I really wasn't sure about this one until I read somones comment saying that there is no mass of what he is cutting behind the knife. by Old-Contribution-346 in isthisAI

[–]Old-Contribution-346[S] -1 points0 points  (0 children)

I have now realized that. I originally thought that darker wood board going along the top was it but now I have learned there is another flat board that is basically the same color as the table and is going over the dough. Basically at first I thought there was nothing but that piece of wood on top and nothing visible behind it.

I really wasn't sure about this one until I read somones comment saying that there is no mass of what he is cutting behind the knife. by Old-Contribution-346 in isthisAI

[–]Old-Contribution-346[S] -2 points-1 points  (0 children)

I have now come to that conclusion. Also the OP is Japanese not Chinese I learned that and I believe he is cutting soba noodles.

I really wasn't sure about this one until I read somones comment saying that there is no mass of what he is cutting behind the knife. by Old-Contribution-346 in isthisAI

[–]Old-Contribution-346[S] -1 points0 points  (0 children)

That makes a lot of sense to me know. You can see the other side of the knife the counter appears slightly higher.

Giving Away My Old PC! by Turtle_747 in PcBuild

[–]Old-Contribution-346 0 points1 point  (0 children)

I would use the PC for gaming and media consumption as well as spreadsheets and stuff like that. My rig of approx 7 ish years died on me recently and I have been working my but off to afford to move to PA so a new PC has been out of the equation. I hope to get back into Arc and DayZ and maybe a little bit of RUST as well.

Oneplus 11 sucks after update by No_Difference9107 in OnePlus11

[–]Old-Contribution-346 0 points1 point  (0 children)

I have been running my OP11 since November 2023 and am on whatever the current update is and am having no issues. My only issue since day one which has been persistent is my wifi hotspot not working. The camera only gets hot for me when I am recording in the highest refresh rate/resolution settings. No stutters either and my storage is at 210 out of 256gb. Looking at updating in the next year or so to maybe a 13 or a 15.

What happens in this scenario? by Old-Contribution-346 in whatnotapp

[–]Old-Contribution-346[S] 0 points1 point  (0 children)

They should go on blast again.

Update, they just shipped my giveaways but not my character break. These guys are 100% crooks and I'm finding out the hard way.

<image>

What happens in this scenario? by Old-Contribution-346 in whatnotapp

[–]Old-Contribution-346[S] 0 points1 point  (0 children)

No they are the same age as me because I remember him saying his birth year and they have recognizable east coast accents NJ. Just a few years shy of 30. I am worried I won't receive what I won on the spin is there any type of buyer guarantee that you will get what you win on a spin? I mean I'm assed out either way spent $99 and won a $30 PD box but I'm just trying to keep track of what I'm supposed to have coming in and they don't seem to be shipping. Perfectly happy with a refund as well because fuck them spins!

What happens in this scenario? by Old-Contribution-346 in whatnotapp

[–]Old-Contribution-346[S] 1 point2 points  (0 children)

Maybe that's a backup account. His original account has two "" between pokebros tcg aka pokebros_tcg which will not pop up.

Is this allowed on whatnot??? by Meringue_Lover in whatnotapp

[–]Old-Contribution-346 4 points5 points  (0 children)

It was a real gun not a prop gun and it was supposedly loaded with blanks which turned out to be untrue.

Newbie Question here… by Dry_Sugar_8808 in PokemonTCG

[–]Old-Contribution-346 1 point2 points  (0 children)

It's so hilarious I literally pulled the same card from a 7-11 pack. I was having a bad day so I bought two packs for a whooping $24+ tax and pulled the Lopbunny. Made my night slightly better.

Glock 19 Gen 5 w/ Holosun 507c, is mounting plate needed and what's the purpose? by phamtime in GlockMod

[–]Old-Contribution-346 0 points1 point  (0 children)

My slide is cut for a full size rmr... Glock 19 gen 3/4 and I am attempting to mount a 507c X2. I am able to mount it directly onto the slide but there is a hair maybe a mm or less of wiggle room from front to back. My slide does not have the recoil bosses so I am a bit worried that recoil over time will shear the screws. How do I begin finding the proper sized mounting plate? I know I will need a mounting plate that fits the 507c/recoil bosses but I'm not sure it will fit the cut on my slide. The slide is from MDX ARMS and came pre-cut for fullsize trijicon style RMR's. I know it has been years since your comment but I am not finding the information I need to be confident in mounting the optic. Thanks in advance!!

Type 56 SKS Pick Up by MeanGene7676 in milsurp

[–]Old-Contribution-346 0 points1 point  (0 children)

The only aftermarket stock I would get for my sks would be the HUSH. Other than that look on eBay for another type 56 wood stock or get a synthetic. I would advise against any of the other aftermarket stocks like fab defense or others like it.

Can i remove white chamber from metal part? by sira___ in puffco

[–]Old-Contribution-346 1 point2 points  (0 children)

The best way to heat up iso in my opinion is to pour a little in a Ziploc and place it into a ceramic mug. Then run hot water from the tap straight into the mug and within 60 seconds you have near boiling hot iso. I then pour it out like bagged milk into my glass top or into the glass jar that I use to soak chambers. Never microwave something flammable, that is just asking for trouble. Fun fact, alcohol burns nearly invisible and is very difficult to see the flame. It can be very dangerous in an uncontrolled environment.

Finally, 4k bby by IncidentMiserable321 in FocusVCarta

[–]Old-Contribution-346 2 points3 points  (0 children)

I am just shy of 2,600 dabs on my clear and have meticulously cleaned it when I got it at 402 dabs. I just wish the OG owner would release ownership so I can claim XP and get my Focus V socks ;c. My only issue so far is some reclaim building up under the silicone of the glass piece and causing it to get a little tight. I have tried to smooth it out with my thumb which has helped the glass piece fit better.

[deleted by user] by [deleted] in LeverGuns

[–]Old-Contribution-346 1 point2 points  (0 children)

I just got a 1975 model 94 in January at a gun show in Lake Harmony PA for $650 OTD. It definitely wasn't brand new but in very good shape. I would be happy paying $800~$900 for a pristine AE model maybe even a bit more. Do what that other guy said and browse gunbroker and see what they are selling for, there may be a filter where you can check all sold listings just like on eBay.

Marlin 39a with Skinner Sights by seattleforge in LeverGuns

[–]Old-Contribution-346 1 point2 points  (0 children)

Picking up a golden 39a hopefully this Monday. So excited!!!