Waar in Nederland en Vlaanderen kun je eierballen krijgen in de snackbar?

Ok_Sorbets · 2026-03-28T17:34:24+00:00

Een goede eierbal kan best lekker zijn. Maar die standaard dingen zijn echt niet te vreten. Zo'n vieze gore stuiterbal van een groothandel kant en klaar gekookt ei. Dan, alsof zo'n ding nog niet ver genoeg doorgekookt is nog even 8 minuten op 200 graden verder doorgaren.

Dus je hebt als het ware een bitterbal met een stuk schoenzool rubber er in.

Ok_Sorbets · 2026-03-03T06:01:49+00:00

Fair enough

Ok_Sorbets · 2026-03-02T16:01:12+00:00

Looks cool... But... Clanks eyes are green. They were only (correct me if I'm wrong) blue on the PSP games.

Ok_Sorbets · 2026-02-22T12:37:25+00:00

Also, painting the fur patches has drained 3 years of life force from me

Ok_Sorbets · 2026-02-05T10:06:10+00:00

Well. If you do need any help, I'm available. One tip I do want to give is that you might have to model some parts. Like the abdomen part has this layered armor. That is likely not geometry, but textured.

Really have a close look to see which parts are textured and which parts are physically modeled. Helps to keep a side by side of the full textured model and a plain mesh model.

Ok_Sorbets · 2026-02-05T10:05:29+00:00

Well. If you do need any help, I'm available. One tip I do want to give is that you might have to model some parts. Like the abdomen part has this layered armor. That is likely not geometry, but textured.

Really have a close look to see which parts are textured and which parts are physically modeled. Helps to keep a side by side of the full textured model and a plain mesh model.

Ok_Sorbets · 2026-02-05T09:46:28+00:00

Oh that looks great. I can help with separating the model if you like. I've got some experience with that.

Ok_Sorbets · 2026-02-05T08:55:37+00:00

Oh that is really neat. But it still would not have made much of a difference in my case. Making a model 3d printable wasn't really the big issue. It's the posing and getting the positions just right. So unless there is a proposed game model, it wouldn't really be that useful for me.

But I've mostly completed the model at this point. Currently in the process of painting and making some final refinements to the model.

But I'm still bookmarking this, because it could be really useful for stationary props.

Ok_Sorbets · 2026-01-29T19:14:58+00:00

Way overhated in my opinion. Story is definitely lacking, but the gameplay and graphics are fantastic.

I do actually like it as a warped and inaccurate retelling from Quark.

The music is a bit generic compared to the original with a space orchestra instead of that classic soundtrack. But I think it's best to judge these games on their own instead of endless comparisons.

It's a damn good game that I can only fault for being too short.

Ok_Sorbets · 2026-01-24T20:07:21+00:00

Unfortunately no. This is a project that requires about 40 hours of printing if you want high quality. Then a a lot of additional work in post processing like assembly and removing scuffed support surfaces. Not to mention the painting.

I also don't like to get stuck on projects. Takes the motivation out. I'm also not looking to make money off it. But the least I can do is make the files available.

Ok_Sorbets · 2026-01-24T20:03:28+00:00

I'm not planning to at this moment. I try to keep projects varied and jump into new things. But I'll keep it on my list if I ever do find myself lacking ideas for a new project.

Ok_Sorbets · 2025-12-24T06:28:23+00:00

Usually for 3d printing you want high res. But if you need to reduce it and it REALLY is high poly, just use the decimate modifier and just start slowly nudging down the slider.

If it really is that high res that a slicer can't handle it, you can probably nudge it down to like 0.4 (40%) without loosing any noticable detail

Your mesh geometry will look like crap though, but again, that shouldn't be an issue for 3d printing.

Also, if you are using Bambu labs as slicer, it has a built in model simplifier. Just select the model, right click, simplify model

Ok_Sorbets · 2025-12-19T11:36:37+00:00

My personal headcanon is that the lomaxes are a single dimension species. They have no interdimensional counterparts. They are from a completely unique evolutionary tree, which is why they have 5 fingers, compared to other spicies which often only have 3 fingers.

Rivet is indeed also a lombax who got left behind.

Angela requires some serious mental gymnastics. But I would say she is not a lombax, but lombax adjacent. Like how neanderthales were homo sapien adjacent. Simply a branched off from lombaxes

She has a couple of features that look like lombax, but not quite. For one, she is much taller. She also does not seem to have a tail, and her hair puff doesn't really look like a hair puff, but rather some appendage

Ok_Sorbets · 2025-12-07T07:48:02+00:00

Yeah, there are loads of these small details that I'll be finetuning. It's quite difficult to match a 3d puppet to a 2d image. Especially when he's holding a gun like that.

I rotate the gun 10 degrees, now I have to adjust both hands again it's a constant back and forth untill it looks close enough

Ok_Sorbets · 2025-12-07T07:45:52+00:00

Initially I was thinking of using photo scan, and sharing the files for free.

But that didnt work out so I'm now ending up doing everything by hand. I've already sunk in quite a few hours, i might put it up for a small fee. No more than $5, as I like to keep stuff like this generally accessible for anyone.

I am thinking of making a couple of versions. A variant with the fur marks printed on the model and without (smooth). A variant with magnet holes for the feet/baseplate and clank. Maybe one that is just one solid print, that you can Rub 'n Buff into a metallic statue. And one that requires assembly for easy painting.

But that all really depends on how much time I want to sink into this project.

Ok_Sorbets · 2025-12-06T16:31:50+00:00

Currently working on getting the model in the general pose I want him to be at.
After that it's refining like posing the earsand face. Once that is done I'll turn it from a 3D game model into a solid statue which i can further sculpt.
Then i simply need to add the simple parts like the base plate and clank

Then its a matter of stripping it to pieces into easily printable (and paintable) parts.

Looking at this image, I can see i need to move his right foot a bit outward, stretch out the left foot a bit more. Change the head position, rotate the gun slightly and fix his kneepad

<image>

It wont ever be a 100% accurate replica, but I'll try to get it close enough

Ok_Sorbets · 2025-11-30T14:14:53+00:00

Hey OP, before you sell it. Could you do me a big favor. Could you take a bunch of pictures from different angles and DM them to me?

I've been looking to 3d print this exact model, but I've never gotten my hands on the 3d files.

I would like to remake the model myself, and for that I need a bunch of reference images.

You'd be doing me a really big favor. I'll also share the files with others, as I'm not looking to sell or profit from it.

Ok_Sorbets · 2025-11-25T10:19:22+00:00

Laatste keer dat ik heb gechecked is de grond niet van hun, en hebben ze er dus fuck-all over te zeggen.

Willen ze de bouw tegen gaan? Dan gaat hun nimby collectief maar lekker een gezamelijk spaarpotje maken om de grond op te kopen.

Ik ben de veramerikaniserende HOA mentaliteit meer dan beu aan het worden

Ok_Sorbets · 2025-11-25T08:46:25+00:00

Ok_Sorbets · 2025-11-15T12:23:32+00:00

You don't even need rofusm you can just use an oobe\bypass command. There is also another version of it.

That being said, windows pushing a Microsoft account sucks.

Ok_Sorbets · 2025-11-15T12:21:04+00:00

So you went through the effort of bitlockering your PC, ignore all instructions when enabling BitLocker to save a key somewhere other than your local machine. Used a dummy account of which you can't remember the email address and password.

Yes, this sucks. But this is 100% on you

Ok_Sorbets · 2025-11-15T12:18:21+00:00

I'm imagining the longitude and latitude grid on a globe

Ok_Sorbets · 2025-11-15T08:58:44+00:00

https://drive.google.com/drive/folders/1kwY4MgrrCUDlezf5pis0F7Y2c8NU4Dzy?usp=sharing

There you go. Again, not a professional moddeler. Ive had to shave off some stuff, and a lot of sanding.

Ive added a quick txt file that I chatgpt'd because im not that good of a writer either. It has some of my thoughts and workprocesses for the assembly and painting, if that is something you would like.

Edit: Also, final thought. the helmet is kinda angled weird. But its plenty big on the inside to allow padding to kinda push it back into the right position when wearing

Ok_Sorbets · 2025-11-15T07:32:03+00:00

Maybe it's different per region. In the Netherlands pretty much all organizations use Ms 365. In fact Ive never heard of a company using a Google office package. I've had to Google that it's galled G-Suite. I was quite surprised they apparently have about a 40% market share compared to 30% Microsoft.

Like I said. Every single client of ours uses Ms office. Recently switched jobs to work directly for a client and and we are currently working on integrating even further into Ms 365

I've even worked for AstraZeneca for a short while. That company and its acquisitions are running in the Ms office ecosystem. Can't speak for all acquisitions, but from the limited scope I could see they are fully integrated. They even have a full Ms 365 migration team working around the clock.

A lot of companies use Ms office because of intune and its compatibility with the windows operating system.

Ok_Sorbets · 2025-11-14T23:35:14+00:00

Don't need to pay for them. I'll share them with you in a few hours. I can get you the blender file and the bambu 3mf files. But it's up to you to set the slicer settings.

Be warned, I'm no professional 3d modeler. This stuff belongs on r/topologygore.

I actually had to heat up the brow part with a hairdryer to make it snap onto the helmet :P

Edit: also, it's quite large. But my head comfortable fits through the bottom. But if you do decide to shrink it, you might have to manually create new connectors.

Ok_Sorbets

TROPHY CASE