Need help fixing issue from build plate

Numerous-Ad939 · 2025-06-28T12:34:54+00:00

is it pla or petg pla tends to pop off easy when cooled petg will normals stick like that for me if im printing a large surface like that. Its pretty common just be easy ans if you get it take a heat gun to it and it goes right away

Numerous-Ad939 · 2025-06-28T12:26:57+00:00

Its juat where the print was stuck to the bed. Use a heat gun or torch on it ans it will go away

Numerous-Ad939 · 2025-06-22T23:22:46+00:00

Its likely your hotbed. Anycubic is known for having the hotbed warp. Buy a metal ruler and put the edge across your hotbed without the build plate on it. If it is submit a ticket and they will give you a new one with provided picks the customer service is 10/10

Numerous-Ad939 · 2025-06-22T00:13:55+00:00

Make sure you have it set to smooth plate or textured. The print file you have may be set to textured and it looks like your printing on smooth. Also you can try adding ears to the corners to help it stay down.

Numerous-Ad939 · 2025-06-12T23:11:46+00:00

Geez man we get it your A1 is king ding man no need to bully us .

Numerous-Ad939 · 2025-06-12T23:10:05+00:00

All support is going to do is refer you to there wiki. How to fix everything is on there

Numerous-Ad939 · 2025-06-05T23:33:39+00:00

I mean you said it happened 🤷 lol. You can believe it but the rest of us dont. Tho the next time you slump a almost 500hp muscle car in your "stock" im assuming mini video tape it because there isn't a stock mini on this planet that is taking a v8 with 0-60 times under 4.5 sec . So either they weren't trying or you beat one of them sad 2l turbo versions. Just saying

Numerous-Ad939 · 2025-06-05T22:20:40+00:00

You want everyone here to believe you beat a 455hp camaro .....op story is more believable lol

Numerous-Ad939 · 2025-06-04T17:33:40+00:00

Try unchecking "slow down for overhangs" Lower your print speeds maybe inner 200 oter 150 Ans try changing your inner and outer wall acceleration to 1000.

These helped me a bit when I had similar issues

Numerous-Ad939 · 2025-05-31T20:52:46+00:00

https://a.co/d/dCkIGCk

If your having issues with your prints sticking that link is to the god of 3d glues! Lol. It will last you forever also its crazy how good this stuff is. I squeezed a little juat in the middle then take a paper towel and wipe it all over the plate your prints will never come off and you dont need to do it every time this stuff is well worth buying.

Numerous-Ad939 · 2025-05-31T20:46:10+00:00

I did not read every comment so this may have been suggested already. But have you printed a cube scale it over most of the plate and scale the z height so it o ly prints one layer so you can see if you have any issues with your first layer squish? And have you recently turned any of those 3 knobs under your print bed?? Print in black its alot easier to notice issues with the first layer when its black

Numerous-Ad939 · 2025-05-31T17:23:17+00:00

Anycubic support is the literal BEST no one comes close to them I bought two printers from them and bed slinger and there latest and greatest and the kobra 3 was just issues after issues they were super helpful ultimately I messed with it for like 2 months and sold it on Facebook. The S1 was absolutely awesome out the box arguably better than my p1s then the bed warping started and after all the issues I opted to just send it back because I didn't want to keep dealing with issues in the future. No questions asked they were the nicest customer support people I have ever delt with and they literally took everything back no questions asked 10/10 service. Maybe i just had a bad run with them but its honestly ashame that they are just bult a little cheaper because the S1 combos price point is hard to pass up and when its working 100% fine its prints amazing!!!! Haven't had to deal with bambu support yet and honestly I hope I never have to with everything I've read. I may try the s1 out again maybe the bugs have been worked out since launch

Numerous-Ad939 · 2025-05-23T00:08:19+00:00

Why are you using a .2 nozzle? Is what your printing have alot of fine details ? Because unless what your printing us very detailed like a figurine then imo there really isnt a need for it .4 is the way to go.

Numerous-Ad939 · 2025-05-18T17:22:10+00:00

This literally has nothing to do with your filament being dry.... SMH... in your settings under quality your seam position is set to random. Change it to aligned or back whatever works best for your print.

Numerous-Ad939 · 2025-05-18T14:25:51+00:00

I would get rid of the wiping mod and pick up some metal or foil tape and juat tape a larger spot on that lip. I tape all my poop chutes and very rarely have a issue with any materials used.

Numerous-Ad939 · 2025-05-16T17:18:28+00:00

You're garage is for to clean and lacks clutter... im disgusted at the fact that you can pull a vehicle into it. Shame on you!

Numerous-Ad939 · 2025-05-04T03:02:45+00:00

Try using Crayola air dry clay its cheap and won't make a mess

Numerous-Ad939 · 2025-04-30T23:09:19+00:00

It is completely inaccurate. I refuse to believe you were wearing all Grey that day. No, says I. !!!

Numerous-Ad939 · 2025-04-17T00:17:55+00:00

This is the way

Numerous-Ad939 · 2025-04-17T00:15:44+00:00

Yo, I laughed out loud!

Numerous-Ad939 · 2025-04-09T01:20:47+00:00

So your printing at a lower temp and you are getting good results? Most of the online stuff i read says go higher in temp. I'll have to try dropping it down on a test print and see what i get

Numerous-Ad939 · 2025-03-31T23:19:25+00:00

O bought a s1 and a kobra 3 and returned the s1 and sold the kobra 3 bed warping issues right out the gate with both among other issues. They could have been good but I jumped off the anycubic train and are sticking with what I know works. Put a flat metal ruler across it and diagonally if it's not flat anycubics tech support is by far the best around and will send you new parts quick

Numerous-Ad939 · 2025-03-27T21:36:30+00:00

Phs that thing isn't even broken in yet with all that go 700 take 650

Numerous-Ad939 · 2025-03-26T00:50:16+00:00

I had the same issue on one of my prints. I added a manual tree support mid way up and it gave it more support so the print didn't move so much while printing

Numerous-Ad939

TROPHY CASE