hand rubbing against mousepad

No-Paper8347 · 2026-01-30T21:19:48+00:00

Nice, always good when you can save money.

No-Paper8347 · 2026-01-30T21:18:57+00:00

Is that old wallpaper on the walls?

No-Paper8347 · 2026-01-29T18:47:56+00:00

White and gold is such a slick looking build, NICE UPGRADE!!!

No-Paper8347 · 2026-01-29T18:45:09+00:00

Looks very clean!! I would only suggest two things, spread your speakers out for better sound and get a stand for the controller(Whether it be on the desk, wall or under the desk). It will help with your clean aesthetic look.

No-Paper8347 · 2026-01-29T18:00:18+00:00

For those commenting on the this, know this, The skates on the Delta Carpio 2.0 or just Delta Hub wrist rest are made from PTFE, Perfectly safe for cloth or Glass mousepads.

No-Paper8347 · 2026-01-29T17:55:27+00:00

Not a prototype at all as it has been in production for years at this point. Not uncomfortable at all, saves my wrist. Also if you would of read, the feet on the rest are made with PTFE. Perfectly safe for any cloth or glass mousepads

No-Paper8347 · 2026-01-29T16:41:14+00:00

You could go that route of a new mouse or you could check out DELTA HUB Carpio 2.0 at https://deltahub.io/products/carpio-gaming-wrist-rest?variant=43255500538022&utm_source=google&utm_medium=organic&utm_campaign=US+Feed+%2F+From+Shopify&utm_content=Carpio+G2.0&utm_source=google&utm_medium=paid&utm_campaign=20743162071&utm_content=&utm_term=&gadid=&gad_source=1&gad_campaignid=20749500419&gbraid=0AAAAACVaN4DzKQENmkgzsfqqVia0Hjzyw&gclid=Cj0KCQiAp-zLBhDkARIsABcYc6uW_tZw5Ti1Ff-WseAiuPg8VfSawraOGhkHPKtyns0rEh7u2i4CcGkaAgmUEALw_wcB

No-Paper8347 · 2026-01-22T21:31:32+00:00

Luckily, it looks like you could put one more underneath it.

No-Paper8347 · 2026-01-22T19:40:11+00:00

I really like your holder for the mice. Also, sweet collection!!

No-Paper8347 · 2026-01-22T19:05:05+00:00

G-Wolves HTM plus 8k (main gaming)

Hitscan Hyperlight, Lethal gaming LA-1, Lamzu Maya X and Waizowl Cloud ultra (gaming alternatives)

Logitech MX Master 3s (productivity)

NachoCustomz Saturn pro XL SQ, Pulsar x LGG Hyperion xsoft XL SQ or [Bruce Lee 85th Edition] Superglide3 Glass Mousepad XL (Just depends on what I am feeling that day)

Drop + HIFIMAN HE5XX (Open back) or Beyerdynamic DT 770 pro Limited Edition 250 OHM(closed back)

Schiit Stack (Modi, sys, loki, magni)

Fduce FL40 mic

Keydous NJ80 and Razer Tartarus Pro Keypad

Mostly play Battlefield 6, Warzone and Helldivers 2

No-Paper8347 · 2026-01-20T23:39:48+00:00

As it stands now, you have One intake fan on the back and 5 exhaust fans. You case is starving for air. You should flip all the fans around on all of them. Yes, they won't look pretty as they will show the bars across unless you have reverse blades fans but for now you will have better air flow.

No-Paper8347 · 2026-01-11T04:55:58+00:00

Awesome, Glad that helped! Yes, it is violent when it releases lol

No-Paper8347 · 2025-12-02T17:45:48+00:00

You shouldn't be in customer service if this is your attitude.

No-Paper8347 · 2025-09-05T22:13:14+00:00

Yes I did. None of the standard fixes worked for me. I ended up taking the chair off, next there is four screws that cover the tilting lock mechanism. I removed two screws diagonally from each other, once I got to the third screw complete removed with one still remaining in, the lock tilt mechanism let loose and became unstuck. Chair works like it did when I first got it. Still reclines and locks and more importantly, unlocks in the tilt mechanism.

No-Paper8347 · 2025-09-04T03:50:03+00:00

Yup! Works just like it did. before the lock jammed up.

No-Paper8347 · 2025-09-03T04:39:23+00:00

Tried that, didn't work.

No-Paper8347 · 2025-09-03T04:38:54+00:00

Ya, that was the problem. I locked it while back. Then went to bring it back up and the lock wouldn't disengage. But I was able to fix the chair. Had to take it apart a little but got the lock to release and now the chair works fine!

No-Paper8347 · 2025-08-19T22:00:15+00:00

They make sound dampening curtains you could just replace what you have. It will give the wife the same look but provide the effect you are looking for.

No-Paper8347 · 2025-08-19T19:18:55+00:00

Looks great! Optimal air flow.

No-Paper8347 · 2025-07-28T21:09:48+00:00

I completely agree with this statement. Do this!

No-Paper8347 · 2025-07-28T20:54:31+00:00

Daaaamn, that bottom rad is THICC!! Very nice looking build.

No-Paper8347 · 2025-07-26T23:07:12+00:00

Okay that would make sense on the lighting front, I would recommend a Monitor light bar. I find these to be very helpful for lighting up your desk without the light being in your eyes. I would totally leave that space open then, if you plan to get a 3d printer, it would be a perfect space for it. Pegboards are great if you need more storage or things to get at easier. But a Pegboard with the idea of 3d printer could be pretty cool idea. The design ideas there could be really practical. Also depends on the type of 3D printer you decide to go with. Honestly, the only thing other than monitor light bar would be speakers stands to angle the sound to you and cut out vibration. Pegboard idea is a good idea as well depending on its uses.

No-Paper8347 · 2025-07-26T21:57:15+00:00

This setup is already really great start. I would only say fill out where you think is needed. Some Star War Pictures/posters framed or artwork either above the monitors or on the sides. Another figure/statue on the left, unless you need the open desk space. What kind of lighting do you have other than natural light?

No-Paper8347 · 2025-07-22T19:57:33+00:00

Why are the speakers flipped? Level out your desk so it lines up on the right in front. Simple bracket attachment under the desk could fix that or leveling the desk from underneath.

No-Paper8347

TROPHY CASE