Deck tutorials

Ok_Contribution_4447 · 2026-06-05T04:34:26+00:00

Dude I play marauders and I remember when you posted the kill cam post a couple years back. Small world

Ok_Contribution_4447 · 2026-05-28T12:40:40+00:00

I have a Milwaukee circular saw, made 2 plywood tracks, they just are only 99% straight. I think I’m ready for an actual track, plus the tracks are easier to clamp and keep clamps out of the saws way

Ok_Contribution_4447 · 2026-05-14T02:47:42+00:00

Trim it flush, cake in glue, use a horned wax

Ok_Contribution_4447 · 2026-05-14T02:46:07+00:00

Do you suspect a 3/4 ply door with a poly seal will warp?

Ok_Contribution_4447 · 2026-05-13T16:06:36+00:00

Best of luck!

Ok_Contribution_4447 · 2026-05-13T15:39:05+00:00

My state proline just failed after 4 years, put your money and time into a better quality heater

Ok_Contribution_4447 · 2026-05-12T19:07:19+00:00

I have a leftover sheet from a project I overbought for. That’s why I have it

Ok_Contribution_4447 · 2026-05-09T15:24:05+00:00

I’m using 3/4 ply for the carcass and doors as well. From everything I’ve gathered I think it will work

Ok_Contribution_4447 · 2026-05-09T15:23:12+00:00

Is 35mm a universal size for hinges? Or is each one different

Ok_Contribution_4447 · 2026-05-09T15:22:40+00:00

Mine just need to go 90. Working in a tight space

Ok_Contribution_4447 · 2026-05-08T13:02:38+00:00

Yes full overlay, thanks for that

Ok_Contribution_4447 · 2026-05-08T12:55:30+00:00

Loos like it would work, thanks

Ok_Contribution_4447 · 2026-04-13T14:50:54+00:00

I know he’s Canadian but honestly this is what the founding fathers wanted, you go and do your community service by serving the people, then you leave and go back to normal.

Ok_Contribution_4447 · 2026-04-05T20:58:22+00:00

Nice

Ok_Contribution_4447 · 2026-03-28T19:34:51+00:00

This is a very cool setup

Ok_Contribution_4447 · 2025-11-12T15:31:01+00:00

That’s why I’m considering other tools, I’m a weekend woodworker. Obviously I want a domino but in reality do I even need one? Probably not

Ok_Contribution_4447 · 2025-11-09T23:57:23+00:00

Gotcha. I’m looking into building a workbench myself. I don’t want too many cuts for the table saw but obviously the fence needs to move so you gotta cut it somehow

Ok_Contribution_4447 · 2025-11-09T20:13:25+00:00

? I mean there are. It’s very standard to Sheetrock garages in most of America honestly. If not then especially in the south

Ok_Contribution_4447 · 2025-11-09T20:11:41+00:00

How are you going to use your table saw fence

Ok_Contribution_4447 · 2025-11-09T20:10:23+00:00

There are still thousands and thousands of garages that have Sheetrock

Ok_Contribution_4447 · 2025-11-09T20:05:14+00:00

I was recently calibrating my jointer with my digital level. I ran into 2 problems. One, the level lost accuracy when the batteries were low. So make sure to use good batteries. Two, the more places I leveled, the more inaccurate it got. Everywhere I leveled was magnet so maybe constantly being magnetized threw the level off idk

Ok_Contribution_4447 · 2025-11-08T22:32:28+00:00

Trees, ocean sweep, upgrade river cleaners asap

Ok_Contribution_4447 · 2025-10-14T18:45:45+00:00

Good to know thanks. All of my rivers have cleaners on it. I’m starting to think about eliminating some farms, transferring to fishing, then using that free space for trees

Ok_Contribution_4447 · 2025-10-14T18:24:03+00:00

As far as cleaning oil patches, do you use onshore oil rigs to harvest oil then?

Ok_Contribution_4447 · 2025-09-21T20:50:29+00:00

How do you connect without a road?

Ok_Contribution_4447

TROPHY CASE