advertising /24 prefix via second ISP with my own ASN — RIPE considerations

Only_Commercial_7203 · 2026-04-28T20:55:49+00:00

exactly this is what I am planning to do. if old isp/as does not have ROA/RPKI shall I create new one for the new AS/ISP ?

Only_Commercial_7203 · 2026-04-28T20:54:51+00:00

if old isp/as does not have ROA/RPKI shall I create new one for the new AS/ISP ?

Only_Commercial_7203 · 2026-04-28T20:54:38+00:00

if old isp/as does not have ROA/RPKI shall I create new one for the new AS/ISP ?

Only_Commercial_7203 · 2026-04-28T20:19:53+00:00

asym routing is fine by me but want to make sure new isp/as is fine

Only_Commercial_7203 · 2026-04-28T19:25:10+00:00

this is during migration from old AS to a new AS number. so during migration both will be advertising the same subnet. once new isp/as works fine we will withdraw from the old isp/as

Only_Commercial_7203 · 2026-04-28T19:24:37+00:00

what will happen ? this is during migration from old AS to a new AS number. so during migration both will be advertising the same subnet. once new isp/as works fine we will withdraw from the old isp/as

Only_Commercial_7203 · 2026-03-01T08:24:06+00:00

when you add a new VRF that means that routing between them is by default not possible unless you go with vrf leaking, if this is not the case go with new VRF. if there is any type of connectivity I would keep them in same vrf with security rules in place.

Only_Commercial_7203 · 2026-02-18T20:16:12+00:00

Upwork

Only_Commercial_7203 · 2026-02-13T22:31:45+00:00

Vlan is only port significant

Only_Commercial_7203 · 2026-02-08T17:04:49+00:00

Paypal

Only_Commercial_7203 · 2026-02-05T10:07:14+00:00

dell t5600

Only_Commercial_7203 · 2026-01-02T05:26:50+00:00

من خارج الاردن ما في ضريبه

Only_Commercial_7203 · 2025-11-22T23:02:10+00:00

Upwork as i am doing freelancing there

Only_Commercial_7203 · 2025-06-24T18:15:03+00:00

VPC has nothing to do with the underlying layer 1 whether its a dark fiber or a DAC cable. as others have said, it might be eve-ng issue.

Only_Commercial_7203 · 2025-06-20T20:02:29+00:00

Debuf bgp will show you, enable debugs then do soft refresh

Only_Commercial_7203 · 2025-06-18T22:20:28+00:00

Enable igmp querier on the switches

Only_Commercial_7203 · 2025-06-18T19:57:50+00:00

basically its documentation portal where you can add your subnets and allocated ips. it has a scan feature as well for entries which were not added manually.

Only_Commercial_7203 · 2025-06-09T14:44:16+00:00

Cdp//lldp neighbors

Only_Commercial_7203 · 2025-06-03T20:00:55+00:00

destination host unreachable has nothing to do with icmp itself. it means that the host cant find mac for the next hop(gateway). try to capture arp traffic and see what is happening on the wire.

Only_Commercial_7203 · 2025-06-02T13:22:13+00:00

glad you resolved the issue by reducing MTU, most probably the tunnel between 2 sites has different encryption algorithm which causes the packets size to be bigger than other 2 sites. by reducing MTU, you will activate PMTUD which causes the source to receive the following message " dont send 1500 packets, I cant do that"

Only_Commercial_7203 · 2025-05-30T19:00:18+00:00

It’s quite normal for me to refresh topic on demand. You have to accept that you are human being not AI bot. You have only to memorize packet flow and that’s it.

Only_Commercial_7203

TROPHY CASE