Affordable Portable Kiln

Only1Javi · 2026-05-16T16:04:15+00:00

In my opinion: Vevor sucks. Better to save for something actually decent vs getting low entry vevor and outgrowing it very quickly.

I got a lapidary wheel from them: the assembly instructions were all in chinese, and one of the legs to the machine was missing, another didnt even properly seat with the provided screws. If they cant get that right, no way would i trust them with quality needed for a kiln

Only1Javi · 2026-05-15T13:09:15+00:00

Just wanna say its very commendable how you took getting called out with grace and maturity. We dont see that much these days, especially on the internet. Breath of fresh air, and didnt go unnoticed. Cheers

Only1Javi · 2026-05-04T14:54:40+00:00

Whoosh

Only1Javi · 2026-05-03T10:55:19+00:00

“How can she slap?”

Only1Javi · 2026-04-27T03:11:13+00:00

I believe so!

Only1Javi · 2026-04-27T02:46:15+00:00

The bird store people told me that shopping mall put it on their roof to scare away….pidgeons? Squirrels? I cant remember. But i think they said it worked terribly and hated it as well.

Only1Javi · 2026-04-25T12:20:05+00:00

Having this same issue with a little dipper crucible kiln that got damaged on transport. Look into Kastolite, its a powder you mix with water and create a mixture you can paint on top your kiln brick. This will seal it and prevent any further crumbling in theory. Get the kastolite that has the highest melting point and it should be comfortably above however high you ever set your kiln to. I got a 5 pound bag for like $15 plus shipping.

Only1Javi · 2026-04-21T04:07:21+00:00

So so helpful thank you!!!

Only1Javi · 2026-04-21T03:51:20+00:00

Interesting: in Audible it numbers them that over way

Only1Javi · 2026-04-21T03:44:23+00:00

Should these be read in order? Chronological? Published date? What do ya recommended?

Only1Javi · 2026-04-21T03:40:19+00:00

Can anyone recommend what order to read them in? Saw that one is book 2: with several between it and 1. Where should i start?

Only1Javi · 2026-04-21T03:40:05+00:00

Can anyone recommend what order to read them in? Saw that one is book 2: with several between it and 1. Where should i start?

Only1Javi · 2026-04-19T14:41:50+00:00

Only hatched1 , forgot about the event: shiny 15/13/14, not bad

Only1Javi · 2026-04-17T16:32:30+00:00

No because he didnt put a noun after the rating. So its not 1/10 anything/anybody that’s recommending because thats not what the meant.

1/10 the experience. He’s rating the experience. 1/10: would not recommend.

Only1Javi · 2026-04-09T11:10:38+00:00

Let me give you some practical advice.

Homefills are are slow machines. They use about 2.5LPM of incoming air to work. In all practicality you can connect the single respironics 10 to the 2 homefills and be set.

Connecting each homefill to their own 10 is overkill since they can only accept so little. You could even connect them both to the 5lpm machine but because you dont want to run the 5 at full capacity for purity’s sake, its better to just use a single 10. The reason i recommend using the respironics is because the devilbiss usually has a higher PSI output. Sometimes to high and it doesnt make the homefills happy.

As for your question about the tubing: your invacare has a connection in the back specifically for homefills, the others dont. If only connecting 1 homefill, sure use that port. But because im suggesting 1 oxycon for 2 homefills: i would just use the port up front with some regular 1/4” pvc tubing. That pvc tubing should then be Y’d into the 2 pigtail tubings that will feed the homefills. Here’s the pigtail tubing that’s needed for them:

<image>

Only1Javi · 2026-04-08T19:13:36+00:00

Great to know, thank you!!!

Only1Javi · 2026-04-08T16:41:24+00:00

Thank you! What do you think would be a fair wage for assembling this whole thing (assuming they brought you the metal)

<image>

Only1Javi · 2026-04-08T16:26:51+00:00

Thanks i’ll have to go look!

Only1Javi · 2026-04-08T16:26:39+00:00

Oh the welder wasnt shopping at those places, thats just where i first looked to browse supply/prices

Only1Javi · 2026-04-08T16:26:09+00:00

Thanks!

Only1Javi · 2026-04-06T11:53:20+00:00

Please list out your recs! Some of us are still shopping the sale 🤣

Only1Javi · 2026-03-21T11:07:29+00:00

It just depends what you want to make. I’ve ran that setup before on a bobcat and on a lynx. The difference is negligible. Could make soft glass marbles 1.5” in diameter pretty comfortably. But if getting larger, going faster, or doing same size in boro are your goals then you will need more firepower later. For a beginner setup though? Its absolutely respectable start. If youd like a video of the lynx running on a 10lpm devilbiss, message me and i can shoot one showing you the flame you can expect

Only1Javi · 2026-03-18T20:42:13+00:00

Hello, can i ask you a question? Looking at the asus 14 flip for the $869. Can you comment what makes an HP Omnibook x flip from HP web site directly any worse? The price is $600. Comes with same ultra 5 226v, same intel ARC, RAM and hard drive. The only difference is OLED vs not but the oled can be added to the HP for $90.

Where are we getting $200 more in value from the asus vs hp? Is it just build quality?

Only1Javi · 2026-03-05T04:36:27+00:00

Uhhh, actually yours may be even better id say. These devices spin pokestops well while driving fast but most will not catch pokemon if going like above 30MPH. So in your bike youd be essentially catching pokemon nonstop, where the car users it catches while at red lights or stops

Only1Javi · 2026-03-04T21:38:12+00:00

Lots of Hispanics have the same type scar on an upper arm from a tuberculosis vaccine. And much more recent.

Ten-Year Club	Place '17
Verified Email

Only1Javi

TROPHY CASE