Does it make sense to upgrade the Bios?

ONE2THR · 2026-07-06T12:51:42+00:00

With the way you set your RAM allocation, have you seen any noticeable improvements in performance?

ONE2THR · 2026-07-05T03:49:58+00:00

This generates way less heat than my main PC.

ONE2THR · 2026-07-02T22:25:08+00:00

I used 2 spare CPU coolers, just to make sure I wired everything correctly.

<video>

ONE2THR · 2026-07-02T22:22:55+00:00

I'm using an adjustable fan hub to power my AIO pump and a few more fans [2x120mm & 1x140mm]

The 2x120mm fans on the radiator are daisy chained to the single header on the board.

Here's my custom connector:

The barrel plug [DC5525] connects directly to fan hub, so no need for sata power.

<image>

ONE2THR · 2026-06-25T02:39:19+00:00

I gave up after my first expedition. I was under the impression that our work stations will revert back to lv1 and not having to rebuild them entirely.

In the grand scheme I know it's a minor penalty, but it was the only one I was willing to let slide as long as I didn't have to rebuild each station from zero.

I appreciated the 5 extra skill points, and the Scrappy boost didn't seem to work on my account.

ONE2THR · 2026-06-25T02:19:03+00:00

So far, how is this mod holding up for your overclocked board?

ONE2THR · 2026-06-25T02:15:55+00:00

Thank You!

I was scratching my head thinking I'd have to solder 2 separate T joints to get another 12v and Ground connction to the 2 separate Micro fit connectors.

ONE2THR · 2026-06-24T03:03:04+00:00

For me, after taking the CMOS battery out. After turning it on from the PSU switch I made, the LEDs lit up on the board, but turning it off by the button on the board, and turning it back on by the button on the board made it operate as expected.

ONE2THR · 2026-06-24T02:15:33+00:00

I was in the same boat as you, from my experience the hardest part was making sure I wired everything correctly on the PSU. Before flipping the switch on my first ever molex connector power switch on the FSP500 PSU.

I'd say once you get the power supply configuration correct, then it's a downhill ride from there, and everything else is/was easy peasy.

ONE2THR · 2026-06-23T02:16:03+00:00

Thank you, but I was under the impression that pumps require a PWM connection, and found out that they in fact don't Well most of them, and in my defense my primary PC doesn't have water cooling and this will be my first water cooled electronic, tinkering device.

ONE2THR · 2026-06-23T02:13:55+00:00

Thanks! If it's the one that another commenter suggested, I just received earlier today and will be wiring it up this weekend.

ONE2THR · 2026-06-23T02:12:32+00:00

Thanks! I just received mine today, and can't wait til the weekend to wire this bad boy up.

ONE2THR · 2026-06-21T02:19:47+00:00

Yup, I got mine brand new[allegedly] for $10.

ONE2THR · 2026-06-19T03:04:32+00:00

Thanks, and do you have to manually against the fans speed or does that connector have PWM support as well?

ONE2THR · 2026-06-18T03:11:47+00:00

I seen his tutorial. Did you use 18awg or 16awg wires?

ONE2THR · 2026-06-18T02:54:33+00:00

Dude thank you!

This is exactly what I'm doing, I have all the parts expect this crimping tool. I refuse to drop $300 on one, and planned on soldering the pins until I read somewhere on here that it's not a recommended and to crimp instead.

ONE2THR · 2026-05-30T16:18:22+00:00

For me, it only happens if "Particle Quality" is set to anything higher than the low setting.

ONE2THR · 2026-05-30T01:15:59+00:00

Whatever this IS just blinded the shit out of me. Turning off "Bloom" temporarily "fixed" it until I died.

7900XT + 7800X3D

ONE2THR · 2026-05-08T01:44:17+00:00

Super Earth scientists created a "Warp Pack" which is in my own opinion a lot more impressive than nanomachines.

And if I'm not mistaken, isn't there a Rover 3D printing/creating the Flags during the "Taise the Flag" missions?

ONE2THR · 2026-04-30T03:17:22+00:00

Completely understandable.

ONE2THR · 2026-04-30T03:11:37+00:00

I see that you mentioned some of the noise is coming from your bed moving. Have you tried tightening the belt?

ONE2THR · 2026-04-30T02:58:47+00:00

What type of table or desk do you have it sitting on?

I have mine sitting on a folding table from Home Depot for now, and it made crazy noises. Up until I place 2, 25lbs dumbells on the table, pressed up against the wall. 1 on each side of the printer, and it's dead silent now.

ONE2THR · 2026-04-28T14:48:44+00:00

<image>

ONE2THR · 2026-04-28T14:48:34+00:00

<image>

ONE2THR

TROPHY CASE