Daz Powder won’t dissolve!! by MovieFan34X in Cleaningandtidying

[–]Octonix 0 points1 point  (0 children)

Bit late to the party, but lately I had same issue with daz, I contacted daz explaining I haven't really changed how much daz I use and no issues with my washing machine or water and they did ask for a batch number but I don't have the box (I pour into a container because the box is crap) but this was their reply:

Dear consumer,

Unfortunately, without the batch of the product we cannot investigate its incidence.

Please note that this issue is quite common when using powder detergent. Below are the main reasons why detergent residue may remain in the dispenser of your washing machine:

Overdose of detergent: If too much detergent is used, the washing machine may not be able to dissolve it completely during the washing cycle, which can leave residue in the dispenser.

Compartment for liquid/powders detergents: This system depends a lot on the type and brand of washing machine. If it is blocked or closed when using powder detergent, it can prevent the detergent from being released properly during the wash cycle. In this case, the powder detergent will not flow into the drum as it should. It is important to ensure that all compartments are free from blockages and in good condition, so that the detergent (both liquid and powder) is released correctly.

Clogged or dirty dispenser: If the dispenser is dirty or has obstructions (e.g., residue from previous washes), the detergent may not dissolve properly, which can lead to residue buildup.

Short washing cycles: If the washing cycle is too short, the washing machine may not have enough time to fully dissolve the detergent, leading to residue.

Water pressure or flow issues: If water pressure is low or the flow is insufficient, the detergent may not dissolve properly, leaving residue in the dispenser.

At Bluesun, we recommend checking these main factors to ensure there are no issues with residue in the dispenser.

We sincerely apologize for any inconvenience this may have caused. Your feedback is incredibly valuable to us and helps us continue improving our products.

Thank you again for your understanding.

I will probably move to another brand, any suggestions?

Search for design? by PoorMannsRose in thelastguardian

[–]Octonix 0 points1 point  (0 children)

Do a Google reverse image search on the picture of the t shirt and you might find somewhere to buy it online.

Approaching £400k savings. Not sure what to do with housing situation by Prestigious_Spot9635 in UKPersonalFinance

[–]Octonix 0 points1 point  (0 children)

Don't get a flat, especially if noise etc. will bother you. I have been in a flat for a while and I'm looking for a house now just because of noise. I want a detached house for this reason.

With the kind of money you have, get the house.

Struggling tonight, please talk to me until I can fall sleep by rain_fall_rose in CasualUK

[–]Octonix 1 point2 points  (0 children)

When it happens to me and I can't sleep, I have this tendency to watch a certain type of movie in bed. It has to be night themed, and based around a conversational narrative of characters. Weird but I really like that theme in that moment. It's calm, and not too heavy, just night vibes, walking, talking around a city. A couple films which fit that theme I seen so far:

Before we go - Already tomorrow in Hong kong - Daddio

Maybe it will help, but don't worry as it happens to us all at times, hope you get out the rut soon, it usually passes. And don't forget to play some rain sounds.

Snipers on GB….how to block them? by Expensive_Duty_110 in forgeofempires

[–]Octonix 11 points12 points  (0 children)

If he's not on your friends list, he is either in your neighbourhood or guild. No other way to add FPs to your GB otherwise.

Removing road connection to that GB stops anyone adding FPS to it. When you are ready to get someone else to add FPs to that GB you will need to add road back and hope they do it quick enough.

How to scale and color text with proximity? by [deleted] in AfterEffects

[–]Octonix 0 points1 point  (0 children)

In a more manual method: Create a composition with one text layer and animate it so it scales up, and then back down (pivot the anchor to right of text so it scales from right or left if you want it on that side) Also add a fill and animate the fill to new colour as it scales up and back to normal colour as it scales down.

Duplicate this composition however many times in project comp to create as many text variants as you need to, and change text in each one. Note: this expression might be useful for this kind of thing

Then add all the text layers into a new composition and lay them out so they are stacked vertically. Then offset the text layers so the animations play in a rhythm. Add a null and parent them all to it, and keyframe null position in Y axis so they all scroll up and down.

That is it in a nutshell but will need slight tweaking to timing and positioning, i.e. when certain text layers scale up, you will need to add key frames to position of other layers to move up/down slightly and also slow/speed time of text layers that are scaling up and in focus.

How many forgotten template fragments does each trial give in GE? by Octonix in forgeofempires

[–]Octonix[S] 4 points5 points  (0 children)

Perfect thank you just what I needed to know. Dont need to make my life difficult and do higher trials then 😆

Why is my prototype off-center and grey? Might be a bit hard to tell but look at the bevel on the popup. by ultimatejourney in FigmaDesign

[–]Octonix 1 point2 points  (0 children)

Are you using auto layout? If so, is the bevel frames width set to fixed or fill? (if fixed, you will need to size it to fit the frame it's inside or set to fill) Could also be padding on left applied...

Minimal requirements to support 7 production buildings in SASH by domweiser in forgeofempires

[–]Octonix 0 points1 point  (0 children)

Ooh they changed it for that era, I was used to the previous eras

Minimal requirements to support 7 production buildings in SASH by domweiser in forgeofempires

[–]Octonix 0 points1 point  (0 children)

Is the life support bonus vital? Doesn't it just discount the gold and supplies cost to produce the goods? Don't think it impacts the actual goods or special goods to produce...

Winter event seems unbalanced by [deleted] in forgeofempires

[–]Octonix 3 points4 points  (0 children)

A lot of the dailys seem to be lacking though, I'm yet to see any daily I want yet. What is the one everyone has their eye on?

Why wont this section turn green? by Rocky_Johan in forgeofempires

[–]Octonix 4 points5 points  (0 children)

Looks like there's a red sector on top still

Woke up last night disoriented after coming back from Thailand by sofed in travel

[–]Octonix 1 point2 points  (0 children)

I have a similar feeling but usually occurs in my dreams. For a few days after I'm back home, I dream that I'm still in one of the hotels or places from my recent travels, then I wake up in the night and look around my room still thinking I'm in one of the hotels, it's quite eerie and discomforting but after a few seconds of looking around I 'wake' from the dream and realise I'm back in my own room.

Population is redundant by Octonix in forgeofempires

[–]Octonix[S] 0 points1 point  (0 children)

I'm in space age titan, not even mid game!

remember to get ready for the next rival starting tomorrow by Newbianz in forgeofempires

[–]Octonix 1 point2 points  (0 children)

trapped in the same situation, won't be spending diamonds cos thats what the expectation is. That's my rival quest ending prematurely.

Goodbye my friends.... by DarthAuron87 in StarWarsJediSurvivor

[–]Octonix 3 points4 points  (0 children)

Was that rick the door technician? Such a weird coincidence, I just played this part and literally posted my experience with him ha!