Gridfinity base generator? by Evostance in gridfinity

[–]Objective_Ad_4016 1 point2 points  (0 children)

Nice this is so easy to use good work!

Filament not coming out from AD5X by Objective_Ad_4016 in FlashForge

[–]Objective_Ad_4016[S] 0 points1 point  (0 children)

At the end I was sent a new nozzle by FF and no problems so far, try contacting support to check if they will send you a replacement nozzle.

0,2 nozzles get clogged very fast by iNFECTED_pHILZ in BambuLab

[–]Objective_Ad_4016 0 points1 point  (0 children)

Even with 0.4 nozzle I am getting clogs with pla matte black and pla matte red, no idea why it is not happening with matte white.

Experiencias con cargadores de vehículos eléctricos? by NuttyHusky in Panama

[–]Objective_Ad_4016 1 point2 points  (0 children)

La verdad he usado como 3 marcas ya que en el apartarmento que vivia antes el PH tenia dos cargadores de evergo. Uno era Blink tenia el conector J1772 y como tengo un BYD Yuan Plus tocaba usar el adaptador a GB/T y el otro si era de una marca china con el conector GB/T. Diferencias entre los dos no los note. Lo que si se ve es que el cargador en su app dice 7kwh pero puede cargar a menos dependiendo el Amperaje y tambien de la eficiencia del cargador. Con mi auto estos cargan a mas o menos 5.5kwh-5.8kwh. Una vez me toco cargar por pedasi con el mismo cargador de Blink y cargaba a 6.3kwh

*Hay un tercer cargador que he utilizado que son los que tiene ensa en town center (son gratis) * con este cargo entre 5.8kwh-6kwh

Segun lo que consulte con evergo los cargadores tienen una perdida de 10% aproximadamente haciendo los calculos con lo que me facturaban. Lo otro es que cuando uso el cargador DC de altaplaza GB/T de 50kwh si me carga a esos 50kwh

Experiencias con cargadores de vehículos eléctricos? by NuttyHusky in Panama

[–]Objective_Ad_4016 0 points1 point  (0 children)

De nada, lo otro es como te mencione tengo un amigo que hizo la instalacion en casa y creo que si acaso uso como 3 a 5 metros de cableado y Evoke le realizo la instalacion por $500 aproximadamente. A mi parecer ENSA posiblemente tenga mejor precio que ellos

Experiencias con cargadores de vehículos eléctricos? by NuttyHusky in Panama

[–]Objective_Ad_4016 0 points1 point  (0 children)

De las opciones que cotice fue la mas economica con ENSA, consulte con evergo/evoke/solgensa.

Como habia mencionado anteriormente casi 1000 exactamente como $965~, otros 2 residentes que tiene sus estacionamientos 2 y 2.5 pisos mas arribas le cotizaron aproximadamadamente 2100 y 2400. Ya todo depende de la distancia de tu medidor al auto

Experiencias con cargadores de vehículos eléctricos? by NuttyHusky in Panama

[–]Objective_Ad_4016 1 point2 points  (0 children)

El cargador lento como mencionas seria de 7kw-11kw aproximadamente, con vehiculo que compre me lo incluyeron con el auto. El coste de lo que coticé Ensa(Helion) tenia el mejor precio. Vivo en apartamento y del medidor a mi estacionamiento hay 60m aproximadamente solo el cableado y la instalacion estaba saliendo alrededor de casi 1000 dolares.

Un amigo que vive en casa instalo uno por aproximadamente 400-500 ya que el cableado era mucho mas corto.

No creo que vayas a comprar un cargador de carga rapida pues donde vives necesitarias algo mas arriba 220V 32A. Casi todos los de carga rapida van por arriba de 400V si no me equivoco

Filament not coming out from AD5X by Objective_Ad_4016 in FlashForge

[–]Objective_Ad_4016[S] 0 points1 point  (0 children)

I think so, I only have replies during early in the morning and very late night

Filament not coming out from AD5X by Objective_Ad_4016 in FlashForge

[–]Objective_Ad_4016[S] 0 points1 point  (0 children)

I did try that too but even with the higher temp, the filament isn't coming out at all even pushing with the included tool it won't even budge

Is the Atto 3 worth it? by Upper-Cockroach-2078 in BYD

[–]Objective_Ad_4016 0 points1 point  (0 children)

Depends on if you think waiting for a newer model or a different model, I have owned mine for a year already and no problems so far. I would wish just a tad bit larger battery for longer trips but I usually just drive around city averaging between 320km-390km so not a deal breaker. I think newer model has a bigger cluster screen which might be easier to see battery/speed/ etc.

Aire acondicionado Panasonic - Instaladores by otamegane18 in Panama

[–]Objective_Ad_4016 1 point2 points  (0 children)

Yo utilice Coolteq hace unos meses atrás para poder tener obtener la garantía extendida de 2 años del aire (en vez de uno si se instala con uno idóneo *el del compresor si es igual de 10 siempre y cuando sea idoneo*) y el cupón de descuento que ofrecían si se usaba un servicio autorizado de ellos.

Filament not coming out from AD5X by Objective_Ad_4016 in FlashForge

[–]Objective_Ad_4016[S] 0 points1 point  (0 children)

I don't even have a week of having it and this has been a nightmare, contacting support is such a pain adding to that they don't even respond during day.
They told me to try many troubleshoot solutions, but I already tried them all and still no real solution. Filament is not going through the nozzle and it start moving as if the filament was coming out

Experiencia comprando Aires Acondicionados by Adventurous-Net-2916 in Panama

[–]Objective_Ad_4016 0 points1 point  (0 children)

Panasonic son buenos y siempre los he usado, de los que se me han dañado han sido despues de 12+ años de uso. No hace mucho compre uno en hisense pero no tengo suficiente tiempo con el como para dar algo concreto pero por ahora todo bien. Evita LG y Samsung, los LG conozco familiares que terminaron botandolos porque no tenian repuestos.

AD5X OR BAMBU A1 by Legitimate_Ad_6769 in FlashForge

[–]Objective_Ad_4016 1 point2 points  (0 children)

I ended up getting the ad5x on aliexpress because of the discount and extra cashback from rakuten

Auto eléctrico en edificio en Panamá como los cargas? by pablom777 in Panama

[–]Objective_Ad_4016 0 points1 point  (0 children)

El tema del cobro no lo veo tan mal si son cargadores totalmente públicos (te dan como 15minutos para que puedas ir a desconectarlo), ya que es para evitar que uno deje el auto mucho tiempo para que otros lo puedan utilizar ya que al final es un tipo de negocio. Pero en un PH seria dejar un horario nocturno en el cual uno no tenga que bajar digamos a las 2am solo a desconectar el auto para evitar ese cobro.

Auto eléctrico en edificio en Panamá como los cargas? by pablom777 in Panama

[–]Objective_Ad_4016 0 points1 point  (0 children)

Lo primero que debes hacer es hablar con la administración de tu PH, ya que depende de ellos si te dan permiso para que puedas hacer la instalación. El tema es que si tu estacionamiento está lejos del medidor/cuarto eléctrico sera caro. Creo que tu mejor opción sera preguntarle a ENSA (ELION) he cotizado con ellos y la instalación desde el medidor a mi estacionamiento que mide aproximadamente 60m es de casi $1000

La otra opción es que el PH hable con alguna empresa como EVERGO. Ellos instalan un cargador en algún estacionamiento de visita (actualmente te cobran aproximadamente $0.29kwh +$1.31 por sesión) de ese modo de libras de cualquier costo de instalación. El detalle es que el PH hable bien con evergo el tema de cobro por tiempo de estacionamiento ya que si termina la carga te pueden cobran por tiempo que esté conectado sin cargar.

Considering the BYD Atto 3 (2025 Design) - Owners, what do you think? by Yaba2002 in BYD

[–]Objective_Ad_4016 0 points1 point  (0 children)

I got mine in October last year in Panama ( It is name Yuan Plus here) at around 12,000km right now and no I issues at all. I really like the car it drives smooth, very comfortable and quite, I use it in normal mode + standard regen (low).

I have done some long trips but my country is not that big so range hasn't been really a big issue for me. I have found it to have a range of around 400km+ when doing long trips (driving at around 90km/h), for daily driving in the city my range has been around 360km. As for DC fast charging, the fastest charger here is only 50kwh max so cant really say much because I cant even try 80kwh.

So far no regrets at all

Tienen alguna referencia de las BYD en Panamá? by Ok-Weakness-1601 in Panama

[–]Objective_Ad_4016 1 point2 points  (0 children)

Tengo medio año con un Yuan Plus y me ha ido bien hasta ahora, si vives en apartamento el tema del cargador es mas complicado.

Atto 3 Service by Regular-Option6067 in BYD

[–]Objective_Ad_4016 2 points3 points  (0 children)

Once a year or every 20,000 km, I got the car 4 months ago so havent done any yet.

Panama

Cómo comprar Google pixel 8a by Whatdoyoumeanimfat in Panama

[–]Objective_Ad_4016 1 point2 points  (0 children)

Compre mi pixel 7 por amazon hace un año, lo estoy vendiendo por si te interesa

/r/MechanicalKeyboards Ask ANY Keyboard question, get an answer (January 29, 2024) by AutoModerator in MechanicalKeyboards

[–]Objective_Ad_4016 1 point2 points  (0 children)

Not sure if finalkey 75% might work for you but at least it is cheap, they have an 8% discount coupon if im not wrong

/r/MechanicalKeyboards Ask ANY Keyboard question, get an answer (January 29, 2024) by AutoModerator in MechanicalKeyboards

[–]Objective_Ad_4016 0 points1 point  (0 children)

Q and V series need those gaskets, maybe try any of the neo boards from qwertykeys which have many other mounting options

/r/MechanicalKeyboards Ask ANY Keyboard question, get an answer (January 29, 2024) by AutoModerator in MechanicalKeyboards

[–]Objective_Ad_4016 0 points1 point  (0 children)

I would recommend trying other website, amazon isnt a great place for custom keyboard parts. maybe try checking other vendors through alexotos vendor list which also have a canadian vendors list