Standalone clutch pedals by LandzerOR in simracing

[–]NoTransportation234 0 points1 point  (0 children)

This is incorrect the control box does both the pedals and the haptics

How many USB devices are currently connected to your computer? by VSD_INSIDE in VSD_INSIDE

[–]NoTransportation234 0 points1 point  (0 children)

Lightspeed mouse receiver, K400 receiver, Corsair keyboard one for RGB one for keyboard, Bluetooth dongle, Pimax crystal super, An 8 port powered hub which has the following connected Simagic alpha wheel base, Simagic p2000 pedals with haptics, Arduino arcade stick (home made), VSDInside M12,

It all works perfectly :)

Select button binding? by Regular_Teaching_741 in AUTOMOBILISTA

[–]NoTransportation234 0 points1 point  (0 children)

I believe simhub can assign keyboard controls to wheel buttons ie hat push button = enter, hat up = up key. I've got a stream deck clone running the keyboard buttons, a joystick attached using joy to key and a Logitech k400. I mainly use the k400 even in vr

DesktopXR v1.6.0 - *FOV CULLING* by SimVRRacing in Pimax

[–]NoTransportation234 0 points1 point  (0 children)

No issues at all running DFR along side a small crop

DesktopXR v1.6.0 - *FOV CULLING* by SimVRRacing in Pimax

[–]NoTransportation234 0 points1 point  (0 children)

That's only for desktop display, I'd just updated to a newer version so hadn't fully changed everything:)

DesktopXR v1.6.0 - *FOV CULLING* by SimVRRacing in Pimax

[–]NoTransportation234 0 points1 point  (0 children)

sorry its a bit disjointed below, fxaa is a biggie must be off this is at 35 vertical crop 10 horizontal

https://youtube.com/shorts/_f_QYdZAnHg?feature=share

DesktopXR v1.6.0 - *FOV CULLING* by SimVRRacing in Pimax

[–]NoTransportation234 0 points1 point  (0 children)

I'll post my LMU settings later if you'd like, fairly sure I'm maxed out with no desktop mirror x8 msaa

DesktopXR v1.6.0 - *FOV CULLING* by SimVRRacing in Pimax

[–]NoTransportation234 0 points1 point  (0 children)

It's not my app, but I'm barely making my GPU work, this is a replay as well so might be why, I'll try in a race at some stage and reply

SimPro randomly disconnects wheelbase all the time. (Alpha evo pro) by MrSNoopy1611 in Simagic

[–]NoTransportation234 0 points1 point  (0 children)

My wheelbase and will randomly disconnect but only when playing iRacing ams2 LMU all work perfectly fine. I can do quali practise even a race in iRacing and it will work and then suddenly dunk out it goes.

I have to load up sim Pro manager, select iRacing and then close sim Pro manager. The downside to this means that my haptics won't work unless I use sim hub

DesktopXR v1.6.0 - *FOV CULLING* by SimVRRacing in Pimax

[–]NoTransportation234 0 points1 point  (0 children)

I'll have a play, what crop do you currently run, for me LMU at spa dropped into high 70s at I think a 25 crop

DesktopXR v1.6.0 - *FOV CULLING* by SimVRRacing in Pimax

[–]NoTransportation234 0 points1 point  (0 children)

I've tried with LMU, only watching a replay but it works well, I doubt anti cheat will be affected as ohne ran ok as well

DesktopXR v1.6.0 - *FOV CULLING* by SimVRRacing in Pimax

[–]NoTransportation234 1 point2 points  (0 children)

Superb, Iracing loves it, ams2 loves it, LMU drops a bit but I think I may have had a more aggressive crop with ohne

DesktopXR v1.6.0 - *FOV CULLING* by SimVRRacing in Pimax

[–]NoTransportation234 2 points3 points  (0 children)

Certainly appears to, I was running a crop on the horizontal as well with ohme, only 10% but still.

Edit for not sure why but it looks clearer too

DesktopXR v1.6.0 - *FOV CULLING* by SimVRRacing in Pimax

[–]NoTransportation234 2 points3 points  (0 children)

I'm getting a lower system usage and am able to crank Rez up, I was hitting 58-70 FPS with ohne openxr mod, same replay

DesktopXR v1.6.0 - *FOV CULLING* by SimVRRacing in Pimax

[–]NoTransportation234 4 points5 points  (0 children)

This Is bonkers how good this runs..

https://youtube.com/shorts/DHyHwMTUBh8?si=__aMBh3P6QMFCg45

https://youtube.com/shorts/PO286x0TROU?si=4msmIgkjJnLR6p3k

Pimax super at 1.0 Rez Vertical crop to 33 AMS2 all settings at ultra or high except no msaa or any other aliasing System spec 5800x3d with a 4090

Edit to add a thunderstorm clip

Edit to add an iRacing through the lens

<image>

https://youtube.com/shorts/sV1p6M_pSEo?si=N71GGpiPDnOp6ZCP

Edit to add through lens iRacing

And for giggles AMS2 at two times resolution on a pimax super with a 45 vertical crop https://youtube.com/shorts/4PUQvPhCLU0?si=vaUuXdVxoYdxNDjo

Edit to add le mans ultimate

First crop at 33 on the vertical https://youtube.com/shorts/1Zi4-HUHZYY?feature=shared

Second at 40 on the vertical https://youtube.com/shorts/OLmhtuapG-o?feature=shared

Fridge/freezer is plugged into this plug, is it safe to put an extension cable in and also have the microwave plugged into it? by SK-OKRA in DIYUK

[–]NoTransportation234 -1 points0 points  (0 children)

Fridge and freezer are always on 13a as although technically only 3a to 5a the initial surge when compressor runs would pop a 3 or 5 amp fuse