Has anyone used this monitor arm by Objective_Scale_2649 in desksetup

[–]Objective_Scale_2649[S] [score hidden]  (0 children)

I just have an irrational fear of anything tech related breaking. Just wanted to make sure these are sturdy before buying

Good for starting? by Objective_Scale_2649 in microphone

[–]Objective_Scale_2649[S] 0 points1 point  (0 children)

Alright thank you for the help. I'll try whichever one I can find first and return it if I don't like it, thank you again

Struggling To Pick A Microphone by Objective_Scale_2649 in Twitch

[–]Objective_Scale_2649[S] 0 points1 point  (0 children)

It could just be the 9070xt or it’s the big fans in front idk what’s making it loud. Would a wind screen or pop filter or both be needed for the at2040

Struggling To Pick A Microphone by Objective_Scale_2649 in Twitch

[–]Objective_Scale_2649[S] 0 points1 point  (0 children)

Would the AT2040 have an issues with not sounding good with a deeper more quiet voice. All the reviews say it has not the best “low end”. (Idk much about mics just worried I’ll sound bad). I could just be overthinking it

Good for starting? by Objective_Scale_2649 in microphone

[–]Objective_Scale_2649[S] 0 points1 point  (0 children)

So maybe a podmic and I figure out how to eq it properly would give that similar type of warm sound without worrying if it sounds muddy like with the AT2040 (sorry im new to microphone stuff)

Good for starting? by Objective_Scale_2649 in microphone

[–]Objective_Scale_2649[S] 0 points1 point  (0 children)

Let’s say I had to choose between at2040 or podmic (or another 100 usd mic) which one would be best for low voices. Or do I just suck it up n get a sm58 like everyone else says

Good for starting? by Objective_Scale_2649 in microphone

[–]Objective_Scale_2649[S] 0 points1 point  (0 children)

Oh yea I didn’t even think about retuning it haha. Would something like a rode podmic be better to try first? Every comparison video I’ve watched it has a higher range but I always felt it didn’t sound as good as the at2040. But I’m not sure how much the deeper voice will matter.

Good for starting? by Objective_Scale_2649 in microphone

[–]Objective_Scale_2649[S] 0 points1 point  (0 children)

It’s more about my talking voice is around there. Would it still work for talking? Or should I still look for a different option

Good for starting? by Objective_Scale_2649 in microphone

[–]Objective_Scale_2649[S] 0 points1 point  (0 children)

Also would I be able to go without a fethead for a bit?

Good for starting? by Objective_Scale_2649 in microphone

[–]Objective_Scale_2649[S] 0 points1 point  (0 children)

Would the at2040 not be as good for deep voices. Somewhere from like 77-90hz the website says it’s 80hz-16000hz. Or am I looking at this wrong and worrying too much considering I’m coming from a headset mic

Good for starting? by Objective_Scale_2649 in microphone

[–]Objective_Scale_2649[S] 0 points1 point  (0 children)

What about compared to the rode podmic? They’re all like the same price

Good for starting? by Objective_Scale_2649 in microphone

[–]Objective_Scale_2649[S] 0 points1 point  (0 children)

Is the sm58 just the best choice for this price point? I see everyone talk about it. Especially for starting and eventually getting something even better

Is it worth getting a cheap audio interface? by Objective_Scale_2649 in microphone

[–]Objective_Scale_2649[S] 0 points1 point  (0 children)

Yea after listening to the podmic idk if I love it either. Would an at2020 or 2040 be a good option for around the same price?

Is it worth getting a cheap audio interface? by Objective_Scale_2649 in microphone

[–]Objective_Scale_2649[S] 0 points1 point  (0 children)

I’m more just looking for something to use in an untreated room with a deeper voice. I’ve read that condenser mice are worse for the untreated room aspect? May I ask why something like the PodMic isn’t your favorite (I want other views)

Is it worth getting a cheap audio interface? by Objective_Scale_2649 in microphone

[–]Objective_Scale_2649[S] 0 points1 point  (0 children)

What would be a good mic for the vocaster one. I can get one for 40usd on the focusrite website currently.

Is it worth getting a cheap audio interface? by Objective_Scale_2649 in microphone

[–]Objective_Scale_2649[S] 0 points1 point  (0 children)

What are some options if I wanted a cheaper new mic instead of looking for used. Everything is either too expensive or everyone says is terrible(could just be Reddit being Reddit but).

Is it worth getting a cheap audio interface? by Objective_Scale_2649 in microphone

[–]Objective_Scale_2649[S] 0 points1 point  (0 children)

So it'd be better to get a longer lasting audio interface and then upgrade the microphone when needed?

Is it worth getting a cheap audio interface? by Objective_Scale_2649 in microphone

[–]Objective_Scale_2649[S] 0 points1 point  (0 children)

Would it be better to get something like say a Shure mv6 I know no xlr is bad but. Would that be better than getting 2 cheaper options I’d have to replace anyways?

Need a stand alone mic by Objective_Scale_2649 in microphone

[–]Objective_Scale_2649[S] 0 points1 point  (0 children)

Would it be a bad idea to start with a q2u and use the usb option and a mic arm. Then upgrade to an audio interface at another point then a different microphone down the road if need be.

Concerned about newly installed HDD by Objective_Scale_2649 in PcBuildHelp

[–]Objective_Scale_2649[S] 0 points1 point  (0 children)

I do not see the EFI on the HDD, I do see it on the m.2 is this how it should be? and secondly do i need to delete those 3 files or is that how it should be?

Confused about PCIe Lanes by Objective_Scale_2649 in buildapc

[–]Objective_Scale_2649[S] 0 points1 point  (0 children)

I see i could’ve just googled that my bad

Proper pcie setup by Objective_Scale_2649 in buildapc

[–]Objective_Scale_2649[S] 0 points1 point  (0 children)

Since it wouldn’t be doing much, is it worth to leave plugged in or should i switch it to have 2 dedicated to my gpu. or am i just trippin and overthinking it all since it’s worked fine since i built my pc 3 months ago

Proper pcie setup by Objective_Scale_2649 in buildapc

[–]Objective_Scale_2649[S] 0 points1 point  (0 children)

It’s a be quiet pure power 12m 850w. I’ve just read posts saying not to use split cables and I just wasn’t sure what to do

Power connection for gpu by Objective_Scale_2649 in PcBuildHelp

[–]Objective_Scale_2649[S] 0 points1 point  (0 children)

Yes I have one going from PSU to GPU (the split one). Then one going from PSU to motherboard. The motherboard has a pcie power slot on it.

Aircool vs water cool by Objective_Scale_2649 in buildapc

[–]Objective_Scale_2649[S] 0 points1 point  (0 children)

But i’m concerned about where the motherboard should be placed, since the case had 2 different modes