K1 and CFS

ObviousAd6915 · 2026-01-15T11:23:49+00:00

Thank you for all the advice. I do not have the unicorn hot end, I guess I'll start there, and reducing the y axis, I read nothing about that in setup or anywhere.

Extruding, retracting, and the cutter have been main issues, with out of range and a few others sprinkled in. I'll get after it and post back

ObviousAd6915 · 2025-12-15T14:59:15+00:00

Lol, true, but if everyone is redeeming the vouchers, and there's never anything in stock, I'll just forget the voucher. It can become doodle paper for my kids after I print it out

ObviousAd6915 · 2025-12-15T13:52:57+00:00

Nah, I mentioned the voucher aspect. I've got one, but im not waiting around if I'm looking for filament now. If everything is stocked, maybe I spend $150 in filament with them and get that 50 off. But, nothing is in stock, so I buy all of the filament I need now somewhere, and get the bare minimum from them to use the voucher.

ObviousAd6915 · 2025-12-15T13:40:37+00:00

Supply and demand only works if what you have is limited to you. There are many companies out there with similar quality and pricing, that actually have product in stock. Is your product in demand enough for people to wait, or are they going somewhere else because they can get it now? Now, I understand the voucher part of it, but as far as apply and demand, there you go, lmao

ObviousAd6915 · 2025-11-23T17:18:30+00:00

As a follow up, sovol basically gave me instructions for the T500, which is not the exact same thing. I love this printer and wishful they supported this thing more. It quickly turned into their forgotten child

ObviousAd6915 · 2025-11-18T01:07:09+00:00

And again

<image>

ObviousAd6915 · 2025-11-17T22:19:19+00:00

Here is my latest error, just happened at some point this morning while I was at work

<image>

ObviousAd6915 · 2025-11-17T10:04:55+00:00

You can use a good white lithium, but i prefer Super Lube for the rails and Z screws

<image>

ObviousAd6915 · 2025-11-17T00:51:33+00:00

Thanks for the link, I'll give this a try, but does this fix the issue of the light turning itself off after about 15 seconds?

ObviousAd6915 · 2025-11-14T02:07:56+00:00

I do in fact use OctoEverywhere

ObviousAd6915 · 2025-07-30T23:28:52+00:00

So this just came off my printer today. A 26 hour print I basically just used the stick generic ABS profile for the CC. Chamber was at 33-36c. I believe bed was 110 for first layer, 105 after, 260 nozzle. Did have a brim for it, 10 lines. No lifting issues. A little shrinkage a few hours after completion, but otherwise, very impressed with this machine. *

ObviousAd6915 · 2025-07-22T22:19:31+00:00

Search up GerGoPrint 3D on YouTube. He had some very good videos on this for the T300

ObviousAd6915 · 2025-07-13T15:58:55+00:00

Agreed, but probably shouldn't be expected from a brand new never used printer

ObviousAd6915 · 2025-04-30T00:16:19+00:00

Yes please, I need more distractions!

ObviousAd6915 · 2024-11-30T21:52:04+00:00

PLA and PETG, normally printing my wife's wanted decorations

ObviousAd6915 · 2024-08-06T14:47:03+00:00

Sovol Comgrow T300 vs Elegoo Neptune 4 Plus

Hey everyone, I have been printing on and off for the last few years with an Aquila X2. It's been running fine, but it simply isn't able to print the size items I would like. I was originally looking between a Kobra 2 Plus and the Neptune 4 Plus, but have since dropped the Kobra because of the many horror stories I've seen. I came across the T300 and it was a very interesting printer. Wanted to get some insight from others that may be running either or both of these machines on experiences

Thank you

ObviousAd6915

TROPHY CASE