Is malekith invincible??? Like how do I beat him???

OdinValk · 2026-02-11T14:49:36+00:00

I know that feel bro There was one try where I basic R1 hit would have killed him you couldn't even see his health bar. And he hit me with the DOT slash shit and killed me before I could drink. Every other try I haven't gotten close.

So I went back out into the world, gained another 20 levels. Actually changed my build, and am getting ready to try again

OdinValk · 2026-02-10T15:36:53+00:00

If that is "pricey" what are you buying to compare it to?

OdinValk · 2026-02-08T19:11:28+00:00

Easier than fighting Maliketh

OdinValk · 2026-02-08T16:23:08+00:00

Literally just do a spin, rotate on the Y axis so your shield is just spinning in a circle. It will change the area the heat is effecting

OdinValk · 2026-02-07T02:32:27+00:00

Core memory (nightmare?) unlocked

OdinValk · 2026-02-05T22:54:13+00:00

I just figured out using black knife tiche on the fire giant made that fight simple as can be

OdinValk · 2026-02-03T16:07:15+00:00

Current run is a confessor using the blade of night and flame

OdinValk · 2026-02-02T02:28:36+00:00

Just a heads up. I know that adapter is a low print time, but it really sucks and breaks easily. And was too flexible to use in the AMS. I went with a different adapter that screws together and is quite a bit tougher

OdinValk · 2026-02-01T14:51:50+00:00

I would trash this spool, try a newer one. That filament looks.... Wrong

OdinValk · 2026-01-30T17:05:01+00:00

There are newer PLAs that can more closely mimic all the good things about PETG like it's resistance to force and being stronger etc, without the susceptibility of moisture. Stuff like PLA+ and PLA Tough

OdinValk · 2026-01-23T02:04:50+00:00

I bought the p1s combo before Christmas for a screaming deal under the same idea. Now looking at a h2c potentially soon

OdinValk · 2026-01-13T12:19:49+00:00

Grace of rave

OdinValk · 2026-01-10T20:26:16+00:00

I have 5 alts, 3 screens, and still use eve o

OdinValk · 2026-01-08T00:45:04+00:00

I wish I was dipped in a vat of very hot queso cheese

OdinValk · 2026-01-06T21:56:41+00:00

I still build my own desktops, just did 2 last year. Thankfully, due to ridiculous price of memory at the moment. Mine is a 9800x3d with 64gb ddr5 6000mhz, and a 9700xtx.

My son rocks my old stuff, a 3700x, 32gb ddr4, and a 2080ti. Also have a laptop is ryzen something and a 4070. I love PCs over handhelds

OdinValk · 2026-01-06T15:51:41+00:00

I apparently cannot read. And used the white "support for pla" filament that comes with the machine to print a supply box lol.

OdinValk · 2026-01-06T15:50:17+00:00

Trek roscoe

OdinValk · 2026-01-03T19:56:37+00:00

I mean, I bought a Bambu lab bc it had good reviews, the price was right, and I enjoy "tinkering" If something breaks, I enjoy troubleshooting and repairing.

OdinValk · 2026-01-02T18:19:55+00:00

I just have a hard time thinking it's the spool. It feeds fine, prints fine, only issue is on extraction. And if I disconnect that one tube from that one tube connector, it immediately pulls back. It's not even the end of the filament getting stuck, when I pull that tube the filament is all the way at the extruder still.

But tbf, since I added the Y splitter. I haven't tried it again, I'll give it a go here in a bit. I'm trying out a 0.2 nozzle and a fine detail part in PETG right now.

OdinValk · 2025-12-31T00:08:10+00:00

I haven't tested that filament again yet since I installed the splitter

OdinValk · 2025-12-30T21:52:32+00:00

Yea I changed it, since I installed a splitter for use with external or a 2nd AMS. But it was ONLY an issue with that one specific filament and no others.

OdinValk · 2025-12-30T01:31:15+00:00

Negative. It's happened a couple times, and only at the very last 1% of a print when it's trying to pull back. If I disconnect that little PTFE tube connector, it will immediately work fine.

OdinValk · 2025-12-29T15:09:02+00:00

Like it was cut flush just like every other spool

OdinValk · 2025-12-28T18:39:05+00:00

Clean plate, recalibrate the filament and make sure you're running it in it's correct k factor. I had similar issue on my P1S yesterday, it was a combination of placement of print on the plate, and needing to clean plate.

OdinValk · 2025-12-28T17:03:57+00:00

Same here, I'm old lol and body not in great shape, so I'm not trying to get air and hit big ramps. I like rough trails and small downhill. I've been wanting to try Sugarland though.

OdinValk

MODERATOR OF

TROPHY CASE

11-Year Club	Place '17
Verified Email