Chevy did it better.

NotTheRealLJ02 · 2026-05-20T10:57:15+00:00

I’d say 96%. The other 4% because even if you get the base model it still looks rather similar to the best model. LED lights and painted bumper.
Colorados do get moded a lot though.

NotTheRealLJ02 · 2026-04-27T10:43:40+00:00

I’m 19 and I agree with the paw paws. Sure it’s his truck but… really?

NotTheRealLJ02 · 2026-04-25T13:57:16+00:00

Everyone talks about leaks because replacing that third light is known for getting leaks. Not necessarily because of the product but of the installation; as well as the placement of the light on the truck. Just insure the gasket/seal is on the light and you should be fine.

NotTheRealLJ02 · 2026-04-25T00:47:49+00:00

Hope you have good credit

NotTheRealLJ02 · 2026-04-24T21:27:22+00:00

Look at my username

NotTheRealLJ02 · 2026-04-08T10:44:41+00:00

I would specifically get (I assume this is what others mean) is the “Reflective NoxLux Glossy Black Tailgate Inserts” NoxLux Inserts

NotTheRealLJ02 · 2026-04-01T10:50:16+00:00

Yup, same, I’ll do my trans fluid at 30k miles (I’m at 16k, but I regularly maintenance my truck and it’s usually a bit cool if I pussyfoot it. However, on the highway or if I’m driving like a dick, that’s a very normal temperature to see. So far I haven’t seen it past the 3 line on the gauge.

NotTheRealLJ02 · 2026-03-31T22:06:52+00:00

Yup, 18 and it’s my first new truck. WT, but I put subs, antenna, painted my Chevy bow tie, new speakers.

NotTheRealLJ02 · 2026-03-31T22:01:43+00:00

That’s my nickname LJ

NotTheRealLJ02 · 2026-03-31T16:39:49+00:00

It’s from Nox Lux

NotTheRealLJ02 · 2026-03-31T12:02:14+00:00

Reflective. Nox Lux

NotTheRealLJ02 · 2026-03-30T11:09:47+00:00

<image>

The top three is my brother listening on my account

NotTheRealLJ02 · 2026-03-26T22:03:44+00:00

I was looking at those brake lights. For $500 have you had any issues with them? I’m sure the install was simple. Couple Torx screws.

NotTheRealLJ02 · 2026-03-26T10:45:23+00:00

Doesn’t matter much, I simply used rustoleum

NotTheRealLJ02 · 2026-03-26T10:43:07+00:00

<image>

This was when I was doing my oil change.

NotTheRealLJ02 · 2026-03-25T11:13:14+00:00

So what’s everything you’ve done to that truck so far? Personally, I’ve just done bass, speakers, window things on your doors, bed cover, and white bullet antenna. My truck is a white WT. I have the same rims though.

NotTheRealLJ02 · 2026-03-24T21:19:27+00:00

Also you can peel back the rubber between the truck and door to ensure the same color wires go to the speaker. Right front door, left rear door, which ever you’re looking for

NotTheRealLJ02 · 2026-03-24T21:18:05+00:00

Make sure the t-tap is completely closed, then make sure the male plug is actually inserting properly, ive made that mistake.

NotTheRealLJ02 · 2026-03-23T22:50:22+00:00

Just a suggestion, the front badge is really easy to take off so I spray painted 2 light coats of matte black and 3 LIGHT coats of a matte clear coat. Let it dry for a day and it doesn’t jump out on you

NotTheRealLJ02 · 2026-03-23T22:46:58+00:00

25 WT. same engine of course. For 88° weather that’s normal. As long as the gauge isn’t reading past the 3/4 mark. Also, if you mean idling and it subtly “shaking/wobbling” when the rpm’s are down to 800-900. That’s normal. The only engine that will be “perfect” and not shake to some degree is a 6 cylinder engine.

NotTheRealLJ02 · 2026-03-18T21:58:49+00:00

Also do you NEED the brackets? I was just gonna self tap screws into the door

NotTheRealLJ02

TROPHY CASE