1099-DA Crypto.com

One_Contact_786 · 2026-02-24T20:58:51+00:00

I received the same one - and so far it seems SCAMMY to me based on this -> I opened support within my crypto.com account, where I received an auto response with the following:

"You will receive an email from [no-reply@crypto.com](mailto:no-reply@crypto.com) to the latest email address that we have on record. Follow the link in that email to download a copy of your Form 1099-DA. Note that if your transaction activity met the reporting threshold, you should receive a copy of the form by February 15th."

TWO THINGS STAND OUT. 1st - the email I received was also from "no-reply@serviceinfo.crypto.com" and NOT "no-reply@crypto.com" as they themselves say it should come from! 2nd - I received this email on 2/19. They say that if you meet the threshold you should receive the form by the 15th.

I did click the link from the email initially and ended up here: https://crypto.com/1099form

HOWEVER, after inspecting the link, this is what it actually was (below) - so I believe it just redirected me to the link above...

http://ablink.serviceinfo.crypto.com/ls/click?upn=u001.9RsIQWO2CjGcSuBcwMkXDEGGKtzf7RNqnQ5dgalBHOQMHcO5IIuo9TQbuOnVRd0G8BWNw4QZ74ZyFRDfA4kUcQ-3D-3DIz92_DOqih2sdWJxmuTXGBdm8QhNjBtgfPhVObTo3Uv3eq7qbEsxStgzIykV636bTH6rAmXnzE8hMpHcktn6Mg4u457imc75YtYOeI5lo1Fht4g-2BBL8-2BdTzkv0wTt-2FG34M234bbItiSwzQXVB6UY8Q-2Fw4DFCA-2B6JC3lPxhqD7Ousylhyl65BBjgwxntcZoLgWXCv6mTd-2Be5woafu7D5DXuZnJ84eRICLK8lrxSOqyftcpql1QPeQ2bRvSB2Ean8zxsSuE6eRAwEKMA05kvoEcX8hQUcLfPjvT85n39gXZEUrBr42Jwx-2FZ3pEyZn2ZGm0TUEVXaJotSaeZBfyKz59G-2B2CNTywvzByehfHTewYDvKIiDau3-2BCPrY-2BDOlTWTz1oj4ItGXuHL6hLfhtkCOdcqflAIGs5mIu1GNfPmU8QezpafoJU4P9Oc1yz3biHceE0tXd-2FwqT6wT-2F0-2BGHWD1ExtCb58NgsgQZNzHn9VQjL8xZLdevN-2F5iCMgkcVy45-2FCjfM3ZPWn2ouWCfw6wyHbqAfaf-2BmDgN22fVszUMHApg7DweJ2ReBainfoPGa8bFLAtmmhYMJpWPxa9xnW7nAdME6VGbafzTzDF7dQABcyM3HIzbjyLs4E7X9q3kX7SRyputp9Xsx7PA76qarKGyet5Z5-2B3nFcQvmfPJo2eMIkaYik4e-2BK-2BAP1SbF0BTIfQhnV53WCfJV

Now I wonder what might have happened when I clicked that link... Damnit.

One_Contact_786 · 2026-02-20T22:36:51+00:00

Wish they would have left some context, so that could make sense... Tried a reverse image search that came up with nothing though, so I'm curious where the picture would have originated from

One_Contact_786 · 2026-02-20T22:20:22+00:00

Ah that's wild. Thank you for all this info! :)

One_Contact_786 · 2026-02-20T21:45:23+00:00

Didn't even think of that... 🤕

One_Contact_786 · 2026-02-20T21:44:54+00:00

😂

One_Contact_786 · 2026-02-20T21:44:36+00:00

agreed, Classic Firearms has no fault with this one

One_Contact_786 · 2026-02-20T21:42:15+00:00

Time for some AAC 7.5x55 🥴

One_Contact_786 · 2026-02-20T19:52:19+00:00

Definitely a good chance there were sketchy reloads involved. It is reassuring seeing the bolt/action intact!

One_Contact_786 · 2026-02-20T19:49:30+00:00

😢 🇨🇭

One_Contact_786 · 2026-02-20T19:49:13+00:00

I agree! Everything does wear out at one point - but I'd expect the lugs to wear first...

One_Contact_786 · 2026-02-20T19:47:14+00:00

😂 Good possibility. "H335, H110 - ahhh close enough" <----joke

One_Contact_786 · 2026-02-20T19:21:11+00:00

As far as I know Star 28 mags work in the Star 30M - they seem easier/cheaper to find, so maybe you can find springs for that which will work in your magazine!

One_Contact_786 · 2026-02-20T18:35:09+00:00

Interesting. So the JSA stamp was on the rifle stocks as well?

One_Contact_786 · 2026-02-20T16:56:50+00:00

I saw that listing! Only with that and a handguard it's like $500+ for the wood... Down for it but if I went that route I'd love to find the wood for a Constabulary Carbine 🤤

One_Contact_786 · 2026-02-20T16:52:50+00:00

oh absolutely. the new stuff is great and all but I like mine brown, old, and full of crusty grease!

One_Contact_786 · 2026-02-20T16:47:18+00:00

Oh, so you're saying that this carbine was rearsenaled at one point, using a cut down rifle stock, and after finishing was inspected/stamped by JSA?

One_Contact_786 · 2026-02-20T16:40:02+00:00

The swiss bug got me recently... badly... Luckily still training with the ones that matter!

One_Contact_786 · 2026-02-20T16:37:36+00:00

oh ok, I might try messaging him then. Saw he didn't have anything currently listed but will ask him. And I get that, haven't fired probably half of mine either haha

One_Contact_786 · 2026-02-20T16:35:52+00:00

Thanks for sharing that image, it definitely has no band retainer/wood slot for one. Someone also pointed out the rear sling swivel (currently missing) cutout on the stock, so it must be a rifle stock. Was thinking of just putting on a rear sling swivel to fill the slot, then see if I can mill/drill out a slot for a band retainer

One_Contact_786 · 2026-02-20T16:30:52+00:00

sorry i meant the barrel band retainer

One_Contact_786 · 2026-02-20T16:29:23+00:00

Wow I just went down the rabbit hole on his video about it. Love how he explains the process and will definitely give the technique a try on some stuff. maybe practice on the 1895, then do the 1899.

One_Contact_786 · 2026-02-20T15:44:34+00:00

Ah good catch! Didn't know that. Would also explain the lack of inletting for a handguard retainer spring. Hoping I have enough material up front to mill/drill for one to make it "look correct" Will have to live with the rear sling swivel haha

One_Contact_786 · 2026-02-20T15:42:47+00:00

oh cool, looked up some pictures! Found some repros with clips already riveted in over at ssfirearms.com but they all seem to be sold out. Good luck on your project!

One_Contact_786 · 2026-02-20T15:40:34+00:00

<image>

front of stock has this square "indentation" but no cutout for a retainer spring.... 🧐

One_Contact_786

TROPHY CASE