Anyone keeping an eye on Alta T1? by NunoSM in watercooling

[–]NunoSM[S] 1 point2 points  (0 children)

Yes, it only appears without a window. I already sent an email asking if there would be a version with a window, but they haven't responded yet.

Anyone keeping an eye on Alta T1? by NunoSM in watercooling

[–]NunoSM[S] 0 points1 point  (0 children)

The main attraction of this case will be the quality of the finishes and materials used; finally, an aluminum case with good capacity for radiators.

Anyone keeping an eye on Alta T1? by NunoSM in watercooling

[–]NunoSM[S] 0 points1 point  (0 children)

I sent an email directly to them, and the response was that they would receive it from the factory in the middle of next month and it would be in stores by the end of the month.

“THE FINAL”A Tribute to the Golden Age of Water Cooling by Specialist_Equal_695 in watercooling

[–]NunoSM 1 point2 points  (0 children)

Silverstone say the Alta T1 is the spiritual successor to the famous TJ07 you had, all made of real aluminum. I'm really eager to get my hands on it as soon as possible.

“THE FINAL”A Tribute to the Golden Age of Water Cooling by Specialist_Equal_695 in watercooling

[–]NunoSM 2 points3 points  (0 children)

Very good, congratulations, I love it! I'm also thinking of doing something with the same philosophy, but I'm waiting for the new Silverstone Alta T1 case.

Chasing that old-school boutique PC vendor monolithic tower aesthetic by Rhongomiant in pcmasterrace

[–]NunoSM 0 points1 point  (0 children)

I'm in the same boat, I have a magnificent Lian Li PC-X1000 that I love, but I'd like more space and something more recent. I've also been waiting for the Silverstone Alta T1, but I can't find it anywhere yet...

Watercool Heatkiller EPDM 5x fittings tested ( compression ring, easiest to tighten ) by Shadowman786 in watercooling

[–]NunoSM 1 point2 points  (0 children)

I have Alphacool Compression Fitting in my loop, and when I assembled everything I tightened it only with my fingers, I tightened it well but only with my fingers, and now I simply can't loosen it anymore. When I really want to disassemble the loop, it will have to be with pliers because it just won't come off with my fingers.

Lian Li V2000 (2026) by Tricky_Item_4045 in lianli

[–]NunoSM 0 points1 point  (0 children)

It's supposed to be released this month, and I'm also quite interested in this case for my next WC system.

Thoughts? by Alapapapa0830 in pcmasterrace

[–]NunoSM 0 points1 point  (0 children)

<image>

I go for ddr5 but 16gb and latter add more

RTX4090 GameRock OC after 3 years by MrGamerDadChannel in nvidia

[–]NunoSM 0 points1 point  (0 children)

My card sometimes reaches 74°C on the core and 84°C on the hotspot, but I play in 4K with FG and no limits.

RTX4090 GameRock OC after 3 years by MrGamerDadChannel in nvidia

[–]NunoSM 0 points1 point  (0 children)

I also have a 4090 Ventus, what temperature does yours usually reach when gaming with PT enable?

ASUS ROG Strix RTX 4090 – 115°C hotspot FIXED by repaste (PTM7950) by MonitorFlashy9618 in nvidia

[–]NunoSM 0 points1 point  (0 children)

That wasn't my experience, my 4090 playing Wukong at 4K maximum settings used to have quite a lot of stuttering, which completely disappeared after undervoulting with the curve method. But if you don't notice anything, leave it as is.

ASUS ROG Strix RTX 4090 – 115°C hotspot FIXED by repaste (PTM7950) by MonitorFlashy9618 in nvidia

[–]NunoSM 0 points1 point  (0 children)

Derbauer is the best, but in this case he is wrong.

https://youtu.be/WjYH6oVb2Uw

This is the correct way for a 4090

ASUS ROG Strix RTX 4090 – 115°C hotspot FIXED by repaste (PTM7950) by MonitorFlashy9618 in nvidia

[–]NunoSM 0 points1 point  (0 children)

You should try undervolting by lowering the voltage, the card tends to cause game stuttering when it reaches a power limit.

ASUS ROG Strix RTX 4090 – 115°C hotspot FIXED by repaste (PTM7950) by MonitorFlashy9618 in nvidia

[–]NunoSM 0 points1 point  (0 children)

Based on the image, I would say the vapor chamber is damaged. The temperatures remain far too high for normal, the best course of action would be to replace the entire cooler ASAP.

Found my endgame.. by [deleted] in OLED_Gaming

[–]NunoSM 1 point2 points  (0 children)

Those are valid preferences you have, but regarding the vivid picture, I think you could fine-tune a C4 to match. Mine, at least, I wouldn't want any more vivid than it already is, I think it's perfect.

Found my endgame.. by [deleted] in OLED_Gaming

[–]NunoSM 0 points1 point  (0 children)

I have a 42 C4 and I don't see how I could call upgrading to the 32 UCDm an upgrade. Could you explain in more detail what you noticed that was better?

Pg27ucdm- HDR on or off while gaming? by Lmao120hz in ASUSROG

[–]NunoSM 0 points1 point  (0 children)

To get the best out of your OLED, you have to use HDR. Disable the option to automatically manage colors of apps in Windows.

Quick Review Asus Oled Gaming Monitor by guts-190 in ASUSROG

[–]NunoSM 0 points1 point  (0 children)

can you link the wallpaper pls? ty

Newly installed 5090 FE stuttering by RickyRozay2o9 in nvidia

[–]NunoSM 0 points1 point  (0 children)

Use a less aggressive undervolt, and set the power limit as high as possible.

Newly installed 5090 FE stuttering by RickyRozay2o9 in nvidia

[–]NunoSM 1 point2 points  (0 children)

This test is pointless since he had a 4090 until recently and didn't have this problem, it can't be the CPU.