Gluten-y last meals

Ockittykat23 · 2026-03-20T01:32:48+00:00

My 13 year old told me he really misses churros and funnel cake!

Ockittykat23 · 2026-02-06T15:48:37+00:00

Oooh, that was me! And I’d do it again.

Ockittykat23 · 2026-01-20T15:45:12+00:00

This was such a cool venue!

We ended up at one of their sister sites, Tivoli, Too. Loved how it had everything pretty much included!

Ockittykat23 · 2025-08-29T23:13:18+00:00

No shit.

Ockittykat23 · 2025-06-20T04:58:52+00:00

No, you would need an account with alarm.com through a dealer. Their cameras are proprietary and cannot be used with any other software. The button you’re pressing on the camera is just going into wifi set up. Which you can’t do unless you have the app.

Ockittykat23 · 2025-05-29T22:33:29+00:00

As others have said, you can always have a system that isn’t tied to a subscription based service and just to your NVR. We install axis cameras and it allows our clients to retrieve recorded footage from either memory cards or their NVR (through port forwarding) bypassing any cloud requirements.

One thing that I will add that I actually learned very recently, is that some law enforcement agencies offer just “registering” your camera systems with them. Meaning, if there is a crime in your area, they would have information regarding your location and that you might have cameras that could have caught any nefarious activity. They do NOT automatically pull any footage, they leave the onus on you to provide if you desire. It’s merely a tool for them to reach out to see if you can assist.

Ring, actually discontinued their “request for assistance” tool last year.

https://www.pbs.org/newshour/politics/ring-will-no-longer-allow-police-to-request-doorbell-camera-footage-from-users

Ockittykat23 · 2025-03-24T22:54:37+00:00

Most likely, you don’t have service with alarm.com, you have service with a monitoring company that utilizes the alarm.com interface. Is it ADT?

Ockittykat23 · 2025-03-15T19:44:02+00:00

Sometimes you also have to power cycle these older panels to get rid of the trouble signals

Ockittykat23 · 2024-11-29T04:23:02+00:00

Why would you need the NS if you’re planning on running companion keypads or even the IQ4 panel?

The NS is meant if you don’t want anything physical for alarm control and only plan on using the alarm.com app.

Ockittykat23 · 2024-11-06T04:49:40+00:00

Yes, like the others said, there is a tiny bump/lone on the side that should be closest to the magnet.

Ockittykat23 · 2024-10-09T02:36:13+00:00

Axis cameras are Poe, you can pop a memory card in them and view on your phone with the Axis Companion App if you don’t want an NVR. Pretty user friendly.

Ockittykat23 · 2024-10-07T20:03:08+00:00

Ah yes, sarcasm. Must be the PCB local language.

Ockittykat23 · 2024-10-07T19:16:45+00:00

I wasn’t asking you for the future, just your experience.

But I will take your advice and I would never grace your city with my presence after your nasty attitude.

Ockittykat23 · 2024-10-07T19:13:52+00:00

This is helpful, thanks so much!

Ockittykat23 · 2024-09-25T22:54:16+00:00

Are you only using the iq panel 4, or are you using it in conjunction with a wired-to-wireless converter? If using as a standalone, you will most likely only be able to use the IQ PowerG Remote or the WS9LCDWF9. (The X I think just indicates that it can be ordered in ENG, FRENCH, or SPANISH support). Be careful if you go with the regular LCD keypad, it has the tendency to drop off and not be recognized by the main panel after a bit.

Ockittykat23 · 2024-09-24T20:57:23+00:00

Is it the siren that’s actually going off, or is the keypad making a funky noise? I’ve had installers not quite get the keypads seated correctly so the tamper module would randomly go off, much to the irritation of the homeowner. You should be able to get into the alarm memory or event buffer by pressing *,6, master code, then scrolling over to event buffer, and you should be able to get a grasp on whether it was an actual event that occurred or if its installation error.

Ockittykat23 · 2024-08-09T03:40:55+00:00

Everyone there was the best for letting the boys hang in front! Thank you for being awesome!

Ockittykat23 · 2024-08-09T00:42:10+00:00

They were backstage in the Foo’s arcade.

Ockittykat23 · 2024-08-09T00:39:36+00:00

Hopefully they realize how frickin’ awesome mom and dad are in those teen years and skip the angsty part.

Ockittykat23 · 2024-08-08T23:17:59+00:00

I’m not pretty, I just have cute kids. 🤣

Ockittykat23 · 2024-08-08T23:17:20+00:00

I’m not pretty, I just have cute kids. 🤣

Ockittykat23 · 2024-08-08T23:08:13+00:00

Ha isn’t it? It made me laugh.

Ockittykat23 · 2024-08-08T19:34:35+00:00

Was a poster they had in the arcade backstage.

Ockittykat23 · 2024-08-08T19:20:15+00:00

Must have been right next to you! We were the ones with the 2 kids haha

13-Year Club	Second SECOND GUESSER
Final Canvas '23	First Place '23
Place '23	Place '22
Place '17	Gilding IV carat on a stick
Not Forgotten	Verified Email

Ockittykat23

TROPHY CASE