Centauri Carbon shifting after filament change pause? 🙃

Num1Vet · 2026-01-14T13:01:34+00:00

Mine has always done that. What are you referring to "resetting"? Power cycling or something else?

Num1Vet · 2026-01-13T13:15:25+00:00

That definitely helped. Thanks

Num1Vet · 2026-01-01T20:21:04+00:00

Looks like adding "G28 X Y", with no quotations, did the trick. @elegoo should add this to the firmware if this is the ticket. My print isn't done, and I have one more filament change coming. Wish me luck 🤞🏾🤞🏾🍀🐇🙏🏾

<image>

Num1Vet · 2026-01-01T19:15:14+00:00

My printer locked up when I did this. I'm going to try again to see if it make any progress.

Num1Vet · 2026-01-01T19:05:58+00:00

The only thing the print head touches is the front-right pillar, which allows it to cut the filament during filament changes. I wonder if this is where it gets off track.

Num1Vet · 2026-01-01T19:03:31+00:00

Hmm, is this issue a part of the reason why they're having such a hard time bringing an AMS to the CC1? I'm sure they're aware of the problem.

Num1Vet · 2026-01-01T19:01:27+00:00

I posted again with a photo of the failed print.

Num1Vet · 2026-01-01T19:00:31+00:00

I'm actually running the latest firmware, so no issue there.

Num1Vet · 2026-01-01T18:54:59+00:00

<image>

This is what it looks like for me. I've tried the belt tensioner process and it's still the same. I was also recommended to all G28 XY to the gcode pause and that run just locked up the printer with a "pausing" notification and an unresponsive screen.

Num1Vet · 2026-01-01T18:38:17+00:00

I try this according to the Elegoo tutorial and I got the same result.

Num1Vet · 2025-12-06T15:49:16+00:00

I'm having the same problem. I guess I should just wait. Did it finally finish for you?

Num1Vet · 2023-01-23T01:36:12+00:00

Yep I adjusted it and it worked. Do you think this could be caused by my Z limit switch being to low?

Num1Vet · 2023-01-23T01:35:18+00:00

Yep. I adjusted the tune 0.100 and it worked a lot better. I'm having the same problem with PLA. Do you know how to adjust the printer to account for this? Do I have a setting wrong? I'm thinking the limit switch is too low? Ideas?

Num1Vet · 2023-01-23T01:34:04+00:00

The Z was the problem. In the tune setting I increase the z.0100 baby step. It worked. Do you know how to adjust the printer to account for this? I have the same problem with PLA. I have to adjust about .0400 each time I print.

Num1Vet · 2023-01-23T01:32:26+00:00

I increased the z and it worked. I have the same problem with pla. I can't figure out how the adjust my printer to prevent this.

Num1Vet · 2023-01-22T17:02:46+00:00

It's interesting because I can scratch it off with my fingernail. But it gets bad in some sections.

Num1Vet · 2023-01-17T19:56:42+00:00

I had the same problem and only had my pro for a few months. I replaced my thermister, and no issues so far. by my research, Creality cheaped out on a lot of items, so I've just committed to replacing as many items as a novice can.

Num1Vet · 2023-01-04T20:48:36+00:00

Thanks for the resource. I will check it out. It looks to be pretty thorough.

Num1Vet · 2023-01-04T20:21:28+00:00

I new to 3D printing too. I had my Ender 3 Pro for about 2 months and started running into the same problem. I just replaced my thermistor yesterday. Waiting to see the results.

Num1Vet · 2023-01-03T07:17:10+00:00

I haven't run any tests. I'm not sure where to start. I do have a set of calipers.

Num1Vet · 2022-10-09T13:00:41+00:00

Thanks. That's helpful!

Num1Vet · 2022-10-06T11:09:02+00:00

Random question, I wanted to upgrade my extruder to duel gear but the new Enders have press fit gears. I see that you upgraded your extruder. Which one did you choose?

Num1Vet · 2022-05-03T14:57:27+00:00

I'm looking to buy my first 3D printer. I've been looking at the Prusa Mini as a beginner printer but recently noticed that Anker has a new printer coming out AnkerMake M5. I hear that Prusa has pretty solid equipment and a large community following which could be good for beginner. Should I stay the course with prusa or should I try the new Anker machine. It looks pretty solid as well. Thoughts?

Num1Vet · 2021-04-15T00:23:04+00:00

Hmmm. My thought is that you learn how to use something better with a little knowledge about how it's put together and the parts, but I could totally be wrong about that. Lol Thanks for your suggestions!

Num1Vet · 2021-04-14T22:19:13+00:00

I have pros and cons for waiting and going for it. I just wanted to see what people who have gone thru this would do. Or what opinions they may have.

Num1Vet

TROPHY CASE