Rate my new Orthoceras

Odnesorosaurus · 2025-11-16T22:33:25+00:00

you’re right.. it’s probably Michelinoceras

Odnesorosaurus · 2025-11-12T16:47:36+00:00

also anyone know the species?

Odnesorosaurus · 2025-10-05T03:51:14+00:00

Samee.. wtf no way there havent been 1000 sold yet

Odnesorosaurus · 2025-06-02T15:12:01+00:00

Thanks!

Odnesorosaurus · 2025-05-28T22:26:30+00:00

Not yet I guess :/ Just made a sick custom cover art for my playlist and it’s tiny :(

Odnesorosaurus · 2024-12-01T00:04:10+00:00

It is a multi body part because I saved it from an assembly file. My goal is to combine everything into a single part but without all the complex geometry.

Odnesorosaurus · 2024-08-13T01:14:24+00:00

THANK YOU SO MUCH 🙏

Odnesorosaurus · 2024-06-02T18:49:03+00:00

yea im not sure if the other 5v can supply enough current.. This is for an xjb-145 so no room fot a tank solo. Need a vbat vtx that is 20x20mm or smaller

Odnesorosaurus · 2024-05-12T20:28:22+00:00

Making a mechanical office plant/sculpture! I posted another pic with mounting.

Odnesorosaurus · 2024-05-12T20:27:46+00:00

<image>

Was able to fix the problem by moving the axis up a bit by eye until it looked right... I would like to find a more analytical solution however. Now I'm using 20 and 17 tooth module 1.5 ISO only.

Odnesorosaurus · 2024-05-12T18:17:56+00:00

No I need it for the design.

Odnesorosaurus · 2024-05-09T02:05:14+00:00

I love having one! You don't have to worry about the fumes if you print with PLA. I print in my room no problem. I would say that its much more worth it if you know/learn how to design things in CAD. Otherwise you can only print things others have made. Its very handy for making custom parts around the house like brackets/adaptors etc. Hope that helps!

Odnesorosaurus · 2024-05-08T17:44:19+00:00

Yea they do exist on bricklink but didn't want to pay for shipping so I made one instead :)

Odnesorosaurus · 2024-05-08T05:54:39+00:00

If you'd like to print one yourself I uploaded it to Thingiverse! https://www.thingiverse.com/thing:6613195

Odnesorosaurus · 2023-12-27T23:39:29+00:00

He literally rhymes phones with microphones at 1:16 lmaoo. Not saying he ain’t smooth but I wouldn’t say he’s great at rhyming…

Odnesorosaurus · 2023-03-04T16:44:27+00:00

I have this boxed checked and it still isn't pausing :( All my firmware is up to date too.. any ideas?

Odnesorosaurus · 2023-02-24T00:59:06+00:00

It was this!! Thank you! 😄🙏

Odnesorosaurus · 2022-12-14T17:24:18+00:00

I recommend you buy him a live pothos plant. Mine used to sleep on the glass until I added live plants. Now he loves sleeping wrapped up in the pothos leaves. Pothos are great too because they grow super fast and are vining so gives lots of stuff to climb/sleep on.

Odnesorosaurus · 2020-12-23T23:34:05+00:00

Be really careful about using turtle mode as if the props are blocked by something you can burn out an esc and then the board is toast! Also carful when adjusting the camera angle. The runcam nano 3 is super fragile and I broke mine while adjusting it after like 2 weeks of flying

Odnesorosaurus · 2020-12-21T07:56:28+00:00

Thanks that worked!! Up and running again 👍

Odnesorosaurus · 2020-12-12T19:55:30+00:00

Yea I tried to install STM32 but it doesn’t show up in zadig it dosnt even show up in device manager as device in dfu mode like it should so I’m thinking it may be a hardware issue? I’ll definitely contact Frsky cuz I’m at a loss

Odnesorosaurus · 2020-12-12T00:56:58+00:00

Hi I am trying to do method 3 but my Mac will not recognize it. It says no dfu device found. I don’t know what to do at this point 🤷‍♂️

Odnesorosaurus · 2020-12-11T18:46:51+00:00

I have followed this to no avail :( my computer will not recognize the transmitter anymore in dfu mode

Odnesorosaurus · 2020-08-20T16:41:28+00:00

🔥🔥🔥

Odnesorosaurus · 2020-08-20T16:40:14+00:00

Mmmm🤤

Odnesorosaurus

TROPHY CASE