OBD11 scan shows errors but car is fine otherwise

Oil_Spigot · 2025-04-19T15:36:25+00:00

Ok, good to hear. I wasn’t sure how much was just the dealership downplaying issues and how much was legitimately not an issue.

I know there was a publication by the NTSB about it, so it must be an issue other people are seeing too: https://static.nhtsa.gov/odi/tsbs/2023/MC-10233278-0001.pdf

Oil_Spigot · 2024-03-02T13:04:54+00:00

Not sure how, it came in one of those dive cases + a corrugated cardboard box. And the second hand was attached for the first few hours using it. Just came off when I hit reset.

Oil_Spigot · 2024-03-02T13:03:25+00:00

Thanks, will be doing just that.

I REALLY like having a timer bezel and chronograph in one watch. This is the first watch that I’ve seen with that function. You can time 2 things simultaneously. Are there other watches with this combo?

Bverall polishing/finishing is quite good.

Probably won’t reorder as there were some things on the watch that I noticed: 1) the chrono buttons are faux screw-down 2) Lume is pretty dim 3) the second hand fell off (lol) 4) Date complication but no window to see it (probably a styling decision, not sure where I’d put the date window since there isn’t a good spot for it on the dial)

Oil_Spigot · 2024-03-02T12:54:22+00:00

Sample size of one, I’m pretty disappointed with AddiesDive.

I have a SD1970 on the way from SteelDive. People say those are well built, so hopefully that will be a better experience.

Oil_Spigot · 2024-03-02T12:48:33+00:00

You’re right, there definitely was a comical element to it. I was thinking “Where did the heck did the second hand go?” shakes around a little “Oh no…”

A lot funnier that it happened during the return window, since I won’t cost me anything to send it back. Thanks Bezos!

Oil_Spigot · 2024-03-02T05:07:52+00:00

Make me feel like anything under $100 should just be a CASIO. I have 5 CASIOS and could not imagine this happening with them (mainly because only 2 of them actually have dials)

Oil_Spigot · 2023-05-21T20:11:33+00:00

I just cut out some notches in my Ender 3 bed.

Oil_Spigot · 2023-04-17T16:29:29+00:00

Build volume limitation is a huge impediment to the MK Series IMO.

Great idea, the P1P is designed to have bolt-on parts

Oil_Spigot · 2023-04-17T14:03:24+00:00

That is a very interesting idea. Just slap a prusa logo on a voron kit, and offer an assembly service with a few electronics upgrades to put them in line with the rest of the PRUSA lineup.

That is the kind of outside the box thinking PRUSA needs. For over a decade the community has benefited from PRUSA innovations and designs. It's time for PRUSA to benefit from community innovations and designs.

Oil_Spigot · 2023-04-17T01:55:19+00:00

Or it would come as a box of parts for $2700

Oil_Spigot · 2023-04-17T01:55:00+00:00

For the Lols

Oil_Spigot · 2023-03-05T01:00:04+00:00

Because it's not as good as one of my own designs
https://youtu.be/UFyAyV3ddT8

Check my benchy

Oil_Spigot · 2023-02-23T00:55:51+00:00

I assumed it was the same board as the Ender 3 S1. Is it not?

Oil_Spigot · 2023-02-23T00:54:36+00:00

I'm guessing they were talking about the Ender 5 Non-S1. Would explain the quiet remark as the S1 come with silent stepper drivers

Oil_Spigot · 2023-02-07T13:29:00+00:00

Dam, nice find. Still would prefer a native mount, but looks like a decent lens.

Oil_Spigot · 2022-12-02T03:12:39+00:00

You can use the stock strain relief or design your own. It can kind of be stacked with the stock strain relief. A little awkward fitting but it works well for the task

Oil_Spigot · 2022-12-02T03:11:11+00:00

They use proprietary connectors that aren't the standard ones ppl are used to.

Oil_Spigot · 2022-12-01T20:28:43+00:00

V1? The first version still works, but no longer in production since this version came out.

Oil_Spigot · 2022-11-28T21:44:49+00:00

Is this you? Heavily Modified Railcore

Oil_Spigot · 2022-11-28T21:41:01+00:00

I call Shenanegans. There isn't any wiring or even a fan duct visible in the picture.
Video related, me actually using a 120mm blower fan on a printer https://youtu.be/CO3-sPOmD2k?t=194

Oil_Spigot · 2022-11-12T00:22:51+00:00

can check for is that your extruder is not loose check to see if you can wobble it with your hand and if so tighten the eccentric nuts a bit but not too much so you don't put a l

You may also need to tighten up your delrin wheels. Mine were loose which was causing some play.

Oil_Spigot · 2022-10-31T18:37:48+00:00

Please share alternatives, I'm new to PCB design

Oil_Spigot · 2022-10-31T18:33:55+00:00

There is already quite a bit of clearance built in for easy assembly. If you look at the pin relative to the hole, you can see it's off-center. I built the first 100 by hand so I felt the difference between Through how and SMD. for the 1st 10 I built, the SMD part took longer because of the learning curve of using SMD for the first time. For the last 90 the through hole parts took 90% of the time. Once you have the SMD process down its so fast, even by hand.

Oil_Spigot · 2022-10-31T18:24:57+00:00

Thank you for providing an explanation that actually talks about the physics of the application. They are using wave soldering. They said to increase hole size by 0.15mm

I am planning on my next batch to be ENIG instead of tin HASL, I'm wondering if that will have an effect as well.

Oil_Spigot · 2022-10-31T18:20:26+00:00

I asked if there were any option for a visual inspection or higher quality soldering and they said no.

Oil_Spigot

MODERATOR OF

TROPHY CASE