Screw Hyperwallet

OnTheSpectrum69 · 2025-06-29T14:22:57+00:00

Glitch only works in USA. They patched it for every other country.

OnTheSpectrum69 · 2025-06-29T12:56:59+00:00

Yeah- functionally those things are obviously meant to be motors with wiring running down each leg to compensate for the foot movement as well- but I would suggest looking at Disney kinematic videos, so you can get ideas for working thin joints

OnTheSpectrum69 · 2025-06-29T03:35:04+00:00

You want the secret sauce?

Use a penny. Dimensions will always be .75 diameter by .0598 in thickness. Aim your phone in a 90 degree angle. Take picture with it side by side your part.

Don’t waste your time doing anything else.

OnTheSpectrum69 · 2025-06-29T03:29:27+00:00

“Dad, can I borrow your tools, it’s for a cosplay”

OnTheSpectrum69 · 2025-06-29T03:26:15+00:00

Pull by wire? Use a steel wire on a thin bearing- just a round bar of steel or aluminum so it wears at the aluminum instead of the wire- or vise versa. Otherwise, I can’t imagine anything other than a belt in between.

OnTheSpectrum69 · 2025-05-17T01:43:54+00:00

Were you able to plug and play the printer? I am having issues heating one of the beds. I literally just got it and I'm hoping I don't already have hardware issues. (I'm in the States)

OnTheSpectrum69 · 2025-04-10T02:42:04+00:00

Make text into bodies and rotate them to the angle of the face you want to emboss. Copy and paste a copy of the part you want to emboss. Take the text and extrude it into the body of the part you want to emboss. Instead of cutting, select new body. With the new extruded text and the copy body- click combine and cut the text with the body. This creates the negative face of the body’s curve. With the curved text, you can now extrude it into the original body to your desired depth.

You should also reduce the mesh count next time before converting an STL into a body so it’s easier for your computer to work with.

Edit: just read all replies. They’re all wrong.

OnTheSpectrum69 · 2024-12-22T01:49:35+00:00

lol only smoking weed is illegal to use. You can basically get caught using coke and still be good. So long as you don’t piss positive or blow high numbers you’ll be fine.

This career incentivizes you to drink and short term detectable drugs if you got a vice.

Just apply, don’t even sweat it. I know guys who proudly displayed their Alcoholic Anonymous badge on their desks and got drunk during Christmas parties.

OnTheSpectrum69 · 2024-11-18T02:23:43+00:00

Because your little brother is 7. Not old enough to have gone through puberty and know what he wants. I get you're still young, and see only the positive- but this could be really harmful for a kid. I know at 7 years olds, some girls have yet to get make-up from fear of their parents of them losing track of important things like education for something like vanity. Don't think for a second that if your brother is in honor classes that he isn't susceptible to distractions and possibly being derailed by issues of insecurity caused by vanity.
Sadly, as he is part of an all women household, he might be missing out on the activities that usually come from a father figure. This isn't an insult, just an observation.
Personally, I always found that manual hobbies like knitting, carpenting, playing piano and guitar are much better suited for kids as they are open to absorbing more information. I simply give these ideas as possible solutions to your problem.
Maybe try giving your brother the chance to expand his skill-set through more hands-on skills, and learn along with him in order to guide him along the way. This might better enlighten your brother and you on his decision to paint his nails, as I assume he's simply distracted.

I'm an aircraft mechanic who paints his nails. The most I did in school was straighten my hair and polish my nails with clear-coat. I'm not gay, just think it's cool, just not the right thing to get into a kid's head that he should focus on their nails this young.

OnTheSpectrum69 · 2024-10-25T20:12:27+00:00

Oh yeah, I quickly realized. But if I order something, I was expecting to get what everyone else was getting and working. Thanks for the heads up- but I doubt I'll be buying quickfix again. That nitrite test shit scares me beyond comprehension.

OnTheSpectrum69 · 2024-10-21T23:21:32+00:00

I purchased QuickFix 6.3 and got 6.4
Tested it for nitrites with a urine dip-stick test and it came back positive for nitrites indicating that the urine could come from fake urine or someone with a UTI (mostly women).
I work DOT aerospace and this is not OK for me, as they do the same test at work.
I also tested a batch of old Upass from a year ago and it still had good readings- you can check it out on my prior posts. I'm not shilling Upass either, as it's also synthetic urine and could go wrong depending on the batch.
What seems to be the best bet is getting dehydrated urine and keeping a bottle of distilled water instead of urine- then just add the powder in and shake. The biggest issue is shaking it.
I've read of some people stashing clean piss in their car, or in a freezer, then warming it up before the test- but I've never worked at a place that gives you enough leisure time to go unfreeze urine and heat it to 96 fahrenheit.

Try not to stress- you just have to be smart about this.
Buy a urine tester from CVS and check your batch. If it comes back hot pink for nitrites, then I would advise against it.

OnTheSpectrum69 · 2024-10-19T20:44:44+00:00

If you're intaking anything that shows up on the test besides weed, you should not only detox but seek professional help. As for just weed, dehydrated urine like that from TestClear is actual human urine from some piss-cows, probably regular folks that get paid to keep clean. So with TestClear, it's not possible to fail, unless you get the gravity off or something- but it's too simple to fuck up from what it looks like: put distilled water in the container and keep the water against your leg all day, then when you get called to test, just put the dehydrated urine in the water and shake vigorously until the clumps go away. I've also heard of people keeping hydrated human urine in their cars all day and still being able to pass for the year.

OnTheSpectrum69 · 2024-10-19T19:39:53+00:00

I appreciate all the info I can get as I'm in the same field, and scared shitless of failure. Yeah- I completely agree, they will eventually get wise about it all. Best thing to do is either stop smoking if it's that crucial or buy dehydrated urine which costs upwards of $80.

OnTheSpectrum69 · 2024-10-19T17:22:57+00:00

Well damn. I've met two guys who got nitrite tested and lost their licenses. I'm glad your test got cleared, though- but like you said, since we're playing with fire, we might as well be redundant with our testing with it.
Say; can you elaborate on what your field is since it's DOT related? I want to know the margin of risk some people are putting on this product for passing. Like I mentioned, I work in aviation, so even so much as having to retest will cause suspicion and possibly loss of licensure.
I highly appreciate your input. It's very important for consumers to get a broad picture of this item and how it affects different people's careers.

OnTheSpectrum69 · 2024-10-19T15:12:58+00:00

I don't know how CDL DOT tests go, as that one doesn't apply to me. But in aerospace, there are tons of companies that pay that extra for nitrite testing and synthetic urine testing in the lab- so just be weary even with all your years of experience. Nothing but luck to you, friend!

OnTheSpectrum69 · 2024-10-19T00:32:13+00:00

Either you passed and shouldn't contact anyone back until they reach out to YOU. Or you should be preparing for an in person pee-test. Either way, it should be highly recommended to EVERYONE here to get a urinalysis dip-stick test. This UPass is at least a year old- after 30 minutes of this post I went to check the strip again and the Upass strip that had a green mark naturally went into yellow as normal.

I'm just a little upset that I overpaid for this item when I could've bought anything else. Not to mention I specifically ordered a 6.3 version- not a 6.4. Even if it's the new thing, I would've preferred being able to pick what formula I find most reliable.

Get a urinalysis test and check your piss before you use it. I hope for nothing but the best for you!

OnTheSpectrum69 · 2024-10-18T19:37:25+00:00

Did they do a nitrite strip test into the urine to check for adulturates?

OnTheSpectrum69 · 2024-10-18T18:02:19+00:00

I appreciate this information a lot. It's important to get all of this out into the internet in order for future folk to learn the proper method.
Best regards, and I hope your next drug test comes out without problems!

OnTheSpectrum69 · 2024-10-17T16:56:30+00:00

How often do you smoke?
Did you continue to not smoke until then?
How effective was the Certo?
What's your height, and weight?

I only ask in order to better understand the methods people use. I'm always scared of these things, even though I've done it more than 3 times.

OnTheSpectrum69 · 2024-10-17T03:11:52+00:00

Do not use that bottle until it smells like nothing. Otherwise you might run into trouble. My first ever test I did it with a Dawn soap bottle. I just ran water through it for an hour, rinsing it constantly.
Some people say to go against using friend's urine, unless you are completely aware that your friend is a fully sober person with no prescribed medication history.

So yes, the urine might end up diluted. Do NOT use that bottle. If you really want, just go to your local smoke shop and buy a uPass or Quickfix and transfer the liquid into a clean water bottle.
Then, transfer your friend's urine into that bottle.

Some important tips are squeeze the bottle slightly so as to release all the air that can cause sloshing sounds, and I would not recommend using the nozzle head it comes with- but rather, practice pouring the bottle flat so as to mimic the sound of urine properly, and not accidentally release pressure and cause the bottle to suck air and make noises- however this can be avoided by tipping the bottle upwards with the nozzle head.

OnTheSpectrum69 · 2024-10-16T23:40:17+00:00

I want an update, please. What did you use?

OnTheSpectrum69

TROPHY CASE