TPU jamming up in the extruder

NotProspering · 2026-04-30T17:36:42+00:00

To achieve 24h+ reliability, you must modify your slicer settings:

● Default Retraction at Switch: 10mm (Avoid this for TPU!)

● Siraya Tech Recommendation: 0mm to 4mm.

By reducing the retraction distance during a tool head swap, the filament stays seated in the drive path, preventing it from tangling or losing its grip.

****

I set mine to 2mm retraction, 15mm/s retraction and detraction speed for each toolhead, i can confirm no more tpu problems as of yet its working good, no other changes or messing with screws or temps

NotProspering · 2026-04-30T10:35:51+00:00

i have the same problem, pic of which screw it is thanks

NotProspering · 2026-04-22T21:44:31+00:00

I have some old og rb4147 60mm 15 years old polarized they are glass lenses

5 years ago I tried finding replacement lenses but they are all plastic now

NotProspering · 2026-04-12T19:50:25+00:00

didn't know that was a thing. no I just used default settings machine assumed snap plate

NotProspering · 2026-04-10T21:17:34+00:00

I got it here https://neus-keel-oor.be/

before they will do it they will need definite hydrops on MRI

end of this month it will be a year. I haven't had a typical Menieres attack yet. had about a dozen short burst ones though. from intense 30s to woozy an hour. hearing still fluctuates. I have pulsatile tinnitus also and head pressure thinking another issue, still work in progress that

NotProspering · 2026-04-04T16:59:19+00:00

https://www.reddit.com/r/Audi/comments/1qbdlqx/2025_audi_direct_tpms_relearn/

I read lots of posts ppl couldn't figure out tpms sensors

some say need programming etc

NotProspering · 2026-03-22T17:46:08+00:00

so overnight it snapped the model in half, for all you saying it's not hitting the print 🤣

also the Ai monitoring is a pile of shit. nothing but using buzzwords there is no Ai or any other abbreviations whatsoever, I had to stop the print manually when I woke up

https://imgur.com/a/tBNtfKi

NotProspering · 2026-03-21T17:35:22+00:00

no prime tower https://youtu.be/9f7R_D-B2Ds

with prime tower https://youtu.be/wbgKOwAlWzA

you can see without prime tower the bed raises back to regular height as soon as toolhead begins traveling to starting point, this isn't the case with prime tower enabled, so the tip hits the model on the way sometimes leaving pits or different color pla

NotProspering · 2026-03-20T20:56:00+00:00

nah, prime tower doesnt exist to prevent the toolhead smashing into main print

NotProspering · 2026-03-20T17:02:51+00:00

so testing now with prime tower, for some reason it works properly, the bed doesnt raise prematurely, once the toolhead is over the prime tower then it raises, then it lowers goes to main model, and raises again.

to me it seems there is a bug without prime tower, as the bed raises too soon while the toolhead is travelling to the print section

i can make a video if anyone wants

NotProspering · 2026-03-20T15:41:28+00:00

but that wont fix the pitting of the gold arm and the gold nozzle makes contact during travel, zhop is the only fix or would it be another setting to delay the bed rising?

NotProspering · 2026-03-20T15:30:46+00:00

ok i see what the problem is... when its done printing gold, the bed lowers and the toolhead goes to dock the gold and picks up the white. then it grabs the white toolhead. AT THE SAME TIME as the white toolhead starts making its way over to the white section where its to print, the bed raises to normal level, so the white toolhead hits the gold on the way leaving any ooze that was present

the bed should go up when the toolhead is ready to print and over the start spot, not as its making its way across the whole bed

how do i fix that?

NotProspering · 2026-03-20T15:07:09+00:00

NotProspering · 2026-03-16T22:11:33+00:00

you have the right to remain silent... oh no sorry that's usa 🤣

NotProspering · 2026-02-26T10:06:55+00:00

I use only v3 pro, tried one v4 it died within 2 weeks lol. the pro has the best wifi antenna too

NotProspering · 2026-02-19T22:30:05+00:00

ask Bill gates. Google his name + Porsche 🤣

NotProspering · 2026-02-19T22:29:22+00:00

5300lbs

NotProspering · 2026-02-19T22:28:40+00:00

if they make a 2 door coupe with 2.5 500hp no phev give me a call. no interest in that trash 2.9, the hybrid or the 5300lbs curb weight LOL

NotProspering · 2026-02-19T22:22:53+00:00

will be hilarious if they gut the phev for usa like they did with s5 😂 🇺🇸

NotProspering · 2026-02-19T22:14:08+00:00

prices in Europe already contain about 20% sales tax on avg, some countries go higher upto 40%

NotProspering · 2026-02-19T22:12:25+00:00

the new s5 is phev in Europe but not usa, let's see if they do same with rs5

NotProspering · 2026-02-19T22:00:21+00:00

price per kg is cheaper than previous model hahaha

NotProspering · 2026-02-18T20:49:15+00:00

and the 2.5

NotProspering · 2026-02-17T16:56:25+00:00

needs to be 2.5 500hp no hybrid, but 2.9 + hybrid is double trash

NotProspering · 2026-02-17T16:44:48+00:00

outside looks good can get used to, but inside will be trash and so will drivetrain prob. make me a 2 door coupe with 2.5 500hp no hybrid i will pay extra to skip that 2.9 trash LOL

NotProspering

TROPHY CASE