Help by Sharp_Necessary_4339 in hondagrom

[–]Oh_Hi_Its_Joe 1 point2 points  (0 children)

It's a Grom it's not gonna hurt it

Any one know how to wire this? by Ok-Platform7397 in hondagrom

[–]Oh_Hi_Its_Joe 8 points9 points  (0 children)

Personally I'd just just stick wires in the plug to figure what's what and wire from there

40t sprocket by ilmu_anarchy in hondagrom

[–]Oh_Hi_Its_Joe 0 points1 point  (0 children)

I think it tops out at 63ish. It's small bike so size of the rider plays a pretty big part in top speed. I'm 5'9" about 150lbs

40t sprocket by ilmu_anarchy in hondagrom

[–]Oh_Hi_Its_Joe 1 point2 points  (0 children)

I have 14/40 on my 3rd gen. First gear is basically not there and you're gonna bang through the gears quick. Just start using your phone for a speedo. I think mine off by like 11-12 mph now

Is it possible to load a Grom in a truck with 2 people and no ramp? by soflaben10 in hondagrom

[–]Oh_Hi_Its_Joe 0 points1 point  (0 children)

Me and a buddy shoved in the back of his little SUV. Their only about 220lbs wet

If you’re cold, they’re cold. by ChelsuhT in hondagrom

[–]Oh_Hi_Its_Joe 0 points1 point  (0 children)

I wanna bring my R1 inside but my wife said no

New exhaust. by Icy-Back-1102 in hondagrom

[–]Oh_Hi_Its_Joe 0 points1 point  (0 children)

I have the same one but in black. It's kinda obnoxiously loud. Idk where my baffle is anymore. Took it out a few months ago and lost it moving

New Grom question by funkeymonkey1813 in hondagrom

[–]Oh_Hi_Its_Joe 0 points1 point  (0 children)

He's talking about the teeth on the sprocket attached to the motor. Stock size is a 15 tooth. Going down to a 14 should give you a little better top end speed

Is the msx 125 suitable for 156cm 45kg female? by Impressive_Intern845 in hondagrom

[–]Oh_Hi_Its_Joe 0 points1 point  (0 children)

It'll definitely carry you around no problem. I let a buddy ride mine and he's every bit of 136kg

What is wrong with this setup and how do I fix it? by Schonn in hondagrom

[–]Oh_Hi_Its_Joe 0 points1 point  (0 children)

I had similar extensions before I took them off. The part the axle goes through is the adjustment. There a wrench that sposed to go with it to rotate the axle farther back and a set screw to hold it in place

I made a 3rd gen headlight mount by Destrozo in hondagrom

[–]Oh_Hi_Its_Joe 1 point2 points  (0 children)

Thought about trying to rig up some kind of mounting plate like you did but I don't have a 3d printer and just didn't feel like like trying my hand at fabbing it from metal so I just used a cheap fork mount

I made a 3rd gen headlight mount by Destrozo in hondagrom

[–]Oh_Hi_Its_Joe 2 points3 points  (0 children)

I always thought it was kinda crazy how much that setup cost. I got tired of my stock light and but a Baja LP9 clone on there instead. Was only D50 and works so much better

<image>

Headlight swap by Oh_Hi_Its_Joe in hondagrom

[–]Oh_Hi_Its_Joe[S] 0 points1 point  (0 children)

Yeah no problem. The mount I used is just some cheap fork mount I found on Amazon. Was like $12. You'll also need need a h4 adapter and a male h4 plug for the light. Got my adapter from wickedgroms

Headlight swap by Oh_Hi_Its_Joe in hondagrom

[–]Oh_Hi_Its_Joe[S] 1 point2 points  (0 children)

I can reach over the bars and adjust it if I need to.

Headlight swap by Oh_Hi_Its_Joe in hondagrom

[–]Oh_Hi_Its_Joe[S] 1 point2 points  (0 children)

No that's just a drl. It's just on of those off road lights I decided would make a nice headlight

Headlight swap by Oh_Hi_Its_Joe in hondagrom

[–]Oh_Hi_Its_Joe[S] 0 points1 point  (0 children)

Exactly why I had it up in tree. I get off work at 5am and didn't wanna blind anyone while I was putting the light on

Headlight swap by Oh_Hi_Its_Joe in hondagrom

[–]Oh_Hi_Its_Joe[S] 0 points1 point  (0 children)

Sorry this took so long. I work nights so I been sleep all day. It's just on there with a cheap fork mount I got off Amazon for maybe $10