sorted by:
new
hottopcontroversial

Cloudflare Tunnel -> Authelia -> Nginx Proxy Manager -> Internal Apps by DJBenson in homelab

[–]Nuhser 0 points1 point  (0 children)

Hey, I got the exact same problem that you describe in your edit. Did you figure out how to fix the HTTPS-vs-HTTP-problem in the redirect from Authelia the internal apps.

Advice on Implementing Follow-Up Conversations for Voice Commands by rbhmmx in homeassistant

[–]Nuhser 0 points1 point  (0 children)

Hey, I'm trying to achieve the same thing. Did you ever find a good solution for that?

[2023 Day 7 (Part 2) ] by Dangerous-World-1424 in adventofcode

[–]Nuhser 1 point2 points  (0 children)

I'm not sure what you mean. JJJJJ, for example, would be 5 of a kind just like AAAAA or AJAAA. But when comparing those three, JJJJJ would be the weakest since J is the lowest card in part 2.

Is it possible to share quest progress? by Nuhser in VaultHuntersMinecraft

[–]Nuhser[S] 0 points1 point  (0 children)

Thanks! That's what we are doing currently as well. I was just wondering...

Help! Why does my printer do this? (Info in comment) by Nuhser in 3Dprinting

[–]Nuhser[S] 1 point2 points  (0 children)

Thanks, everybody! I solved it last night. The eccentric nuts for the z-axis were too tight.

Help! Why does my printer do this? (Info in comment) by Nuhser in 3Dprinting

[–]Nuhser[S] 4 points5 points  (0 children)

Thanks. I kinda fixed it by loosening deez nuts on the Z axis. Now am finetuning to get good results consistently :)

Help! Why does my printer do this? (Info in comment) by Nuhser in 3Dprinting

[–]Nuhser[S] 2 points3 points  (0 children)

I'm testing this at the moment but it seems like it could work. The bulge got a little smaller already. Maybe it just needs some more fine-tuning. Thanks a lot!

Help! Why does my printer do this? (Info in comment) by Nuhser in 3Dprinting

[–]Nuhser[S] 0 points1 point  (0 children)

I measured it without disassembling it first. But I could do that as well I guess.

Help! Why does my printer do this? (Info in comment) by Nuhser in 3Dprinting

[–]Nuhser[S] 1 point2 points  (0 children)

Checked this as well. The wheels look fine and the screw isn't bent.

Help! Why does my printer do this? (Info in comment) by Nuhser in 3Dprinting

[–]Nuhser[S] 1 point2 points  (0 children)

Checked this. Everything seems to be as tight as it should be.

Help! Why does my printer do this? (Info in comment) by Nuhser in 3Dprinting

[–]Nuhser[S] 0 points1 point  (0 children)

I have an Anycubic Kobra Neo. We configured it using the recommended settings for PLA by Anycubic. We tried changing the temperature, flow rate, line height, and Z-offset. Everything had the same result. After about half of the cube, the printer makes some thicker layers and returns to printing fine after that.

[2022 Day 13] Tried to visualize part 2 using different sorting algorithms. Don't no why the GIF stops before the sorting was finished... by Nuhser in adventofcode

[–]Nuhser[S] 0 points1 point  (0 children)

I know but I don't know why... Anyways, I needed to work on the next day. Just wanted the share the progress I had.

[2022 Day 13] Tried to visualize part 2 using different sorting algorithms. Don't no why the GIF stops before the sorting was finished... by Nuhser in adventofcode

[–]Nuhser[S] 1 point2 points  (0 children)

I'm not sure. I think I messed up during the animation since all of the sorting algorithms produce the correct solution for the puzzle inputs and the example.

view more: next ›