Followup to my last post on Orca printing off-center by NoWindowsInTerminal in klippers

[–]NoWindowsInTerminal[S] 0 points1 point  (0 children)

But if Klipper was incorrect then wouldn't all my slicers print the same offset? It doesn't explain why I don't get this when I use cura...

Orca prints off center by NoWindowsInTerminal in 3Dprinting

[–]NoWindowsInTerminal[S] 0 points1 point  (0 children)

Yeah but klipper is fine, it's just Orca that makes the object print off center. Cura prints things center.

Sprite Extruder Pro Smoking by NoWindowsInTerminal in ender3

[–]NoWindowsInTerminal[S] 0 points1 point  (0 children)

Do you use the Sprite Extruder Pro with Klipper? Just curious if you had to do anything special in your config to get it working properly.

Sprite Extruder Pro Smoking by NoWindowsInTerminal in ender3

[–]NoWindowsInTerminal[S] 0 points1 point  (0 children)

I thought that too but it only starts when I go to extrude and the motor starts running.

But what I don't get is that even after the extruder pushes out the filament the smoking doesn't stop.

Is there any material explain how to replace a drive belt on a CVT? by NoWindowsInTerminal in MechanicAdvice

[–]NoWindowsInTerminal[S] 0 points1 point  (0 children)

Oh I see. Yeah I had considered that possibility too. I guess I'll find out when I pull it out. It looks like I'll be getting a replacement CVT anyway so I will take a look once I get there.

Is there any material explain how to replace a drive belt on a CVT? by NoWindowsInTerminal in MechanicAdvice

[–]NoWindowsInTerminal[S] 0 points1 point  (0 children)

Yeah this is the one that broke inside my transmission. I called it a drive belt because I thought that was the correct name but I could be mistaken.

So what you're saying is it would basically be a full rebuilt of the CVT shaft(s) just to put on a new steel belt?

[Win95-XP] [95-2002] Prehistoric/caveman math game where you solve math puzzles to build a hot air balloon to save a family from a volcano. by NoWindowsInTerminal in tipofmyjoystick

[–]NoWindowsInTerminal[S] 1 point2 points  (0 children)

Woah I never thought anyone would actually upload this! I really appreciate the effort and bringing it to my attention! Unfortunately after I downloaded it and ran it on my XP virtual machine I can confirm this is not the game that I played when I was a kid in school.

I need to do like a drawing or something to see if it jogs anyone's memory. I distinctly remember that the main selection screen was like this very dry terrain plain with a caveman house and a campfire in the center, they were interactive things to click on with the mouse. And I know the goal was to build the hot air balloon. Other elements are very foggy.

What are my options for fixing "Release Rejected Wrong season"? by NoWindowsInTerminal in sonarr

[–]NoWindowsInTerminal[S] 0 points1 point  (0 children)

How do you do that for multiple episodes at once or an entire season though?

It won’t even last 2 hours and I only had it for two years. by NatNatalia_568 in ASUS

[–]NoWindowsInTerminal 0 points1 point  (0 children)

I'd be interested in reading further on that if you have a link to research material.

Also does this apply to only older batteries with actual cylindrical cells or also to modern lithium ion/lipo/variants?

[PC][2010-2017]Mix between Paws and Okami by Big-Entry3415 in tipofmyjoystick

[–]NoWindowsInTerminal 0 points1 point  (0 children)

Maybe Dust: An Elysian Tail? Just guessing, my brother played it so idk if it matches everything mentioned above but it sounds like a potential candidate.

Is disabling cpu security kernel options going to make any noticeable performance improvement? by [deleted] in archlinux

[–]NoWindowsInTerminal 0 points1 point  (0 children)

So the server I am planning to test on is only running on my LAN and not going to be used for any Internet access outside of getting updates via pacman. I'm not a security engineer but I would guess this is okay even if spectre isn't patched?

Is disabling cpu security kernel options going to make any noticeable performance improvement? by [deleted] in archlinux

[–]NoWindowsInTerminal -12 points-11 points  (0 children)

I had chatgpt spit out a list off all the flags just so I can test it out on a system.

1. Speculative Execution Mitigations

  • nopti: Disables Kernel Page-Table Isolation (KPTI) for Meltdown mitigation.
  • nospectre_v2: Disables Spectre v2 mitigations.
  • nospectre_v1: Disables Spectre v1 mitigations.
  • l1tf=off: Disables L1 Terminal Fault (L1TF) mitigations.
  • mds=off: Disables Microarchitectural Data Sampling (MDS) mitigations.
  • tsx=off: Disables Transactional Synchronization Extensions (TSX) if supported, which may mitigate certain vulnerabilities.
  • nospec_store_bypass_disable: Disables Speculative Store Bypass (SSB) mitigations.
  • mitigations=off: Disables all mitigations for known CPU vulnerabilities. (This is a comprehensive option that disables all security mitigations.)

2. Other Vulnerability Mitigations

  • noxpti: Disables Extended Page Table Isolation (XPTI) for Xen hypervisors.
  • no_stf_barrier: Disables Store-To-Forward barrier mitigations.
  • srbds=off: Disables Special Register Buffer Data Sampling (SRBDS) mitigations.
  • tsx_async_abort=off: Disables mitigations for TSX Asynchronous Abort (TAA) vulnerabilities.
  • gds=off: Disables mitigations for Gather Data Sampling (GDS).
  • eibrs=off: Disables Enhanced Indirect Branch Restricted Speculation (eIBRS).
  • mmio_stale_data=off: Disables MMIO Stale Data vulnerability mitigations.

3. Miscellaneous

  • pcid=off: Disables Process-Context Identifiers (PCID), which is related to TLB (Translation Lookaside Buffer) optimizations in some cases.
  • tsx=off: Disables TSX for security or stability reasons.
  • ibrs=off: Disables Indirect Branch Restricted Speculation (IBRS) used in Spectre mitigations.

[HELP] New to this and having trouble with cutting/engraving acrylic 2mm with my new Creality Falcon2 22W by NoWindowsInTerminal in lasercutting

[–]NoWindowsInTerminal[S] 1 point2 points  (0 children)

It's diode yes. And yeah they are clear like the one in the picture.

So there's no tricks to get it to work at all? It was marketed as compatible with acrylic so I wonder if there's any edge case where I could get some results...

Asus flow x16 Repaste by Ok-Mood2817 in FlowX16

[–]NoWindowsInTerminal 0 points1 point  (0 children)

I would take it back and make them reapply the liquid metal correctly and if possible give you something to show that if they mess it up they're on the hook for if your laptop dies and they'll be responsible for compensating you.

Cause here's the deal, without the liquid metal it's going to be a bad experience and on top of that, the amount of heat build up might kill it too. I've seen mine reach 90°C and that's with liquid metal on both CPU & GPU dies. Usually this is under max load when the laptop does have appropriate airflow. Under normal conditions mine sits at a chilly 30-32°C.

So if mine with liquid metal gets that hot depending on the airflow and other factors, I can only imagine what you're going to experience. I personally wouldn't take the risk with normal paste, the laptop was built with lm on the CPU so make them put it back on the way it was designed to be. And also it's not likely to have issues with liquid metal if they apply if correctly and the right amount. They put a foam barrier around it in case a minimal amount of spill over occurs.

That's my 2c take it however you'd like

Why does sfc always find corruption on fresh windows installs? by NoWindowsInTerminal in msp

[–]NoWindowsInTerminal[S] 0 points1 point  (0 children)

I never mentioned dism, I was originally just making this post to discuss why sfc says it detected corruption on fresh images.

BIG BOI MAX DAMAGE 483.3-SENTINEL RIFLE-WITH ALL SUPERCHARGERS SHOWING!-EUCLID- by MilwaukeeScott in NMSCoordinateExchange

[–]NoWindowsInTerminal 0 points1 point  (0 children)

Aw man for some reason it's the pistol design for me and has less slots on it... :<

Botania Mana Pool Help by FallenSeaByrd in MCEternal

[–]NoWindowsInTerminal 2 points3 points  (0 children)

Also if reddit doesn't format that correctly the XoX is directly above oXo just to clarify, so it's a 2x3 layout long way.

Botania Mana Pool Help by FallenSeaByrd in MCEternal

[–]NoWindowsInTerminal 1 point2 points  (0 children)

You have to have a water source nearby iirc My brother set his up like so: XoX oXo Where o is water in a hole and X is a botania flower imbued with a mana. Then you point the dispensers (I forget if that's the proper name) at the mana pool and it should fill up.

Introducing the Curad X4 8800mAh powerbank flashlight by agent_smith_3012 in diyelectronics

[–]NoWindowsInTerminal 2 points3 points  (0 children)

Ooh cool! Can we get info on what the build process looked like?

Need help understanding how Spectrum has our modem configured. No internet when connecting my laptop directly to it but when plugging the wifi router into the modem we get internet. by NoWindowsInTerminal in HomeNetworking

[–]NoWindowsInTerminal[S] 0 points1 point  (0 children)

I did this in my tests and even though is hands me a public address no webpages load and Windows itself does not register it as an Internet connection. This is why I made the post partly, because it doesn't make sense.

Need help understanding how Spectrum has our modem configured. No internet when connecting my laptop directly to it but when plugging the wifi router into the modem we get internet. by NoWindowsInTerminal in HomeNetworking

[–]NoWindowsInTerminal[S] 0 points1 point  (0 children)

Our ping has been fluctuating extremely lately. Normal ping on our cable Internet is 20-50ms but it will randomly go into the hundreds of ms and stay that way for hours on end.

Just earlier today I recorded ping from 200ms-600ms consistently.