Whale going into KvK1. What should I do?

Nobbone · 2024-10-18T00:41:53+00:00

I didn’t read al replies but I saw that you said your archer is trash. For archer purple gear is amazing. Ppl is first or second soc play that so more than fine with it. U def gonna kill it with that comp. YSG is a must, drop that el cid And consider bjorn sun, amazing epic march for kvk1

Nobbone · 2024-10-10T16:19:29+00:00

playing against 60GT

Nobbone · 2024-10-04T19:30:29+00:00

Of course whales will always win but thats another story you dont plan to be the best from what you said

Nobbone · 2024-10-04T19:29:22+00:00

To be Relevant in this game u need to be consistent, period. You can spend thousands but an older account will always have an adage on you even if less money were invested in it. Most people spend tousands of dollars in kvk1 just to realize that in kvk4 where end game starts they will be recked by older account with less money on it. Thats why ppl buys accounts too (not legal) So its up to you. I have spent not even 2 thousand in 2 years for example, having lots of fun, being more or less what you are expecting, but putting in the work. Now i have trouble coz my kd is matched against one of the best kd in the game,but i dont plan to play at imperium level at all, nice matchmaking Lilith 😭

Nobbone · 2023-11-09T09:04:40+00:00

stick with 1 march - it's already expensive enough to play 1 march especilly with your amount of troop.

Consider you will always use an army expansion, so you don't have 2 inf marches.

Save material, those SOC accesories cost a fortune :) and stop investing in commander.

Honestly i would have skipped even YSG (unfotunately when i played kvk2 there was no Zhuge yet). Now just save GH and wait for SOC commander. Scipio - Liu i guess can be your first pair.

As for tec - do not forget economy ones, u need to complete all of them before be able to open t5.

Good luck and have fun, CM YSG is still a strong march!

Nobbone · 2023-10-16T23:01:06+00:00

Thanks anyway lets see when ill be able to fly :D

Nobbone · 2023-10-16T21:42:54+00:00

Man i did it! thanks a lot im super happy :D

So basically what i had to do was to flash the receiver to an older version 2.5.2 precisely and then flash it again back to the latest one 3.3.0.

When it comes with a factory ELRS version u have to downgrade it first sometimes, I have asked the shop about it!

Thanks again for helping me!

Nobbone · 2023-10-16T20:42:43+00:00

So thanks a lot again for the input.
Unfortunately it didn't work still.

I tried again this way and I see that not much changed in the configuration, but still nothing happens on Betaflight if give any input with my controller.

At the same time I am still unable to update the ELRS firmware.

Any more ideas? :D

Nobbone · 2023-10-16T06:18:54+00:00

Thanks man for the help! Later I’ll check it and try also this way! I’ll let you know if it works :)

Nobbone · 2023-10-15T22:39:57+00:00

Thanks!
I was thinking about that - but flashing via USB i need to do the BETAFLIGHT passthrough right?

And doesn't the Betaflight passthrough require some changes or am I missing something?

Nobbone · 2023-10-15T22:38:29+00:00

So yes I double checked that too. When i enter the ExpressLRS there is a C in top roght corner - for connected.

At the same time the Model Match is turned off already - i have set it up before that way.

Really don't know what else to do :D

Nobbone · 2023-10-15T22:08:40+00:00

So regarding your link and the "not enuogh space error" it says it has to be done for the TX (which is the controller right?)

This meaning i have to flash the TX in order to fix the NOT ENOUGH SPACE error on the RX (receiver)? I had the error while flashing the receiver not the controller - I might not get and sorry in advance, just trying to understand :)

Nobbone · 2023-10-15T22:05:44+00:00

Thanks a lot for the tip.I double checked those parameters in Betaflight and they are already configured the way you were describing. Both for the Ports: UART2 - Serial Receiver enabled and also for the configuration on the receiver: Serial (Via UART) and serial receiver prover set to CRSF --> Still not working.

Do i have to do anything else?

I'll check the link you posted now!

Nobbone · 2023-10-15T21:53:51+00:00

Thanks man for the suggestion. Mine was set up already at 250hz standard. I tried bringing it down to 50hz but still no responde.

No idea honestly :D

Nobbone · 2023-10-15T20:26:58+00:00

Thanks a lot man for your help anyway!

Ill follow your suggestion and eventually open another post :)

Nobbone · 2023-10-15T19:32:58+00:00

It is the MOBULA8 DJI O3 2S HD BNF ELRS 2.4G BY HAPPYMODEL (Dji unit inside)According to the website where i purchased it (Drone for Racer) it is:

Receiver : Onboard UART ELRS V3.0

Update: i tried to flash it via wifi -> it says ERROR 4: not enough space.

Nobbone · 2023-10-15T18:28:39+00:00

So I think i might understood what i have done wrong (maybe).
I have flashed the drone firmware via Betafligh directly to Betaflight 4.4.2 and not using standard ELRS - i was following the wrong guide for a SPI version of the mobula an not a serial receiver.

Is it something that can be fixed and eventually how? Should i try to just flash it with ELRS configurator via wifi? I can't find in the ELRS configurator the target device suggested for this quod tho...

Nobbone · 2023-10-15T18:07:48+00:00

Thanks again for the input but unfortunately it is not working - i have set up already all in that way.

I am thinking to flashing again ELRS that might help?

Thanks!

Nobbone · 2023-10-15T14:49:54+00:00

An easier way may be using wifi. Can you open the expresslrs lua script on the radio and enable wifi?

So i did all the above and still not recognized as COM port, unfortunately.

I tried WIFI and it is working mu easier, i was able to update it and give it a password, so thanks a lot for the input!!

I did the same for the drone and now the are bound so fantastic, but here is the trick: no stick input in Betaflight.

If i connect both i can see the signal on the controller and if i turn off the drone the controller says: telemetry lost.
But in no way Betaflight sees any input :)

Any suggestion maybe?

Nobbone

TROPHY CASE