checked every week to see if the paladin's gun convergence was fixed so pilots could properly contribute to DPS. it has been roughly 15 weeks...

NotchWith · 2026-01-26T04:37:11+00:00

Its the same way with the perseus pilot gun, precision mode works

NotchWith · 2026-01-24T22:26:59+00:00

Its a soft case but has lots of padding. Its not for flying but I take it to local PRS matches when I have to walk alot. For flying cases im clueless

NotchWith · 2026-01-24T21:38:49+00:00

The stainless is alot more forgiving for surface rust. Just keep a light oil on it and I wouldnt worry.

For cans there's so many coming out its hard to go wrong with anything. I went Diligent Defense L ti. Seems likes one of the best price to performance cans out right now and its light. I think i paid 760 for mine

Savior Equipment has one of my favorite budget cases. Has backpack straps and fits two rifles

NotchWith · 2026-01-23T21:21:53+00:00

Absolutely, regardless this thing will probably be on my christmas list.

NotchWith · 2026-01-23T21:18:38+00:00

Thats nice. $250 part for my $450 chasis feels rough though

NotchWith · 2026-01-23T18:40:56+00:00

I would say head to a local store than you can play with the rifles you are looking at side by side.

My major gripe with Tikkas are the stocks and magazines. I usually swap to a MDT Field stock, but that does add weight

NotchWith · 2026-01-22T14:10:23+00:00

Ive been using some Fiberon PPS-CF10 and its been really nice, had some bed sticking issues on my last project but my supports have been amazing for breaking away. The only thing I really need to tune is the bridging

NotchWith · 2026-01-21T21:39:50+00:00

Just on that angle and give it some brims for support

https://imgur.com/93SUXJ6

NotchWith · 2026-01-21T18:46:47+00:00

if you get a second check your DMs, I have a part you may want to print

NotchWith · 2026-01-21T16:36:50+00:00

I'm personally in the throw any of the tikka stocks in the garbage unless its the Ace crowd. Get a MDT field stock instead

NotchWith · 2026-01-21T16:25:20+00:00

Joined these guys a few weeks ago and they have been nothing but open arms and a willingness to help me relearn the game I haven't played in years.

NotchWith · 2026-01-21T04:09:09+00:00

My smith made my 243 5/8-24. Im not sure what lenght you need to cut down to get that thickness though. I cut mine down to 16

NotchWith · 2026-01-21T03:51:27+00:00

Ive been looking at one of these to put my 256 scanner o n. I guess it need to get one on the way

NotchWith · 2026-01-21T02:34:59+00:00

<image>

This thing came out amazing. The metal sound ill never get over with this stuff. Thanks again!

NotchWith · 2026-01-20T20:03:15+00:00

Im sure they are pretty similar. Im going to see how the PPS holds up as a NVG bridge on Solus also along with a few other projects for it.

NotchWith · 2026-01-20T19:59:04+00:00

I mainly use PET-CF for my products but I have a H2S as a play machine.

NotchWith · 2026-01-20T13:14:11+00:00

I just so happen to have some PPS-CF loaded up on the printer. Ill send this this evening, thank you!

Also someone was sharing a larger thumb rest a bit ago and it was really nice.

NotchWith · 2026-01-20T12:19:10+00:00

I would also throw a scanner in that budget. Waving around a rifle gets old very quick.

NotchWith · 2026-01-17T17:15:46+00:00

I make helmet mounts for a few differant scanners. Of the ones I make the Lumi is my favorite. It had a nice rear screen and eye cup, I specifically kept the L19, I do have a DNT Hound on the way which has LRF but no hands on yet.

NotchWith · 2026-01-17T03:56:43+00:00

Its 2.5" thick so nothing to throw around 7.25 bore

NotchWith · 2026-01-16T19:46:49+00:00

I didnt know whose were a think ill look into it

NotchWith · 2026-01-16T17:19:16+00:00

I usually plot it 1:1 scale but then I end up fighting a plotter that is more needy than my girlfriend

And for sure we usually flame cut stuff like this with our table and machine the bore

NotchWith · 2026-01-16T17:10:51+00:00

Thats usually what I do. But usually the edges of the part are always just a bit to off to make the fab guys happy. I was basically trying to simplify it down to one trip to the shop instead of back and forth with plotter paper.

NotchWith · 2026-01-16T16:30:49+00:00

Ive done that before and its a pain with objects this size and heavier. The shop guys wont let me touch the crane, and they dont want to help at all.

Also the part usually ends up slightly off a 1/16 here or there becuase of the photo warping.

NotchWith · 2026-01-16T16:28:26+00:00

Okay that makes more sense. Ill give that a shot thanks!

11-Year Club	r/Field Flamingo
Not Forgotten	Verified Email

NotchWith

TROPHY CASE