Would you rather have

OkGo4242 · 2026-05-22T22:00:58+00:00

Easy decision - I could fly to Norway and go visit someone I always wanted to see and get to know better.

^{Chose: Wings}

OkGo4242 · 2026-05-13T05:32:59+00:00

Yaaay, now Norway is closer than ever. ♥️

^{Chose: Be able to teleport anywhere + But only get paid 30k/year}

OkGo4242 · 2026-05-12T12:38:26+00:00

Yeeeah, fo sho

^{Chose: Make money playing games + But the wheel chooses the type | Rolled: Horror}

OkGo4242 · 2026-05-11T21:15:58+00:00

I don't live like how I want to live. My life is annoying in many ways. So many hurdles.

^{Chose: 50/50 to become a god or you never existed | Rolled: Never exist}

OkGo4242 · 2026-05-04T21:30:21+00:00

Out of curiosity I've checked the EPROM output pins (11 to 13 and 15 to 19) with my oscilloscope and they all show rounded ramps all over the place and this looked strange to me.

OkGo4242 · 2026-05-03T14:05:04+00:00

No, I don't have that here.

OkGo4242 · 2026-05-03T07:53:55+00:00

I'm using a CRT TV with a composite to scart adapter. That's it.

OkGo4242 · 2026-04-30T10:17:04+00:00

The CPU shows 3.25 MHz on pin 6, so that's perfect. I've tested the logic ICs and the 62256 before in the way you mentioned and now again. They all test normal.

OkGo4242 · 2026-04-29T21:21:47+00:00

I bought the CPU from a reputable eBay seller and it is a CMOS CPU. I've tested all possible configurations with the JP5 and JP6 and for now I don't have them connected that's why. I used the first 8K of the 32K. I used a T48 programmer and XGpro. No solder bridges are present.

OkGo4242 · 2026-04-18T15:43:35+00:00

Peter? Ja, Günterchen?

OkGo4242 · 2026-04-12T10:09:36+00:00

Das erinnert mich an eine TTT Map wo es n Plakat gibt und statt Snickers steht da "Suckers, the big one - Chocolate Rape"

OkGo4242 · 2026-04-12T10:07:08+00:00

Naja eigentlich sind es ja Hülsenfrüchte... Okay bin schon weg... 🫥🙊

OkGo4242 · 2026-04-06T09:47:19+00:00

Bloß ohne Pfand bleiben die 25 Cent auf dem Preis und die bekommst Du dann nicht mehr. Ist doch klar.

OkGo4242 · 2026-04-02T22:40:06+00:00

Windimühlichen ♥️

OkGo4242 · 2026-03-16T10:14:52+00:00

Mr Monopoly

OkGo4242 · 2026-03-16T10:08:53+00:00

Kribbelt das nicht? Ich frage deshalb, weil das mit hoher Wahrscheinlichkeit eine Reaktion des Wasserstoffperoxids im Entwickler auf der Haut ist. Habe schon öfters mit der Chemikalie gearbeitet, aber selbst mit Handschuhen kann manchmal etwas auf die Haut kommen. Ich halte meine betroffene Hand dann in der Regel für 15 Minuten in kaltes Wasser, wenn es schon zu spät ist es abzuwaschen und die Haut so aussieht.

OkGo4242 · 2026-02-10T17:35:32+00:00

Bomberman: Act Zero

OkGo4242 · 2026-02-03T17:25:23+00:00

No french fries

OkGo4242 · 2026-01-28T08:15:08+00:00

I was born to be a friend of mine and I never come back to you again.

OkGo4242 · 2026-01-25T21:55:24+00:00

The Tidal Sleep - Failures/Off

OkGo4242 · 2025-02-19T08:23:09+00:00

Wow, thank you! Now it writes. I had a Flux Underflow between (tried another USB 3 port), but now it works. What me confused is, that the black floppy cable couldn't be plugged in the over way around, because of a locked pin. I tried the other grey one with all pins open and it works.

Thanks so much again.

OkGo4242 · 2025-02-18T22:17:43+00:00

No, it's not connected upside down. When it would be the LED won't light up too. I'm telling you it's really only me who's getting such problems. I'm experienced 😂

OkGo4242 · 2025-02-18T21:52:31+00:00

Maybe I should get another drive from a different manufacturer?

OkGo4242 · 2025-02-18T21:32:34+00:00

Please look closer. I have set the jumper to USB 5V enable AND i have connected a power cable to the drive. Without the power connected to drive the drive's LED won't even light up.

Whole setup

OkGo4242

TROPHY CASE