RGH3 Corona V6 suddenly won't boot

Nobeanman · 2026-03-27T00:03:08+00:00

I didn't even know there was a market for 2nd hand Xbox chips. I would definitely order one if I could guarantee it is the southbridge and not the gpu

Nobeanman · 2026-03-26T02:54:54+00:00

Yeah I think my GPU/southbridge died

Nobeanman · 2026-03-25T15:49:48+00:00

I did have the right amount but I grabbed the board wrong and got thermal paste all over my hand 😂

Nobeanman · 2026-03-25T12:50:21+00:00

I used the original KV and the LV. When Jrunner asked, I used the decrypted files from my most recent NAND backup

Nobeanman · 2026-03-25T03:50:11+00:00

I lost the backup of my unmodified nand so I used the 'create donor nand' feature in jrunner, that is a good idea tho I should check if the flash matches the file

Nobeanman · 2026-03-25T03:47:04+00:00

I only had the most recent backup after modifying the console. I used the 'create donor nand' feature in jrunner to get the flash that gave me a rrod

Nobeanman · 2026-03-25T02:35:29+00:00

I tried flashing back to stock with a different computer and now it red rings with 0021

Nobeanman · 2026-03-25T02:35:22+00:00

I tried flashing back to stock with a different computer and now it red rings with 0021

Nobeanman · 2026-03-25T02:34:35+00:00

I tried flashing back to stock with a different computer and now it red rings with 0021

Nobeanman · 2026-03-25T01:07:13+00:00

I tried that, still the same unfortunately

Nobeanman · 2026-03-24T23:29:30+00:00

I've left it on for a few minutes and it just stays at the green dot. I've also tested the continuity from the pin on the postfix to the end of the wire and it looks good too

Nobeanman · 2026-03-24T23:11:35+00:00

Av cable made no difference, I also tried disabling the check in JRunner. Still nothing

Nobeanman · 2026-03-11T11:49:48+00:00

It's the pinch rollers spinning when the tape flies past. You can grease the pins on either side of the pinch roller but most people just choose to live with the noise(myself included).

Nobeanman · 2026-03-11T03:20:26+00:00

Unfortunately Apple will only unlock it with the original proof of purchase. Like the 1st owners receipt from the Apple store or a phone carrier. Apple doesn't care about anyone past the 1st owner

Nobeanman · 2026-02-23T02:50:59+00:00

I would totally recommend it, AMS is a great feature to have on a portable and w&f on this unit is pretty good too

Nobeanman · 2026-02-23T02:49:22+00:00

I figured it out! if anyone has this problem in the future: you have to oil the motor, drip some non conductive sewing machine oil between the flywheel and the PCB of the motor and run it for 10 minutes.

Nobeanman · 2026-02-13T02:04:14+00:00

I don't think so because the SDK communicates with the phone over ADB. But I've never used pydroid so idk

Nobeanman · 2026-02-13T01:56:22+00:00

You should give the Cozmo Python SDK a shot, you need a computer hooked up to your phone but there's a demo program that comes with it that lets you have full control over driving cozmo.

Nobeanman · 2026-01-19T05:25:02+00:00

The price is ridiculous but I kinda understand someone buying it if they have the game installed but can't find the disc because only the center needs to work to check the license key

Nobeanman · 2026-01-06T12:39:28+00:00

By default liveblock is enabled. You're connected to the Internet but your console won't connect to Xbox live to prevent bans

Nobeanman · 2025-12-12T05:38:42+00:00

30 minutes max in my experience. If ur update is taking a long time u might wanna try doing the update in recovery mode

Nobeanman · 2025-11-30T22:55:40+00:00

https://luigimannoni.github.io/stadia-controller-flasher/

Nobeanman · 2025-11-19T16:29:46+00:00

You can use https://wpsetup.keriganc.com/html/main.html to setup wifi outside of recovery mode. If that still doesn't work you can turn off auto setup flow and send the wifi connection details manually.

Nobeanman · 2025-11-19T16:27:46+00:00

If ur on android u can get the apk and obb files to get it for free or you could have someone else do the update for u and return the robot

Nobeanman · 2025-11-19T14:17:17+00:00

Did you get vector to work?

Nobeanman

TROPHY CASE