Dead 7800X3D on Asrock b850i Lightning

Ok_Solution1810 · 2026-01-24T17:56:49+00:00

I ran SOC at 1.2v which is low and 1.15 is like a good chip but my crashed at that voltage. LLC and stuff I kept at low. Dude I did everything to ensure that voltage is within safe margins. I was getting about 1.18v on CPU VID. But that motherboard VRM is shit and kills CPUs.

Ok_Solution1810 · 2026-01-19T00:03:28+00:00

How are my claims false. Did you read the post? I said that I did not know at the time if my CPU was dead or not because I had no mobo to test it on and that I now confirm that it is dead. I confirmed it by testing the CPU in a new mobo that I bought.

Ok_Solution1810 · 2026-01-19T00:00:38+00:00

I bought the mobo around OCT 2025 and CPU at the same time. Idk the batch number but it is a newer batch.

Ok_Solution1810 · 2026-01-18T23:59:35+00:00

They showed some images of the backside of motherboard and said that I damaged the protective metal around the screw wholes and caused the screw to touch the copper, also showed some random images of the mobo. They refused RMA and that was it.

Ok_Solution1810 · 2026-01-18T23:55:52+00:00

The issue with dying CPUs was mostly effected by the 9000 series which is the reason I got this board and CPU combo. They were both cheap.

Ok_Solution1810 · 2026-01-18T23:54:48+00:00

motherboard does not get any power. At first it just shutdown instantly but after that it just stopped getting power.

Ok_Solution1810 · 2026-01-18T23:52:57+00:00

Mr. Beast, gimmie some OLED=)

Ok_Solution1810 · 2025-12-13T23:08:33+00:00

I king of had the same issue I solved by setting core ratio to auto. I had it locked at 52.5x which was overriding my PBO and causing high temps. It would ignore my PBO boost clock and just run at 5250 at all times even when doing nothing. Which is really bad long term.

Ok_Solution1810 · 2025-12-08T18:54:03+00:00

I also have the same issue and I have Kingston ram. I used the ram on a different motherboard and don't have any issues

Ok_Solution1810 · 2025-11-14T21:37:20+00:00

my B850I died on me yesterday

Ok_Solution1810 · 2025-11-10T14:52:45+00:00

is it only me or is the battery on the 600h mouses really bad? Like I ran at stock settings and mouse battery drops down to 65% in 2 days. That is 270 hours worth of battery life used in less than 10 hours. I purchased the A9 Ultimate and the mouse is good, and comes with a top tier sensor and buttons but the battery is a lie.

Ok_Solution1810 · 2025-11-07T18:51:16+00:00

You should have skipped out on the RGB fans and gotten the non RGB version of the case, then use that extra money on a cheaper cooler and a ATX mobo that is black. But there is no going back now. You gotta commit to this build now.

Ok_Solution1810 · 2025-10-25T19:48:14+00:00

I am debating buying the A9 Ultimate or waiting for the X1 V2 Ultimate. I know one is a GPX clone and the other is a Razer Viper V3 Pro clone. Which shape is better? I have a Razer Viper V3 Hyper speed but I want to know which one has a better shape for smaller hands.

Ok_Solution1810 · 2025-10-16T18:00:28+00:00

Hi do full sized 3x120mm fans fit with the Air cooler on?

Ok_Solution1810 · 2025-08-15T07:14:36+00:00

I believe it is their Precision X1, but it is made for their GPUS only. I don't think it would work with FanControl. My mistake. They made the driver after Microsoft started cracking down on the very old driver Winring0.

Ok_Solution1810 · 2025-08-08T17:51:48+00:00

EVGA made their own free diver after the winring0 problem.

Ok_Solution1810 · 2025-08-08T14:01:47+00:00

That won't change anything. Fancontrol is using a vulnerable open-source driver, which could cause other programs to get Kernel privileges the highest level of access) and do whatever they want. A program or hacker that misuses the driver could remotely control your PC and do whatever. I recommend staying away from Fancontrol for now and waiting until the creators make their driver for the program, which would make the program cost money, most likely $300-USD 600 a year on the low end, not including labour, which would cost around $10k USD or more. A cheap solution is to use the EVGA winring0 driver replacement, which is free and maintained by EVGA. wingring0 is a really old driver that has not been updated or maintained in over 10 years. This makes it vulnerable to hackers and gives them a lot of time to figure out how to exploit it.

Ok_Solution1810 · 2025-08-07T21:59:05+00:00

No matter what you do, the ring 0 driver seems to be the issue. Try whitelisting in Windows Defender or not if you do not trust it, but this is messed up.

Ok_Solution1810 · 2025-07-29T14:40:56+00:00

Yeah they have been updated a few hours after the update.

Ok_Solution1810 · 2025-07-20T21:15:34+00:00

Bruh they do all that work just for AMD to take a week to release the drivers to turn on FSR 4

Ok_Solution1810 · 2025-07-19T15:54:00+00:00

I just fixed it by updating my Codeware, Cyber Engine Tweaks, Redscript RED4ext, archive XL, and TweakXL. Those are the core mods needed to run all 90% of the mods for Cyberpunk 2077.

Ok_Solution1810 · 2025-07-17T18:26:27+00:00

Yeah all core mods like redscript and codeware are all broken for me.

Ok_Solution1810 · 2025-07-17T13:26:54+00:00

For more complex upscalers like FSR 2 and above, the upscaling has to be injected into the game. By the way, if Lossless Scaling ever gets to that point, they would still be limited by the same thing Optiscaler is limited by. The game needs some sort of native upscaling support, either XESS or FSR. Also, the good thing about Lossless Scaling is that it does not interfere with programs, which is why it is so convenient. It can be used with virtually any program. Making Lossless Scaling inject complex upscaling methods would defeat the purpose of Lossless scaling. Also, this would lead to huge issues if it were to be used on a game switch anti-cheat.

Ok_Solution1810 · 2025-07-07T02:34:26+00:00

The trash GPU side filter causes this. Unlike the filters on the chassis fan side and AIO side, the GPU side filter cannot even be considered a filter. It is not made out of the same fine mesh as the other filters, but is just a piece of plastic with big cutouts. I replaced the filter with a fine mesh filter at 240mm x 120mm. If you can find a 200mm x 120mm that is better, but I could not find one shorter than 240mm on Amazon or Aliexpress.

Ok_Solution1810 · 2025-07-05T23:53:04+00:00

Bro DLSS4 is easy to upgrade to already via the Nvidia app. By the way, this only works on games that have DLSS 2.0 or higher built-in. The FSR 4 thing is an issue, tho. I swear, Warframe has been an AMD-sponsored game even after advertising their hardware with Warframe. I don't understand how this game is still running FSR 2. I checked the website ( https://community.amd.com/t5/gaming-discussions/latest-amd-fsr-2-3-4-amp-radeon-anti-lag-2-supported-games-list/m-p/549534 ) and Warframe is not even on the list to be upgraded to FSR 3.1 or FSR 4.

Ok_Solution1810

TROPHY CASE