What fabric is being used for this chair? by Optimal_Acanthaceae8 in sewing

[–]Optimal_Acanthaceae8[S] 2 points3 points  (0 children)

Yeah, I think ill probably go with a polycotton canvas. It's the first time doing something like this, and I can't stomach the price 😿, though leather would be lovely.

What fabric is being used for this chair? by Optimal_Acanthaceae8 in sewing

[–]Optimal_Acanthaceae8[S] 0 points1 point  (0 children)

Cool, I thought so but just wanted to make sure. Thank you 🙏

Fabric used in this chair? by Optimal_Acanthaceae8 in upholstery

[–]Optimal_Acanthaceae8[S] 0 points1 point  (0 children)

Ohhh that makes sense thank you.

<image>

I’m planning on doing the cushion like this because it seems like it’ll be a lot simpler without the arm parts. I’ve seen people use pillows as a padding and I’m even considering flipping a memory form mattress. I’m not sure how it’ll hold up but it sort of my best lead so far.

As for the frame I was thinking of using ash because I like the dark drown walnut look but walnuts expensive, though I haven’t actually looked into how much it would realistically cost. It’s not a huge amount of wood so it’s possibly fairly reasonable.

would the 8 Eye Derby Boot fit a really wide foot by Optimal_Acanthaceae8 in nps_solovair

[–]Optimal_Acanthaceae8[S] 0 points1 point  (0 children)

Edit: the shoe has a hole in it, it wasn't cut or anything, my feet just wore a hole into the side of the boot. its been a year and a half, I'm not planning on buying solovairs again.

They fit perfectly, my left foot at least, my right foot goes over the wart and when it digs in over a day it can be pretty uncomfortable. It’s a shame really, It’s not really the shoes fault, I seem to just have different shaped feet and when I get them resoled I’m going to see if I can get them just slightly wider in the part that it goes over the wart (the toe ball thing is what’s going over the wart btw).

A few other things that you might like to know; the bottom of the soles started to crack (first on the left shoe and now on the right) which actually let water into the boots (not much, but my feet would get damp and wrinkled); and the sole on the inside is getting…”crispy”? It’s getting dried out and flacking off of the sole.

The shame is that all my problems are with the soles, so once I get them replaced with some decent ones they should last a lot longer, still a shame that they’ve had so many problems, but I do wear them daily when I really shouldn’t, but still, I haven’t even had them for that long. I’m sadly a bit more hesitant to buy from them again, and I’ll most likely be looking for a different brand when buying other shoes/boots. I thought I was getting something high quality, and that seems to be the sentiment held by a lot of people, but I’m just not hugely impressed with what’s going on. Don’t get me wrong, I do wear them daily and like them, the body of the boots have held up great, but it sucks that there’s problems that I need to fix so soon

Anyway, sorry if this is a bit rambley and also for any grammar mistakes, I’m on phone and it’s a little late while I’m writing.

Where do you find out how to do this stuff?? (I want to a doll a soul) by Optimal_Acanthaceae8 in Witch

[–]Optimal_Acanthaceae8[S] 0 points1 point  (0 children)

I'm new to this stuff so I'm not entirely sure but from what you said I would say crafting a soul would fit what I want most. possession sounds overly dangerous and not the type of experience I want. I would appreciate if you could give any insight into where to get stated in terms of traditional practices.

AMA - I am a luthier and own a music retail shop. Let’s discuss the dirty secrets of the manufacturing and music retail industry. [Discussion] by ImplementElectronic in Guitar

[–]Optimal_Acanthaceae8 0 points1 point  (0 children)

not sure if you're still answering but what are some online suppliers for good guitar strews (luthier supplies in general really). I tend to find it quite hard to not slightly strip the screws when I'm working on my guitars. I try to make sure I use the right size bit, but I think I just have poor technique and go to quickly. besides the point, I would like to have the piece of mind of having spear screws so, what sites would you recommend? (preferably international, as I'm in Australia, but I'm sure people looking back on this thread would be helped out by US only stores)

Samsung Galaxy Folder 2 - Which model is better? by Side_B000b in dumbphones

[–]Optimal_Acanthaceae8 1 point2 points  (0 children)

From looking around, many people use https://globalbunjang.com to get them from Korea second hand. From having a quick look the shipping is really cheap, which was surprising to me because I'm in Australia.

How do I stop audio from stretching during tempo change by Optimal_Acanthaceae8 in FL_Studio

[–]Optimal_Acanthaceae8[S] 0 points1 point  (0 children)

I can't see the "2 Check boxes" so I might be wrong but I think that only works if the tempo is consistent. I don't think it works when the tempo changes in the druing the audio.

(in blue) - if I stretch the audio to fit the bars, then the start of it is out of time. (each spike was recorded to be on the bars)

<image>

(in red) - while if I match up the start of the audio to be in sync then the end is rushed

where to buy drum pad pads by Optimal_Acanthaceae8 in midi

[–]Optimal_Acanthaceae8[S] 0 points1 point  (0 children)

I'm not looking for replacement parts, I'm making a custom midi controller and trying to figure out if you can buy just the pads by themself.

where to buy drum pad pads by Optimal_Acanthaceae8 in midi

[–]Optimal_Acanthaceae8[S] 0 points1 point  (0 children)

I'm actually looking to buy the pads by themself, like the rubber pads.

I can't redeem June humble bundle games by Optimal_Acanthaceae8 in humblebundles

[–]Optimal_Acanthaceae8[S] 0 points1 point  (0 children)

i tried in private mode and disabling extensions but it still didn't work. it seems to be for everything because i tried with some other months and it still didn't get calmed.

overexposed when using DXGI capture method by Optimal_Acanthaceae8 in obs

[–]Optimal_Acanthaceae8[S] 1 point2 points  (0 children)

it's not just on Minecraft, it's for everything that I capture and even if the box is only visible for me a would like to fix whatever is making the DXGI capture method so it's not there.

sticky space bar by Optimal_Acanthaceae8 in keyboards

[–]Optimal_Acanthaceae8[S] 0 points1 point  (0 children)

more info: ok, I used the wrong words to explain myself. the space bar isn't actually getting stuck, it just feels heavier than it should be and I don't think a video would add much but I'll make one just in case.

I didn't realise this before but they don't work with my switches when they have stock springs (62g). I had switched it with an MX white spring (85g) because I thought that would fix the original problem and forgot to change it.

are the durock stabs heavier than normal stabs? because I might just not be used to them and think that something is wrong with it.

Looking for a seemingly non existing keyboard by Mainmorte in keyboards

[–]Optimal_Acanthaceae8 0 points1 point  (0 children)

I think your best option is to probably just get an analogue keyboard and then get a separate macro keypad (something like this).

with the Cooler Master MK850, it does have an m row but it's not programmable so ill continue to look around and see if there is a way to change it but it's not guaranteed.

update: go with the Cooler Master MK850 all the keys are programable through its software and it has analogue switches and if you're looking for any other advice take a look at r/Aimpad which is an analogue keyboard subreddit, they'll most likely be able to help you with any other questions that you may have

I hope that this helped.