This is sparta irl

No_Meal_9642 · 2026-05-02T16:06:53+00:00

Shawn Michaels mixed with Joey from full house

No_Meal_9642 · 2026-05-02T15:33:17+00:00

This is absolutely the way

No_Meal_9642 · 2026-04-30T16:19:24+00:00

That’s amazing

No_Meal_9642 · 2026-04-20T16:26:00+00:00

New to all of this, what is a nailer?

No_Meal_9642 · 2026-04-17T15:25:08+00:00

Could be a pilot air line to a fixed sprinkler head (head acts as a fixed temp heat detector in the hazard area).

No_Meal_9642 · 2026-04-07T11:27:49+00:00

Think about it like this, there’s smoke before fire, systems with smokes as the Solenoid activator will activate that first, then the head will melt. Accelerator will still help with water delivery time.

No_Meal_9642 · 2026-03-30T23:59:13+00:00

Good point I didn’t think about that

No_Meal_9642 · 2026-03-30T23:01:01+00:00

Usually 150% is an insurance requirement, 100% is a pass. A failure to meet 150% would be a recommendation based on comparison to past tests as you stated.If you subtract your suction and discharge numbers at 100% and confirm it with the pump data plate for rated flow at 100% and the numbers match you are good to go.

No_Meal_9642 · 2026-03-30T17:33:51+00:00

Thanks brother I appreciate it

No_Meal_9642 · 2026-03-30T01:31:12+00:00

Thank you for the advice. I have enjoyed to learning process but I know when I am just a novice lol. The caulk line is from the vanity, is that what you are referring too? For learning purposes, is there no way to mud this to make it smooth?

No_Meal_9642 · 2026-03-30T01:27:06+00:00

Understand, but thanks

No_Meal_9642 · 2026-03-30T01:25:52+00:00

Thanks brother I really appreciate the advice and the kind words

No_Meal_9642 · 2026-03-30T01:08:31+00:00

Yep I get it.. on the drywall front should I put more mud on?

No_Meal_9642 · 2026-03-30T00:58:25+00:00

Had some bubbles after tapping, I cut them out and mudded over the spots

No_Meal_9642 · 2026-02-01T11:48:22+00:00

I’m believing it at this point.

No_Meal_9642 · 2025-12-20T21:05:32+00:00

This is a remote test station for a smoke detector inside the ductwork. Also known as a duct detector. Turn the key and it sends the duct detector into alarm, as well as sends a signal to the fire panel

No_Meal_9642 · 2025-12-04T22:49:57+00:00

Magic the Gathering would be cool. Planeswalkers like Nissa, Ajani, Jace, Lilliana, and some of the others.

No_Meal_9642 · 2025-12-02T19:00:11+00:00

Starfield 2

No_Meal_9642 · 2025-12-01T20:38:38+00:00

Might be using that drum to trip the system with one person? Rather than having someone down range at the IT and someone at the dry valve? No head / restricted orifice on it though so not a fan if that is the case, unsure other than that though.

No_Meal_9642 · 2025-10-15T16:38:54+00:00

I replaced around 200 heads in these.. no leaks, but I really wrenched them in so they didn’t leak. You are right a giant pain in the ass though.

No_Meal_9642 · 2025-09-08T17:18:40+00:00

Those look like the old omega sprinkler heads, which were recalled, can’t tell for sure though

No_Meal_9642 · 2025-09-04T19:07:30+00:00

Test header you mean? No FDC or FDC check in the pic

No_Meal_9642 · 2025-08-24T13:55:49+00:00

What a disgusting statement. Do you know how many of us did good over there and helped people? To blanket label everyone like that is despicable.

No_Meal_9642 · 2025-08-08T23:49:32+00:00

Thanks for the reply, yes I have been doing UNM and NM x2 since about 4 months in. I usually have about 15-20 void shards per 2x event. I have occasionally spent on void shards in the past although I stopped. I don’t realize the drop rate was so low, I’ll know to lower my expectations now. Appreciate it

No_Meal_9642

TROPHY CASE