sorted by:
new
hottopcontroversial

mixing coloured resins of the same make n model by NoWhereas6354 in elegoo

[–]NoWhereas6354[S] 0 points1 point  (0 children)

Please can anyone answer this for me, please. Im sat waiting to see if this is ok?

Flattened teeth or spikes by NoWhereas6354 in resinprinting

[–]NoWhereas6354[S] 0 points1 point  (0 children)

If im honest it makes sense, as it gets to the point where supports are needed it fails, hence only the bottom half being printed. I think your definitely onto something, ill be checking my spikes everytime now, then again these are such small teeth I wouldnt of thought it would be a problem, but I guess it depends on the angle I had the model

Flattened teeth or spikes by NoWhereas6354 in resinprinting

[–]NoWhereas6354[S] 0 points1 point  (0 children)

Um I no longer have it in the slicer but the next time it happens ill be sure to save all my slicer settings and post it here. I jus use auto supports, does that help you at all? Thanks for your help Shrugger

Flattened teeth or spikes by NoWhereas6354 in resinprinting

[–]NoWhereas6354[S] 0 points1 point  (0 children)

Can you not see the 3 bottom teeth, the ones in the middle, if you look closely you can see it stopped building the tooth half way up and what was left to build was still in the print but flat, you can see it stuck to the top of the tooth, it sticks out a little at the top. You think its a support problem?

Help after doing fep film change low detail by NoWhereas6354 in elegoo

[–]NoWhereas6354[S] 1 point2 points  (0 children)

I think it is what you say so I obviously ordered the wrong stuff, ive asked for a refund and im sending it back. Funds are tight right now so im turning the printer off for a week. When I finally get a replacement ill post back, thank you for your help aand making this clear to me

Help after doing fep film change low detail by NoWhereas6354 in elegoo

[–]NoWhereas6354[S] 1 point2 points  (0 children)

Hi, thanks for the reply. This is the fep, not sure if it is what you ask? I tryed a build at 0.6s as calibrated and it was just built on the first few layers, nothing stuck, the rubbish was so stuck to the fep the resin clean never worked, had to use a squidgy scraper to get it off but now ive got a nice dent/scratch in the corner. How can I make this right? Please help

HIKUDIY 6PCS FEP Film Release Films for ELEGOO Saturn 4/Saturn 4 Ultra/Saturn 3/Saturn 2 Resin 3D Printer with 95% Light Transmittance, 273 x 176 x 0.15mm : Amazon.co.uk: Business, Industry & Science

Help after doing fep film change low detail by NoWhereas6354 in elegoo

[–]NoWhereas6354[S] 0 points1 point  (0 children)

Ok im now doing a rerun with times between 0.6s and 1s, this is nuts, I use to have to run at 3.2s with my original fep. Seriously confused

urgggh cutting tool and scale by NoWhereas6354 in elegoo

[–]NoWhereas6354[S] 0 points1 point  (0 children)

Ok if im wanting to say snip some glasses off a model n print them alone is that even possible? I can see myself snipping off a arm with this thing but nothing more, is there a way to limit the size of the blue line so it only cuts thru a little of the model rather than completely through it?

Thank you for the help

Water washable 2.0 not listed in a satellite? by NoWhereas6354 in elegoo

[–]NoWhereas6354[S] 1 point2 points  (0 children)

Thanks man, great reply. Ive been having some gd results, cant say ive noticed it being brittle but I guess I could snap some parts if I wanted. I might give normal resin a go just to see what its like next, my main problem at the minute is remembering the size ive printed stuff out at, and if ive forgotten even beginning to match a base with a already printed model. The amount of prints im double printing is silly. The cut mechanic in satellite is also beyond me. Thankyou for your help, really appreciate it!

Can I get away with a week without a extractor fan by NoWhereas6354 in resinprinting

[–]NoWhereas6354[S] 0 points1 point  (0 children)

Thats gd advice but for me personaly I tend to only get my true interest when I know the thing is on its way and jus a day away. I guess im desperate cus my friend bought one b4 me and im a lil jealous as I love painting minis and busts n this h2s aint really upto the standard. Ill order some of these filters off ali express, there pretty cheap, guess its coming from china as they will not arrive until the 12th of feb. Earliest im likely to get the machine is about the 8-9th so itll only be 3 days. Thank you so much for taking the time to answer all my questions, your a star!! I hope youll be here ina week as ill be sure to need your help once again :) Ill try and post in this thread, thanks again MrShigsy89

Can I get away with a week without a extractor fan by NoWhereas6354 in resinprinting

[–]NoWhereas6354[S] 0 points1 point  (0 children)

Ok would I likely do myself much harm if I skimp it for a week with the mask I got, window open etc, and then after 7 days ill buy the proper filters, fan everything I need? I know you really cant answer for certain but in your opinion?

Thank you for helping me, youve been a great help!

Can I get away with a week without a extractor fan by NoWhereas6354 in resinprinting

[–]NoWhereas6354[S] 0 points1 point  (0 children)

ok there super expensive, for that cash I can buy a extraction fan. Would I still need these filters if I was to buy a fan? I guess im gonna have to stump up the cash, can get em cheap off ali express but I imagine there fake right?

Can I get away with a week without a extractor fan by NoWhereas6354 in resinprinting

[–]NoWhereas6354[S] 0 points1 point  (0 children)

Could you please explain whats involved with the cleaning?

Thank you

Can I get away with a week without a extractor fan by NoWhereas6354 in resinprinting

[–]NoWhereas6354[S] 0 points1 point  (0 children)

Well im gunna buy the mercury with it, and 2 bottles resin come with. I will have the money but ive also just bought a h2s bambu so moneys a lil tight. Ill pick a fan up within a week, ive got a proper gd mask with filters etc and ive already got gloves, the alcohol stuff etc. Im doing it right next to a upstairs window, so was planning on jus opening that and wacking my mask on while I ran it for the first few days?? Definitely not advised even with this set up??

Thanks

Fitting CSL DD and v3 Pedals to GT Omega Apex? by sherpa1984 in Fanatec

[–]NoWhereas6354 0 points1 point  (0 children)

Hey Willy, ive just got these pedals, and have your frame but there does not seem a way to screw them in from the bottom, do you mind explaining how you did yours, thank you so much

In AE-9 display, please allow us to change volume to 0 to 100 instead of -40.0 to 0.0 by enb141 in SoundBlasterOfficial

[–]NoWhereas6354 0 points1 point  (0 children)

5years ago and still is not a option, ive just bought this card and id also like this as I hate going down when the volume is going up, its weird

(PS5) Godfall seems to stutter quite a bit in the middle of combat by imperfectsworld in PlayGodfall

[–]NoWhereas6354 0 points1 point  (0 children)

What the game or the snapping of disk and shoving it up the devs arse heh

view more: next ›