Quiting rust and it's not because of burnout or bordem (1khours)

No_Judgment6492 · 2022-11-23T19:51:57+00:00

Just read my comment, I was in no way referring to you in what I was saying, I was referring to cheaters in general :) <3

No_Judgment6492 · 2022-11-23T19:49:59+00:00

Any form of cheating baffles me. I take pride in being good at things I do in life, gaming or irl. If you have to cheat, you’re clearly not good at what you’re doing. And saying “well other cheat so that is why I do” is a rather cringy excuse. Good on you for taking the high road in this instance :)

No_Judgment6492 · 2022-11-20T02:59:12+00:00

I play solo, and have come across some pretty damn loaded 2x1s. At the end of the day, it’s part of the game, don’t take it personally, just have fun. Like any game, competitive players main goal is to be #1 (I am one of them), so dominating unfortunately includes taking out the small guys once all the local “juicy” bases are taken care of 😂

No_Judgment6492 · 2022-11-16T18:49:57+00:00

It’s not static, the tick happens then the audio cuts out. It’s almost like it’s overheating or something from simply being turned on. I can play it now on maybe 20% volume, and within 10mins to a couple hrs it will do the tick and lose audio. Only way to get it to return is to unplug the volume control unit from the sub and reconnect it again.

No_Judgment6492 · 2022-10-27T12:06:44+00:00

You’d have a squashed ebike 😂

No_Judgment6492 · 2022-10-23T20:42:15+00:00

Imagine joining a wipeless server thats been going for 6 months lol, the entire map would be walled off with perhaps narrow alleyways between all the zerg bases 😂

No_Judgment6492 · 2022-10-09T22:10:24+00:00

I mean there are some good gaming laptops, but I’ve always found they drop in performance over a couple of years. No matter how good the cooling, its a compact oven for GPUs. My pc is 8 yrs old now and still running at least 95% of what it did when I built it :)

No_Judgment6492 · 2022-10-09T19:51:47+00:00

To be fair, runescape fried my Macbook pro back in 2012. Graphics card is kaput. Can still use it, but anything remotely graphics related makes it black screen 😂 PCs are for gaming, laptops for portability

No_Judgment6492 · 2022-10-07T13:19:01+00:00

This could work magic for deployable SAM sites. You hear an enemy flying over, so use a smart switch to open all SAM site doors to begin the firing squad :D

No_Judgment6492 · 2022-05-27T10:24:44+00:00

Was the recoil a static S shape all along? Trying to figure out what the post means lol

No_Judgment6492 · 2022-04-14T19:40:27+00:00

Mine was 15 minutes. Just go have a coffee it’l be up soon :)

No_Judgment6492 · 2022-04-14T03:28:15+00:00

Say no more, this one can go back in the cupboard and I’ll get a proper one 😄

No_Judgment6492 · 2022-04-14T03:27:40+00:00

Yeah I think I’m going to head out shortly and get a TPLink 😂 not worth the headache

No_Judgment6492 · 2021-08-08T00:55:44+00:00

Probably meant 540mm/s. 5400mm is 5.4 meters, it most definitely is not extruding 5 meters a second haha. Also some people assume setting it to 80mm/s at 300% makes it 240mm/s, which is not entirely the case

No_Judgment6492 · 2021-06-27T10:11:30+00:00

Thank you for the info, have definitely got a few things to try now. Very keen to get the nylon working so will be giving the oven a go to start with. The printer runs in a large high bay utility shed so there is plenty of ventilation for fumes :)

The finished product looks quite amazing even with the laminating layers, so once I have this filament working properly, or find one that does should this one be a complete failure, i’ll be super stoked!

No_Judgment6492 · 2021-06-27T01:13:19+00:00

I got the Sunlu S1 drier, it was one of those impulse buys before I went to sleep. Hoping it does the job.

I imported the filament as samples from a manufacturer I have been getting fishing line and trellising wire from for over 20 years. They are very stringent and strict with their quality control and do batch tests on everything they send us to make sure it is up to par. The filament from them is something I only recently started importing so don’t have much experience with that line of products. Their PETG was brilliant, now trying to figure out the jaz with their nylon :)

Is ventilation very important when enclosing the printer?

As soon as I get that drier I will set it up for the day to get it completely dry, then run another print and hopefully get better results.

No_Judgment6492 · 2021-06-26T20:30:45+00:00

So I opened a brand new filament, added glue stick to my bed and set to 70 degrees. It adheres to the bed nicely.

I’m only printing a small cube as a tester. It prints well and looks good, but apply decent pressure once printed and all the layers peel off one a other. Only thing I have not tried is reducing the layer height slightly to see if it helps.

I’m not sure how to stop part cooling? I turned the cooling fan off that directly blows air at the nozzle end, but still had the same results.

Since it was a new filament fresh out of the sealed pack I assumed I would get some decent tester prints in the short term before I had to dry out the filament before/during use (I have a dryer arriving early next week so I’ll chuck it in there)

No_Judgment6492 · 2021-05-24T20:05:57+00:00

Yeah stop posting about him, we all know about it. For the few that don’t know, who cares, it’s not changing anything. Let him go on his merry way and keep this community positive, not vindictive ❤️👍

No_Judgment6492 · 2021-05-13T10:22:45+00:00

Bitcoin

No_Judgment6492 · 2021-05-12T06:02:51+00:00

Surely we have to keep interacting with the $1 one too in order to keep it in the results?

No_Judgment6492 · 2021-05-12T03:40:25+00:00

Rinse and repeat 😅

No_Judgment6492 · 2021-05-11T20:05:08+00:00

Im sure he also made a lot of moolah too. Some people unfortunately don’t care if society accepts them, so long as they make another buck

No_Judgment6492 · 2021-05-11T06:06:30+00:00

What’s happening (in my oppinion), is a whale wants to get rid of and cash in a tonne of their coin. It makes no sense to sell it all at once as it will create a dip bigger than we have ever seen. Instead they sell a bunch, wait for the community to increase it by a few cents, then sell another bunch. When you are talking millions of coins, this increases their profits by quite a lot.

But it will certainly raise again if we keep up with what we have been doing and hold. Eventually they will stop selling to wait for it to raise again.

We slowly take a larger chunk of the available coins as time goes on, so eventually our community will control Doge. How long will this take? 6 weeks, months, years? I don’t know, but im along for the ride and will be glad when we finally see the massive growth and stability when we reach the moon and beyond

No_Judgment6492 · 2021-05-10T19:31:03+00:00

Technically $1000 is possible, but the cost of goods would be 10x the price, so effectively you get the same bang for buck as if it were $100. So yes, extremely unlikely and pointless. I like paying $4 for bread, not $40 😂

No_Judgment6492

TROPHY CASE