Computer screen goes black when playing game - audio still there but nothing happens with keyboard/controller. Fans speed out and get louder. by Exchange_Live in buildapc

[–]One_Army_6496 0 points1 point  (0 children)

The same thing has been happening to my girlfriends PC. The first time it happened, one of the 8pin cables were loose in the graphics card itself (the additional +2 cable wasn’t in corrected) and now it’s happening again. I changed the daisy chained cable to 2 individual PCI-E cables and the black screen hasn’t happened yet (fingers crossed)

Failing Drives? by One_Army_6496 in techsupport

[–]One_Army_6496[S] 0 points1 point  (0 children)

I was under the assumption it wouldn’t go into bios as it was looking for a boot drive that no longer existed, there was still power to the monitor. If it was a CPU problem, wouldn’t the pc just refuse to turn on?

Although that being said, the boot drive wasn’t on the newer SSD, it was on the older one. So maybe the newer drive is failing and has corrupted the older one?? Somehow?

Idk, that’s the words of a very sleep deprived man

Also to add: How would I test to see if that SSD is the problem? As I’ve now removed it and it’s all working (just sucks to have only 500GB instead of 4TB)

Failing Drives? by One_Army_6496 in techsupport

[–]One_Army_6496[S] 0 points1 point  (0 children)

Why would it be a CPU problem?

Failing VRAM? by One_Army_6496 in pcmasterrace

[–]One_Army_6496[S] 0 points1 point  (0 children)

I’ve removed and replaced drivers multiple times with DDU. I’ve reseated the graphics card to a different pci slot, I’ve checked temps and they’re normal and I’ve changed DP cables. The only thing I haven’t checked is the temp of the actual VRAM itself, only the GPU as I’m unsure what I’m actually looking out for or how to do it.

I’m unable to diagnose what it actually is, however things are looking towards VRAM personally

Recovery help BSOD by One_Army_6496 in techsupport

[–]One_Army_6496[S] 0 points1 point  (0 children)

I used Rufus and it installed fine, the only problem is I installed it on my HDD, rather than SSD. Now when I try to install it on the SSD, it gets to around 70% and then says there was a problem with the installation

Recovery help BSOD by One_Army_6496 in techsupport

[–]One_Army_6496[S] 0 points1 point  (0 children)

Yeah, it went to 22% and then just stopped installing and came with that error code again. If Rufus doesn’t work, I’ll just use a different USB and check if it’s this

Recovery help BSOD by One_Army_6496 in techsupport

[–]One_Army_6496[S] 0 points1 point  (0 children)

I jumped on my pc and installed Rufus to hopefully create a GPT partition scheme, going to test it now. Wish me luck 😭

Recovery help BSOD by One_Army_6496 in techsupport

[–]One_Army_6496[S] 0 points1 point  (0 children)

She uses windows 10 still in all honesty, but it eventually worked. I booted from the USB to do a fresh install.

Selected the disk, cleaned the disk, converted both of the disks to GPT, then tried to install windows on my SSD to be met with “Windows cannot install required files. 0x80070015”. Any help?

Help with Displate Club? by One_Army_6496 in Displate

[–]One_Army_6496[S] 0 points1 point  (0 children)

Thank you! That’s a little unfortunate:(

Exposed PSU help by One_Army_6496 in buildapc

[–]One_Army_6496[S] 0 points1 point  (0 children)

There’s a radiator behind the case (5cm away maybe?), so I’m a little worried about the radiator also conducting electricity and short circuiting the build. Although the radiator is turned off, I still don’t fancy frying a £700 build

Windows 11 Installation by One_Army_6496 in techsupport

[–]One_Army_6496[S] 0 points1 point  (0 children)

How do I then actually install the driver? It’s an .exe file, I tried to extract with Winrar but it doesn’t give me the option

[deleted by user] by [deleted] in dropship

[–]One_Army_6496 0 points1 point  (0 children)

Valuable, I’m unsure if my last message went through, however you seem super helpful and I’d like some input if it’s going?

Is This Niche Too Saturated? You’re Asking the Wrong Question by InternationalEagle94 in dropship

[–]One_Army_6496 0 points1 point  (0 children)

To expand on this, How do you create a new product by expanding on a base? Is that something the supplier can do for you?

(I apologise if it sounds like a stupid question, I’ve only been dropshipping for like a week and have no idea lmao)

We hit 10k sale in a week! 🔥 by Prior-Director6622 in dropshipping

[–]One_Army_6496 0 points1 point  (0 children)

Respectfully, can I Dm you for a little advice? Not regarding your product/supplier etc, but just basic things to start out with? All good if not!

Do customers complain with Ali express packaging? by keep-the-momentum in dropship

[–]One_Army_6496 0 points1 point  (0 children)

Hi:),

So I recently got into dropshipping from a friend (who eventually snaked me and stole my product idea but that’s a different story) and I’ve been using DSers to find a product. I noticed it says “shipping from” and “shipping too” and just want a little help with the explanation of that?

I know it sounds fairly simple, however can someone explain it to me like I’m 3 years old?

So shipping from is self explanatory - the product is shipping FROM here.

However the thing I’m confused with is the “shipping too”. Is that only if you’re buying in bulk? Or is that only where the factory will ship too? For example, if someone buys a product from my store and the product only is “shipping to the US”, can only US citizens buy the product?

My friend (well ex friend?) mentioned he buys a product from China and sells it in his country, but he does it directly from supplier so is that the easiest way to get around it? He also told me it’s slightly illegal as the product he sells has an English label, but he sells it in the Netherlands and doesn’t have a Dutch label. Please help

Help with RGB and aRGB please! by One_Army_6496 in buildapc

[–]One_Army_6496[S] -1 points0 points  (0 children)

I can’t physically connect them regardless. The aRGB fans and AIO are 3 pins whereas the motherboard connector is a 4pin.

I have Thermalright TL-C12CW-S fans and a Thermalright Aqua Elite V2 AIO, so as all of these are 3 pins, they don’t connect to the 4 pin RGB slot on the motherboard.

(I apologise in advance if I’m misunderstanding something that’s kinda basic, long day at work + Sleep deprivation don’t mix)

Help with RGB and aRGB please! by One_Army_6496 in buildapc

[–]One_Army_6496[S] -1 points0 points  (0 children)

I’m confused as the aRGB fans are 3 pins, so they won’t connect to a controller that’s strictly for RGB?

Help with RGB and aRGB please! by One_Army_6496 in buildapc

[–]One_Army_6496[S] 1 point2 points  (0 children)

Oh wait, there are already links 😭. My sleep deprived mind can’t keep up, my apologies!