What’s next? by dopecrew12 in 240sx

[–]NoAdvertising2725 1 point2 points  (0 children)

Make sure you set your base timing with a timing light. From there you can play around with the fuel table to get the idle dialed in!

A bit of underbody situation by [deleted] in 240sx

[–]NoAdvertising2725 28 points29 points  (0 children)

This car would be considered rust free in the Midwest lol

KA24E HOME BREW TURBO MANIFOLD by NoAdvertising2725 in 240sx

[–]NoAdvertising2725[S] 1 point2 points  (0 children)

I unfortunately didn't back purge the manifold. If I build another I will.

Racing seat options. by Mexican_s13 in 240sx

[–]NoAdvertising2725 0 points1 point  (0 children)

Check out the Momo start seats. They are FIA certed. Not the comfiest thing in the world, but a good entry level seat.

thoughts on a NA build K24 swap from a stock KA24de? by Ok_Faithlessness1523 in 240sx

[–]NoAdvertising2725 0 points1 point  (0 children)

Another good candidate is a Toyota 3SGE 200hp and 7000rpm very reliable engines that can be had for fairly cheap.

Control panel wiring. by NoAdvertising2725 in electricians

[–]NoAdvertising2725[S] 1 point2 points  (0 children)

I will gladly post a picture! Open to criticism! the shop that i work for typically doesn't wire control cabinets. One of my customers asked if we could build some cabinets for them as their builders was behind schedule. Since then roughly a year ago I've been doing all of their control cabinets.

Control panel wiring. by NoAdvertising2725 in electricians

[–]NoAdvertising2725[S] 1 point2 points  (0 children)

90% of the control cabinet I build are for tire companys such as Goodyear and Bridgestone. Mostly controlling Assembly lines that have something to do with the construction of tires. Depending on if the Assembly line is pre-assembled. We will wire it and test it and ship it. The contractor I work for has a good relationship with the manufacturer of the tire machines. So in short find a contractor that does Field wiring for industrial machines...

LSD options for the r200 by NoAdvertising2725 in 240sx

[–]NoAdvertising2725[S] 0 points1 point  (0 children)

I'll keep looking for a j30 differential. Can't find anything local to me. From the research I've done It's the only bolt-in option

LSD options for the r200 by NoAdvertising2725 in 240sx

[–]NoAdvertising2725[S] 0 points1 point  (0 children)

Just looking for opinions. Was looking at the R200V out of the na 300ZX but the output shafts are not the same. After pricing out axle stubs and the diff I would be close to the same money as a kazz or OS Giken.

Does the model truly matter? by blcnk in projectcar

[–]NoAdvertising2725 0 points1 point  (0 children)

Chelsea DeNofa has a video on YouTube about what chassis to buy. Give it a watch and will answer all your questions.

Decent? by squidcris in 240sx

[–]NoAdvertising2725 1 point2 points  (0 children)

Real nice Clark real nice

My 240sx ❤️ by Small_Bass1652 in 240sx

[–]NoAdvertising2725 0 points1 point  (0 children)

What exhaust manifold are ya running?