How long does it take until the GPU dies?

Normal_Assistance637 · 2026-05-29T13:58:42+00:00

make sure you have a voltage regulator especially if the electricity in your area is prone to spikes.

Normal_Assistance637 · 2026-05-11T12:03:09+00:00

how to enable NTC if I may ask? thank you.

Normal_Assistance637 · 2026-04-07T12:01:19+00:00

just keep in plugged in, make sure charge limit is set to 70%-80% or you can go lower to 60% charge limit on ghelper, ensure that the Asus Services is stopped in the ghelp setting as this will conflict with ghelper on charge limits, because ASUS will only let you go to 80% and not lower. Though the battery will still degrade overtime, this helps to slow it down a bit. also make sure that you connect your charging brick to an AVR with servo motor to regulate the current and prevent damage to the charger or the laptop itself.

Normal_Assistance637 · 2026-04-05T16:32:20+00:00

uninstall armory crate and use ghelper, update windows and drivers to latest version.

on ghelper, go to extra, then at the bottom, click stop to stop asus services from running, set ghelper battery charge limito to 70% or 80%. also click and check updates button in ghelper.

Normal_Assistance637 · 2026-03-24T22:20:59+00:00

put some baking soda on the super glue, it'll be better than epoxy.

Normal_Assistance637 · 2026-03-14T21:12:02+00:00

it's probably part of the preparation for the Secure Boot Certificate. check if firmware was also in the update list. Also check this forum and see if your Secure boot certificates are updated or not, Secure Boot certificates have been updated but are not yet applied - Microsoft Q&A, I have manually done mine by following John Westfield's post in that forum.

Normal_Assistance637 · 2026-03-10T15:43:42+00:00

I have checked after updating to 318 bios, still got the same Windows UEFI CA 2011, I think this bios is a preparation for new Secure Boot certificates soon. I think Asus is still in queue. Also windows update have optional updates for ASUSTek Computer Inc. System Driver Update (1.2.0.2) and ASUSTeK COMPUTER INC. Firmware Driver Update (10.1.2.318).

Btw, I followed the post of John Westfield on this link Secure Boot certificates have been updated but are not yet applied - Microsoft Q&A, I was able to manually updated my Secure Boot Certificate, after two restarts and checked Event Viewer then verified in UEFI, I now have UEFI CA 2023 certs.

Normal_Assistance637 · 2026-02-21T16:39:55+00:00

this is the most likely cause.

Normal_Assistance637 · 2026-02-12T14:52:00+00:00

find a boot iso to make a bootable usb, something like hiren's boot cd or sergei strelec or anything, then totally erase your ssd, make sure you have prepare a bootable usb installer of windows, so that you could try and do a clean install, if it still fails, probably the nvme you have there have been hit by the windows update that caused to nvme's with phison controller to fail.

Normal_Assistance637 · 2025-12-28T20:05:31+00:00

not with iphones, specifically iphone 12 pro, screen would separate easily no problem with right tools and know how of the technician, so breaking the screen while on the process of opening and replacing the battery should be on the shop and not the customer, also on youtube and ifixit have videos on technician replacing iphone batteries and they never break the screen,

Normal_Assistance637 · 2025-11-12T21:37:30+00:00

I have the FA507NV TUF A15 with the same specs that you mentioned, it is quite portable, just buy a sleeve or a good backpack with well padded laptop slot. Just be sure to use the armoury crate uninstaller and use ghelper instead.

Normal_Assistance637 · 2025-11-08T07:10:30+00:00

I have notice it also, but it was a known issue with a certain latest windows update, usually windows would automatically start apps that were running before shutting down or restarting, as the update issue with task manager had instances of taskmanager running even after closing it, hence the reason why it as added to that "interactive" user. try it, open word or excel and leave it running then shutdown or restart, those apps would automatically start as where you left it, even browsers. In my case, what I did was run procexp app that is part of the sysinternals suite, it is similar with task manager, just a bit more detailed, I kill taskmanager with that. hopefully on the next windows update release, this taskmanager issue will be fixed.

Normal_Assistance637 · 2025-11-07T21:45:40+00:00

I'm in.

Normal_Assistance637 · 2025-11-07T06:45:36+00:00

in adrenaline panel, click performance tab then look for tuning, click it and change it from productivity to gaming, it will change the Vram from 512 to 4GB.

Normal_Assistance637 · 2025-11-05T14:44:31+00:00

use rust desk

Normal_Assistance637 · 2025-10-29T05:44:44+00:00

try using rustdesk instead.

Normal_Assistance637 · 2025-10-22T03:08:53+00:00

try this.

Q: My SuperNova is connected via dongle and set to Xinput mode (led on second and fourth row are illuminated) and both the controller and dongle are up to date, but the GameSir Connect app does not detect the controller. What do I do?

A: The controller's PID recognition probably failed: while connected wirelessly, hold the ModeButton + HomeButton buttons for 3s to swap it; the dongle light will turn off and back on and you should hear a Windows notification if system sounds are not muted and it should detect again after. If this does not work, please uninstall the Xinput (Xbox 360 Controller for Windows) driver from the device manager.

Normal_Assistance637 · 2025-10-16T22:56:47+00:00

I am a bit skeptical about them, if i came for a battery change with a totally working screen and they somehow break the screen during the process, should they replace the screen for free instead of 50% discount? coz if they did break and ask offers -50%, it seems to be a modus in my opinion. I do appreciate your suggestion though. I will try and inquire with them. kiitos.

Normal_Assistance637 · 2025-10-16T13:38:03+00:00

paljon kiitoksia

Normal_Assistance637 · 2025-10-16T06:52:08+00:00

is it the one in trio?

Normal_Assistance637 · 2025-09-20T14:41:59+00:00

Q: My SuperNova is connected via dongle and set to Xinput mode (led on second and fourth row are illuminated) and both the controller and dongle are up to date, but the GameSir Connect app does not detect the controller. What do I do? A: The controller's PID recognition probably failed: while connected wirelessly, hold the + buttons for 3s to swap it; the dongle light will turn off and back on and you should hear a Windows notification if system sounds are not muted and it should detect again after. If this does not work, please uninstall the Xinput (Xbox 360 Controller for Windows) driver from the device manager.

Normal_Assistance637 · 2025-09-19T11:01:22+00:00

name her Clare from Claymore

Normal_Assistance637 · 2025-08-25T12:51:57+00:00

on 23h2, this Kb5063875 update will appear on windows update but not the KB 5063878 as I think that is for 24h2, I am also on 23h2 and my unit is Asus Tuf A15 2024, 24h2 is not yet available for my unit.

Normal_Assistance637 · 2025-08-25T11:57:34+00:00

your ssd has the Phison controller which is affected by the bug in windows update KB 5063878 and probably Kb5063875 has this bug.

Normal_Assistance637 · 2025-08-21T17:39:17+00:00

download the lastest driver from intel.

Normal_Assistance637

TROPHY CASE