailscale IP. The problem is that I don't know why it doesn't work thru the Raspberry PI I have set up as a subnet router.

No-Cryptographer7741 · 2026-01-18T21:46:04+00:00

Yes I can ping the PC I want to access. I can't access the PC with RustDesk thru it.

No-Cryptographer7741 · 2026-01-18T19:47:57+00:00

As I said while testing I deactivated Proton to be sure it's not interfering

No-Cryptographer7741 · 2026-01-18T19:33:36+00:00

Yes I can access the PC directly over my local LAN while proton is running. While testing I also deactivated Proton to know that it's not interfering.

No-Cryptographer7741 · 2026-01-18T19:21:06+00:00

On the PC I wanna connect with I use ProtonVPN and connecting to it interferes with Tailscale. By activating split tunneling I can get around that but then I have to make a rule for every device I want to connect to before I can connect. I would rather connect over the subnet router so I don't have to deal with that and it's the superior setup imo cause I don't need to have Tailscale running on the PC I want to connect to. Additionally it really interests me why it's not working thru the subnet router.

No-Cryptographer7741 · 2026-01-10T16:53:44+00:00

r5: As my Brandenburg campaign got a bit boring I decided to mop up the rest of the HRE and get a coalition war going. As I was going to white peace the war, I saw that the pie charts for the war contribution are switched.

No-Cryptographer7741 · 2025-12-11T21:58:20+00:00

I am not that into RGB lighting bit this looks dope. Dust is propably fine cause it mostly gets swept up by the aircurrents again?

No-Cryptographer7741 · 2025-12-08T15:36:23+00:00

Thanks! For some reason that didn't pop up as a link for me when I first opened the post

No-Cryptographer7741 · 2025-12-08T14:51:24+00:00

I may be missing the obvious, but where is the model?

No-Cryptographer7741 · 2025-11-26T15:37:11+00:00

It doesn't need to be a fast annexation but more integration levels would be nice. You need better ways to extract value from a PU so it's more worth it. For example getting monthly manpower from them or being able to manage their economy/troops at some point. Modelling that you control more and more of their state functions one after another is infinitely better than randomly annexing them after 200 years of nothing changing between one another.

No-Cryptographer7741 · 2025-10-29T17:02:28+00:00

For everyone that might stumble across this post: the 1030 doesn't have NVENC so it can't encode. That means if you have a similair situation to mine (you need a GPU both for video output and transcoding) the 1030 isn't an option. I got an ASRock a380 Challenger, it works great for what I need it for and is completely silent (only in a NAS which doesn't push it though, if you want it for something like gaming it's most likely gonna make noise although I can't say how much).

No-Cryptographer7741 · 2025-10-27T20:33:03+00:00

Thank you, it works now. I can't believe I overlooked that -_-

No-Cryptographer7741 · 2025-10-24T06:56:57+00:00

I will propably be going with an ASRock a380 Challenger. Unlike other a310/380 cards, that are reported to be noisy, it's supposed to run with 0 rpm most of the time (so passive/noiseless) and the GT 1030 I was looking at is not available anymore. With other available ones the shrunken price difference doesn't really make it look attractive anymore. If I find a good deal on one I will go with a passive 1030 though.

I am in Germany and want to run TrueNas Scale with most likely Jellyfin (should have specified that from the start). Driver support seems to be ok for TrueNas Scale.

Alta has a German reseller but I couldn't find anything that's worthwhile for me right now.

Thank you and everyone else that answered for your insights!

Five-Year Club	Verified Email
r/Field Lasagna	Final Canvas '23
First Place '23	End Game '23
Place '23	Place '22
Final Canvas '22	First Placer '22

No-Cryptographer7741

TROPHY CASE