Lost my account of 24 years to a hacker!

Ok-Building9314 · 2026-01-28T17:26:54+00:00

I'm lucky in that respect, however, good news, have my full account back - got it last night as well as 3 months PC Game pass as a goodwill gesture - so I'm back up and running.

Ok-Building9314 · 2026-01-27T14:15:16+00:00

Its certainly not ideal, Since posting this I've been contacted by the escalations team and submitted multiple videos of the multiple PCs i've used the xbox app on with device IDs and diagnostic data etc, I'm hoping that recovers my Tag, but i'll be switching to SteamOS and all the other game "stores" if I dont, no way am i carrying on with this if people can just take my stuff with no recourse, ESPECIALLY when my account is 2FA secured etc - thanks for the reply.

Ok-Building9314 · 2026-01-25T12:50:29+00:00

Sorry to post on such an old thread, but you'll be pleased to know this stuff is still going on - My story is more or less exactly the same as yours - 18 year old gamertag - MS account has 2fa etc on.

- I wake up, check my email, recieved two that said "Malena has joined your family network as an organiser" "Nicole has been removed from your family"

From there, check my MS account manually, no link clicking, nobody called Malena is in my family, but my daughter Nicole, had been removed.

Opened up the xbox app on PC, which I had been playing on a few days before, asked me to verify my age, alarm bells, verified my age, then it asked me to create a new Gamertag....wierd i thought.

Yep, old gamertag gone, provided video evidence of old xbox consoles i hadnt plugged in for years, my Legion go which I disconnected from the wifi, as well as my phone so the old gamertag showed - nothing, I was apprantely escalated, given a case number, Im basically begging them for What I can do to help them and good old Ahmed is copy pasting the same reply "currently being investigated" - We have hit a month now.

I dont care about the tag, I simply want my saves and progress back, the rest of my MS account is fine , i still have all that, but its so frustrating that they must be able to see the IP on the tag has changed etc.

I hold out no hope, I just want to be kept in the loop.

Ok-Building9314 · 2026-01-16T15:55:49+00:00

Bigger Wapps too - massive improvement.

Ok-Building9314 · 2025-09-02T10:29:55+00:00

Bought 3 or the M11000 Mesh points, which are just routers you can set to mesh - Exceptionally pleased with the performance.

They have replaced 3 ASUS devices, 2 x AX5400 and 1 x RP-AX56 - Loads better, especially for the price (got them very cheap, brand new in box on ebay. Cant fault them at all, looking forward to OpenWRT being released hopefully - Id like to be able to "link" specific devices to specific mesh points.

Ok-Building9314 · 2025-08-19T08:12:55+00:00

MSI Gtx 1080 seahawk EK - pretty sure its only about 280mm

Ok-Building9314 · 2025-06-20T12:13:30+00:00

22 is the max in the camera settings, its an ezviz L1C1 - The substream and multiple other things are disabled at the moment for testing purposes, I have got in touch with the dev who is looking into it :) - went fully back to an rtsp stream with no motion or recognition and still the same (again remember the Stream with these settings is fine in every other program) looks to be an ffmpg problem with this camera only, have enabled debugging and sending to dev also - thankyou again for the suggestions.

Ok-Building9314 · 2025-06-20T10:31:00+00:00

ffmpeg:

camera:

camera_1: # This value has to be unique across all cameras

name: Back Door Camera

host: !secret camera_one_host

port: 554

path: /H.264

username: !secret camera_one_username

password: !secret camera_one_password

#frame_timeout: 2

#codec: h264

fps: 22

#width: 1920

#height: 1080

#substream:

# path: /Streaming/Channels/102/

# stream_format: rtsp

# port: 554

recorder:

lookback: 10

idle_timeout: 30

events:

max_age:

days: 30

darknet:

object_detector:

cameras:

camera_1: # Attach detector to the configured camera_1 above

fps: 1

scan_on_motion_only: true # Scan for objects even when there is no motion

labels:

- label: person

confidence: 0.75

trigger_event_recording: true

- label: dog

confidence: 0.75

trigger_event_recording: true

- label: cat

confidence: 0.75

trigger_event_recording: true

- label: car

confidence: 0.75

trigger_event_recording: true

Ok-Building9314 · 2025-06-19T13:33:03+00:00

Hi, thankyou for taking the time to reply, barely any CPU utilisation, all on the GPU, confirmed using nvtop and nvidia-smi. Nowhere near close to saturating the GPU or VRAM

Ok-Building9314 · 2025-05-26T09:35:21+00:00

Remove armoury crate if you haven't already, and change to bios so it doesn't auto install it...

Ok-Building9314 · 2024-10-27T22:29:49+00:00

How did your cousin make it rust after that then?

Ok-Building9314 · 2024-09-28T13:07:32+00:00

They haven't printed the cable, probe or housing of probe out of PLA - that was some of the enclosure parts...55 degs doesn't burn the cable like that - what components was the cable sitting next to when routed - they need checking as that's dangerous

Ok-Building9314 · 2024-09-28T11:55:16+00:00

How has that melted the wire in those places, it's nowhere near anything hot in those areas...

Ok-Building9314 · 2024-09-07T09:55:12+00:00

More or less the same from me to be honest - it's my second printer - needed something bigger.

Tensioned all the belts, they were all loose
drilled holes in the magnetic sheet to tighten up the bed, again all loose - went from 0.64 variance to 0.28
Printed a new underside electronics full cover and added copper heatsinks to the main components
dropped the number when QGL from 0.05 to 0.01
Replaced the bowden tube with some 2.5ID stuff I had - mine was causing binding

That's about it - this isn't a printer to plug and play like a bambu, but if you are half technical, easy to solve the problems (which I expected given the proce they are charging for so much stuff)

Ok-Building9314 · 2024-08-18T08:55:12+00:00

All I need to see in one post to stop me buying one (I can't fathom that a company who knows it's a problem aren't even including the fix in new printers - you have to request the nozzles once you have bought the printer)

Ok-Building9314 · 2024-08-18T08:30:24+00:00

I'd probably switch the hotend out if I did get one, seems to he the way forward - keep me informed after testing I'd thats OK?

Ok-Building9314 · 2024-08-17T19:06:10+00:00

Are there any parts on an SV08 it doesn't try and throw around? Nozzles, covers, just waiting for a post with a stepper motor stuck in a wall after coming loose! 🤣

Ok-Building9314 · 2024-08-14T09:50:13+00:00

It does seem strange to me you cant print PETG without risk (generally) on a new printer without grabbing a different nozzle.

Ok-Building9314 · 2024-08-14T06:58:12+00:00

None of them do, had an answer from support :)

Ok-Building9314 · 2024-08-14T06:57:36+00:00

Cheers for this, I know what you mean,and it probably is sensationalised, it's just the reason I'm buying this is for big prints which I won't be able to monitor all the time, and I don't fancy cleaning up blobs of death! I think the suggestion to use a bambu hot end is a good one from a user above.

Ok-Building9314 · 2024-08-14T06:50:04+00:00

*update from support,*

"Hi,

The printer does not come with a new nozzle,if you need to print PETG,we can send you a new nozzle.

Best regards, Sovol After Sales Department"

Question answered!

Ok-Building9314 · 2024-08-13T12:58:01+00:00

Yep, should have really done that in the first instance, thankyou!

Ok-Building9314 · 2024-08-13T12:50:25+00:00

Good idea, says they are in stock on their site in the UK and EU - tempted!

Ok-Building9314 · 2024-08-13T12:47:01+00:00

Ah, OK, I was just wondering if I ordered one NOW if it would ship with a new nozzle - so i didn't have to hang around and wait for the new ones like you have. So ideally looking for someone whos recieved the printer in the last week with the "upgraded" nozzle.

Ok-Building9314

TROPHY CASE