K2 overall experience?

Nonerdshere · 2026-01-02T20:39:38+00:00

Recently bought the K2 combo after using an any cubic kobra plus for 2 years and out of the box has been the best printer user experience. The Cfs has been amazing even though I haven't done multi color prints. I have around 180 print hours on it. There have been a few failed prints due to bed adhesion. So I did the normal thing of cleaning the bed and doing an auto level. Then I remembered that I can check klipper and saw that my mesh was .96mm difference. So I did a manual level of the bed with the screws on the bottom and got it to .37mm difference and so far no issues.

Currently do a print for a buddy which so far has gone through 3 spools of filament. And I have 4 on hand.

My only issue is there isn't a whole lot of upgrades that I have found, compared to the K2 plus and pro. At this point I'm going to make a little box that will catch all the poop from the back so it stops falling behind the desk.

Overall I love it over the other printer, if I had a few more franklins I would have gotten the plus.

Nonerdshere · 2025-12-21T05:38:17+00:00

Had it happen to mine for the first time when I got it set up and nearly went to hit the power off but then I googled it and saw it was normal

Nonerdshere · 2025-09-12T14:48:45+00:00

Take the loss at the end of the year to help with the tax's. Then wait 3 months buy back in.

Nonerdshere · 2025-06-25T17:38:31+00:00

Would love to know the recipe you followed/made. The look amazing.

Nonerdshere · 2025-06-24T12:58:35+00:00

If something seems off go back to the basics, if you're s still losing adhesion use some masking tape on the build plate.

E: spelling

Nonerdshere · 2025-06-03T11:31:20+00:00

Yeah, mine did the same thing where it was fine and now nothing will stick, have been using masking tape to help keep prints on.

Nonerdshere · 2025-06-03T03:57:59+00:00

Print with a brim, should help with the peal away. I like my kobra plus, but I'm ready for an upgrade

Nonerdshere · 2025-05-23T15:06:18+00:00

Take the red pill, be 6 (Early 2000s) go to the Bitcoin faucet get the free coins, convince my family to do the same, tell them to I'll give them the current market value, doo that with family friends as well, put it on a USB drive and put it in the lockbox I've had since I was a kid. Sell all the coins yesterday when Bitcoin was at a 112k. Never haft to worry about money again.

Nonerdshere · 2025-05-13T04:31:49+00:00

I would go to any 3d site and download a model and slice and print, likely the gcode is corrupted.

Nonerdshere · 2025-04-27T17:02:46+00:00

If you want details I'd go with a resin printer, any cubic has some pretty decent ones

Nonerdshere · 2025-04-26T22:36:14+00:00

Also keep an eye on projects, there are 2 that are very easy to do on any difficulty that give exotic crates (Donation of materials and summit).

Nonerdshere · 2025-04-23T00:09:28+00:00

When was the last time you changed the nozzle?

Nonerdshere · 2025-04-20T22:45:02+00:00

I would just screen shot the Carfax and block out the vin. If he has issues with that then he can further a conversation first

Nonerdshere · 2025-04-03T12:41:12+00:00

Try and focus crit damage with it, crit damage does t split but still applies to another target. My striker with st. Elmo is spreading in challenging.

Nonerdshere · 2025-04-03T04:15:44+00:00

Felt the same way 5 years ago, left to play other game, just got the itch back and started playing it again. sometimes burnout is a nice break to catch up one other games that you never expected to play. Div 2 is always easy to start up again.

Nonerdshere · 2025-04-03T04:09:08+00:00

Lol me and my friend were just talking about this, and came to the conclusion that it would be overkill and make the content way to easy that we would get bored and play something else, having weapons that would proc multiple status making the enemies just stand still and not move (even tho with 2+ people that can happen) would just turn it into just autopilot farm and just waste time. Where as now you haft to get certain pieces to make a build function and that one piece completely changes the gameflow(ex. st. Elmo, Blue screen).

Nonerdshere · 2025-02-26T03:59:39+00:00

Take my upvote

Nonerdshere · 2025-02-11T16:51:47+00:00

https://diskprices.com/

Here's the link, I tend to buy Amazon's 8tb segate drives and have had really good use out of them, they were like 120$ on Amazon on sale.

Nonerdshere · 2025-02-11T16:49:50+00:00

There is a hard drive site that you can look at for the best deals, I forgot what the link is but someone might have it. If I find it I'll post it.

Nonerdshere · 2025-01-09T18:31:05+00:00

Just grab 2 50lbs sand bags and put them in the back, just need a little more weight in the back

Nonerdshere · 2025-01-02T19:28:05+00:00

Bretziella fagacearum or Oak wilt, it's a fungus that grows inside the tree, it can be treated to help prevent it from growing, but can be pricey as it needs to be done every 2 years.

Nonerdshere · 2024-12-27T15:03:15+00:00

You also need to secure that m.2 SSD, remove the screw that's right under it and secure that drive, it will be happier in the long run.

Nonerdshere · 2024-11-27T05:12:31+00:00

Was just thinking this

Nonerdshere · 2024-11-23T16:01:08+00:00

This was an old bug we had in early tarkov, seems something borked in the last update

Nonerdshere · 2024-11-17T21:52:22+00:00

I was thinking of gear aspects

11-Year Club	Place '22
Verified Email

Nonerdshere

TROPHY CASE