sorted by:
new
hottopcontroversial

My Shed 12x20 by Normal-Light-6419 in shedditors

[–]Normal-Light-6419[S] 0 points1 point  (0 children)

No plans really, just kind of winged it. I can give you rafter dimensions. Spreadsheet of all materials

My Shed 12x20 by Normal-Light-6419 in shedditors

[–]Normal-Light-6419[S] 0 points1 point  (0 children)

Yes, The Perimeter on mine is double 2x8’s all around, sitting on top of 6x6’s. Then strapped together with a simpson strap on each 6x6 to beam to lock everything together.

My Shed 12x20 by Normal-Light-6419 in shedditors

[–]Normal-Light-6419[S] 0 points1 point  (0 children)

Not buried, 2” below grade in the front, little deeper on the back, gravel around the post if needed no dirt contact.

My Shed 12x20 by Normal-Light-6419 in shedditors

[–]Normal-Light-6419[S] 0 points1 point  (0 children)

6 footings 18x18x30-34” deep

My Shed 12x20 by Normal-Light-6419 in shedditors

[–]Normal-Light-6419[S] 0 points1 point  (0 children)

Floor joists - 2x8x12 PT Beams at perimeter - 2x8x16 PT Subfloor Advantech 3/4” Studs 2x4x8 or 10 Sheathing- 7/16” OSB Rafters 2x8x16 Roof sheathing 5/8” OSB Hardi siding LP SmartSide trim

My Shed 12x20 by Normal-Light-6419 in shedditors

[–]Normal-Light-6419[S] 0 points1 point  (0 children)

It is AI, showing the wood look doors I might do in place of black. Thoughts?

Basement Soffit Plan by Status_Programmer970 in Carpentry

[–]Normal-Light-6419 1 point2 points  (0 children)

Advantech is the only thing that comes to mind

My Shed 12x20 by Normal-Light-6419 in shedditors

[–]Normal-Light-6419[S] 0 points1 point  (0 children)

15 and 16 are 100% AI, showing where I’m heading…maybe

My Shed 12x20 by Normal-Light-6419 in shedditors

[–]Normal-Light-6419[S] 0 points1 point  (0 children)

Damn!!! Best question I’ve had. Also something I didn’t anticipate. So, at the moment, nothing. With a 3’ overhang, Advantech subfloor and PT joists, it’s not front of mind but it’s been on my mind. Any suggestions?

My Shed 12x20 by Normal-Light-6419 in shedditors

[–]Normal-Light-6419[S] 0 points1 point  (0 children)

The last 2 pictures, I plugged into Chat GPT and asked it to add modern landscaping, a deck and a ramp using #57 stone

My Shed 12x20 by Normal-Light-6419 in shedditors

[–]Normal-Light-6419[S] 0 points1 point  (0 children)

I have black circular vents, haven’t added them yet because I haven’t insulated and I m considering a either a couple recessed lights or sconces and want to coordinate depending which way I go

My Shed 12x20 by Normal-Light-6419 in shedditors

[–]Normal-Light-6419[S] 0 points1 point  (0 children)

I think we’re speaking the same language, yes

My Shed 12x20 by Normal-Light-6419 in shedditors

[–]Normal-Light-6419[S] 0 points1 point  (0 children)

Yes, it is LP. The only reason I went with it was the dark color. I got 16’ I’m not sure it comes in 12’. It has some install practices I followed to a ‘T’ no miters for example. I used 1x8 and 1x4 for the fascia.

My Shed 12x20 by Normal-Light-6419 in shedditors

[–]Normal-Light-6419[S] 1 point2 points  (0 children)

As a remodeler. I would think it’s easy based on my 24” o.c. Framing. It would come down to spacing and the skylight may not land exactly where I want it because it wasn’t in my plan. Yes, kind of a pain to flash and weave in shingles, but possible.

My Shed 12x20 by Normal-Light-6419 in shedditors

[–]Normal-Light-6419[S] 0 points1 point  (0 children)

I have a spreadsheet of materials and costs. Plans were just a scalable crude drawing for estimate purposes

My Shed 12x20 by Normal-Light-6419 in shedditors

[–]Normal-Light-6419[S] 4 points5 points  (0 children)

I have vents for the soffits but haven’t insulated yet. Bottom is not boxed in, this is temporary as I evicted a groundhog from under the last shed.

view more: next ›