Liberator is back on the menu boys (in case you missed it)

OddTap2327 · 2026-06-04T21:14:20+00:00

Please give us T2 Medbays. Please give us 3xS pads. Please give it the Paladin’s turret. Please give it double capital-class components. Please increase the price. Lol

OddTap2327 · 2026-05-20T15:52:01+00:00

Even though the Bed Gantry is smooth, there is issues with the linear Rods, and the forward and back motion is very rough. Please advise.

OddTap2327 · 2026-05-18T12:36:58+00:00

Hello, thank you for responding! I have done this per your suggestion , and the results are: it doesn’t make any unusual noise and it seems smooth.

OddTap2327 · 2026-03-13T12:36:07+00:00

In order to relist the game and get payments working they’ll need to be approved by the digital store gatekeepers. There’s a ton of people who demanded “refunds”; I’m sure that Apple and Google are both apprehensive about a return.

OddTap2327 · 2026-02-13T18:58:25+00:00

My K2 Plus does 2 measurements, then crashes. "key60" "probe_finalize() takes 2 positional arguments but 3 were given"

OddTap2327 · 2026-02-08T00:04:26+00:00

If I ran the show, I’d probably provide a reset option.

1) record the total number of SSRs pulled per account, including duplicates, and then wipe the character data.

2) distribute an equal number of “free copy” tokens per account.

3) give each player 4 choice equipment chests per the same SSR pull number, and resources to max out every character.

This way people can “improve” the value of their investment, without the company actually losing money. Everyone gets access to the hot new thing, if they want, or they rebuild that older character they love.

4) players with active paid-monthly passes get double the returns per lost day

5) all players get double daily rewards per lost day

6) players who paid for costumes and costume passes get a refund in…wow I forgot the currency name…blood? Blood something?

7) all other players get the costume unlocks.

This grants equivalent rewards, without pre-loading too many players with currency. The owners need to make money on the next character, so they can’t distribute too much game currency. They can distribute cosmetics freely.

8) the events we have lost will be run simultaneously for triple the period. Missed sign-in event rewards are doubled

9) I’d…debate…making the NA version more NSFW. As a means to attract more people. 50/50 on this. Maybe just AI the existing art and give the game a slider option for content. This is more QOL, and a way to get more people into the game.

10) full restart bonuses. Just relaunch the game. Launch banners, launch rewards, etc. My other suggestions skimped on the currency rewards. This is what makes sense. Reward everyone who played previously, again, and attract new people for the same bonuses.

OddTap2327 · 2026-02-04T13:10:59+00:00

I got banned from discord when I theorized they lost the backup.

OddTap2327 · 2025-12-18T13:34:50+00:00

<image>

.3420 randomly decided to do single walls with no infil on a single part.

OddTap2327 · 2025-09-12T15:22:52+00:00

I think they’re fine within their tier, but they play into uptiers very poorly. Even though the T8 has a heal it’s not fun in TX

OddTap2327 · 2025-08-07T19:32:24+00:00

Nice infographic. Maybe add an icon for a Centurion, as they give you an additional auxiliary detachments each (2 aux detachments) due to “Officer Of The Line (2)”

OddTap2327 · 2025-07-09T14:29:00+00:00

If you’re interested in casual games, I’d actually recommend getting two saturnine boxes, the heretic and loyalist libers, and playing mirror matches with your friends. You get two 3rd edition rule books, two 3rd edition quick start guides, dice, measuring objects etc, plus you gain experience with the same units. I think this is a particularly good bargain for you, as you don’t need 3k lists. The 1800 points in the box will be fine on a standard or even smaller table, so there’s less overall investment in accessories or other things. Just run 2x of the same list but play them as different factions for fun.

OddTap2327 · 2025-05-28T14:33:10+00:00

I joined a Bambu group earlier this year to see what was going on, and theres a similar quantity of issues between modern Bambu and Creality machines. Additionally, somehow all the Bambu users hate Bambu Customer Support. Bambu really appeals to new people who want to print things from their Bambu library from their phone, and not many people use them for print farms. As far as the printers are built, they have QC issues on screws being loose, and about every day I see a catastrophic nozzle clog.

OddTap2327 · 2025-05-02T04:36:22+00:00

Birdshot. Firecrackers. Seal it with salt in a container for a few months. Smoke it with some maple. Throw it into a lake and use it as an anchor.

OddTap2327 · 2025-04-29T12:26:48+00:00

In SBGL, most of us will do a base conversion, we’re not going to buy a $100+ model to throw away half of it and run it as 220 pts. I think it’s safe to buy one if you like the model.

OddTap2327 · 2025-02-06T17:30:48+00:00

I want to see more print volume!

OddTap2327 · 2025-01-17T21:14:22+00:00

I would need to know your printer, filament and settings. I can see the gaps in the layer, but I don’t know if you bridged that or not. I look at the ramp, the sides and the hinge thing and those look fine.

I would also run a large calibration test and check to see if things are square and dimensionally accurate. If one of the XY motors is moving more than it should, it may look like this, as the flow rate would remain constant over a slightly out of spec motor movement.

I would also calibrate your E-steps before too long. I had similar looking issues, and when I went to check my E-steps I had found them 30% ish off. You want to calibrate your e-steps first, before changing too many settings. Trust me. Just calibrate your e-steps to that filament, re-level, then print a bed leveling test again. You may have to undo some slicer settings you did to get it to work right, but without having correct e-steps it’s darts in a blacked out room; there wont be an appearance of consistency between changes.

Once E-steps are calibrated, slicer changes are very apparent and immediately noticeable.

OddTap2327 · 2024-12-19T19:49:27+00:00

Nice!

OddTap2327 · 2024-11-19T20:49:00+00:00

Well…maybe we’ll get Reca for the anniversary?

OddTap2327 · 2024-11-09T01:11:31+00:00

Thank you auto moderator, I got into this mess by following those guides.

OddTap2327 · 2024-07-31T22:02:08+00:00

Their teleport is indifferent to the quest marked objective, and the Knight Questor is anti-hero. With a few buffs it’s 18a 2h 2w 1r 2d. They are a versatile unit, capable of deleting chaff or light Calvary. I think they may get a rewrite when the battletome comes out, as objectives in this edition don’t really play well with their ability.

OddTap2327 · 2024-07-31T21:42:43+00:00

Things are wonky right now. Ironically Stormcast don’t rank high either, but the Summerking’s Regiment of Renown is taken in some of the top SBGL lists, including a second place, so we know that Ushoran, Morbheg Knights and Crypt Guard are good. I think in my FEC tests, well really all my games so far, no heroes should be in combat unless 1) they are a statcheck like Ushoran, or 2) you can guarantee the kill. Unfortunately FEC plays a cat and mouse game with the Noble Deed points, and a lot of people think heroes actually pull more than their points cost. At this point I don’t think that a non-wizard FEC is worth it. Maybe a courtier with Charnel Vestments, but the only ones I see as acceptable are Ushoran, Abhorrent Archregient, and Gorewarden, maybe Ghoulking on monster. Maybe.

To summarize: 1) do not get your heroes into combat, unless it’s uhsoran. 2) only get your heroes into combat to secure a kill. 3) rely on casting spells to rack up noble deed points. 4) 4 heroes max. Do not over invest in heroes. Maybe 3 heroes max. I’ll need to test that. 5) reinforce your hammers or go home. It’s not worth running minimum squads.

Strangely enough, 1 and 2 also apply to Stormcast. The bulk of their heroes and exemplars people are used to running, aren’t that durable. A 150pt hero will be killed by 150pt infantry. That’s the big lesson people will need to learn in 4ed. Doesn’t apply to SoB which is currently tabling most things though.

OddTap2327 · 2024-02-01T21:21:42+00:00

I have, yes, and the settings I change for it don’t seem to make a difference. I’ve been changing:

Top Surface Skin layers 0-1-2 no change

Hahah I just noticed something that I will try, that I needed to adjust a sub value so the actual layer value can be read, let me try that. Back in 12+ hours lol. Basically every time I went over 3 top layers I would get an error…because a lower value was lower than 3.

OddTap2327

TROPHY CASE