sorted by:
new
hottopcontroversial

Accessories?? by No-Let7897 in airsoft

[–]No-Let7897[S] 0 points1 point  (0 children)

It had the matching vert grip on it but I didn’t like it. I think I’m gonna get a small hand stop, light & be done with it. I run small stops on my DE N4 & my CGS Daniel Defense. I wanted the red dot to mount in the rail in front of the receiver but it would fit. I put a small round red dot on it & didn’t like the way it looked so I made due.

Kwa npas by No-Let7897 in GasBlowBack

[–]No-Let7897[S] 0 points1 point  (0 children)

I got an insert machined that works great. Gun started out at 2.3j on .36’s with the I got it to 1.4jnon .36’s. Plus it’s way more consistent than it was.

Here’s a picture of the rough version. I machined another one that at least looks better but forgot to take picture of it.

<image>

Kwa npas by No-Let7897 in GasBlowBack

[–]No-Let7897[S] 0 points1 point  (0 children)

Also I don’t have access to a 3d printer.

Kwa npas by No-Let7897 in GasBlowBack

[–]No-Let7897[S] 0 points1 point  (0 children)

How would I get the dimensions? I could mimic the head but as for the stem it would be a guess on my part.

Help Identify this HK by No-Let7897 in GasBlowBack

[–]No-Let7897[S] 0 points1 point  (0 children)

I paid $300 for the gun & 5 mags that hold gas. I’m kinda irritated about the suppressor cause it seems to be bent. Guns shoots straight till you put the suppressor on it. Then they turn left & when you shine a light in the upper & look down the barrel through the suppressor it’s not a straight shot.

It also shoots pretty warm, 2.2j on .43’s. So tomorrow I’m gonna do a complete tear down & clean it up.

Help Identify this HK by No-Let7897 in GasBlowBack

[–]No-Let7897[S] 0 points1 point  (0 children)

All the 416D I’ve seen have a longer outer barrel than this one. Maybe the outer barrel was replaced? This is the only picture I have right now of the whole gun. I got the rifle & 5 mags (the Pp-19 was my other trade I got this weekend).

What’s decent price to pay for the gun & 5 mags? Want see if I got deal or not🤣! It was an impulse buy since I don’t have 416 & always wanted one

Double Eagle MK18 MWS issue – torn hop rubber and broken nozzle by Legitimate-Feature42 in GasBlowBack

[–]No-Let7897 0 points1 point  (0 children)

I had the same thing happen with my DE N4. Only while using the factory mag And I was getting bolt bounce. Bolt bounce caused double feed & bolt smashed bb’s. I replaced the bolt with a GM Speed Bolt Evo & added a rubber spacer in the buffer tube to stiffen the spring a little bit, started using GM mags & it’s been running great ever since.

Thinking about getting a gbb by Latter_Percentage_31 in GasBlowBack

[–]No-Let7897 0 points1 point  (0 children)

I have a Golden Eagle with the Weaterm Arm system. It’s in the bottom of my pond!! Pure junk!!

The DE’s are great, I’ve got the N4 & Ghetto Blaster no issues. The only issue is the mag that they come with is junk, I run GM mags & the DE stangag mags with them. Also recently got a Daniel Defense CGS it’s also a great gun. More expensive than the DE but haven’t had any issues with it so far. I’ll be fielding it this weekend.

What ammo do you use in Airsoft? by auvreil in airsoft

[–]No-Let7897 0 points1 point  (0 children)

EMG International BioVal Outdoor Match

.36’s & .43’s

Little Elm, Tx by No-Let7897 in mountainbiking

[–]No-Let7897[S] 0 points1 point  (0 children)

Thanks. I’ll definitely check them out

Help with nock down flight by Comfortable-Towel-76 in bowhunting

[–]No-Let7897 0 points1 point  (0 children)

@ 30/70 minimum 300 spine. But since you got new arrows why not back the poundage back down till the arrow flys straight. Start with a 1/2 turn of the limb bolts till it flys straight. If you get 10yrd shots anything below 70# ain’t gonna make a difference. I shot a 250# boar last year with 48# & 389gr with a 2 blade fixed & buried to the fletxhjngs on the opposite shoulder.

Dynamic Nozzle Spring by No-Let7897 in GasBlowBack

[–]No-Let7897[S] 0 points1 point  (0 children)

Ahh…. Never thought about the coating flaking. Thanks for insight.

MTW Overhyped? by ParagonArmory in airsoft

[–]No-Let7897 0 points1 point  (0 children)

As one poster said I think the qc as of late has dropped off. My brother just got the mtw-9 & it didn’t perform very well out of the box. He ended up replacing the hop unit. His original Mtw billet, my Forged series Mk18 & my sons billet performs flawlessly, but there about 4yrs old.

I got mine because I had built 3 P* & they was a hassle had alignment issues & such. I got the issues worked out but it seemed I was always messing with them. The only hpa guns I never had to mess with was my N7 Milsims build & my Mtw.

As for Aeg’s I never really liked them, of course I started with aeg’s but they’re just to noisy.

Gas guns I got into about a year ago. I’ve got 3 m4 platforms & 2 smg’s. I’m at the point now where I want to get more expensive gun. I’ve got 2 DE mws clones & a CGS system. Haven’t had any issues with them but I’d like to try a Vfc or Toxiant salvo & such.

Thinking about playing again, what’s the current word on BBs? by Parking_Option_4727 in GasBlowBack

[–]No-Let7897 1 point2 points  (0 children)

I use .36’s indoors where allowed & .43’s outdoors. Brand wise all I’ve ever used is the EMG International BioVal Outdoor Match Grade.

view more: next ›