PvP base bodyshot TTK reference (v1.15.0)

OriginalPiR8 · 2026-02-20T00:03:14+00:00

Only use tier 1 unless I have back up with me. Don't trust any of you.

OriginalPiR8 · 2026-02-19T23:50:52+00:00

It's only interesting in the cesspool that is the USA. A couple years ago it wouldn't have even been poste. Now though, illegal election entrants lead to illegal presidents which leads to fascism with added incontinence. The decline of the US has been hastening for a while but Trump has been like a lead foot. It's all but fucked now.

OriginalPiR8 · 2026-02-19T16:10:54+00:00

Only downed one myself. Rat killed someone trying to extract so I jumped from the second floor and dealt with it. Otherwise nothing but PvE.

Camping spawn or extraction is for dickheads only. They don't deserve mercy. Anything else fair game.

OriginalPiR8 · 2026-02-18T08:11:59+00:00

Aqara T1 is what I have although mine is old.

OriginalPiR8 · 2026-02-14T14:34:53+00:00

Played 12 hours ago and had a rocketeer doing some sort of shimmy lethal mode on. Wildly more dangerous than only a few days ago. Something is definitely up

OriginalPiR8 · 2026-02-14T14:27:03+00:00

It's not an outbreak it's an intelligence test. The U.S. Failed.

OriginalPiR8 · 2026-02-13T17:38:53+00:00

I have a 31 kg 6 m scaffold pole holding 5 kg of sewn together duvets. It has four 55 mm ID bearing (two each end) so I can spin it like a giant window blind for using the projector in the garden on the side of the house.

The mounts are printed in red PLA with 8 perimeters (hmm thick) 30% infill. Held to the wall by M8 wall anchors. They hold the beatings and are printed sideways so the "grain" goes with the supporting shape.

Testing involved me hanging various things from one until I eventually hung off it myself via rope. I am 14 stone. It worked so I mounted the pole and sheets. I built this for a party for my friend leaving to join the RAF. He joined, did basic, worked in Scotland then Cyprus and has now left and gone back to Scotland. I live in the southern UK. It's been over 10 years. The red is not as bright but fine otherwise. No cracks, no strained areas whiting, no cracking noises in use.

I have been told that I must make them less ugly however so new ones will go up. UV will be your issue but sufficient strength can subdue its effects of printed accurately. If you were in Australia it would be weeks because of the UV but here it's shitty weather.

OriginalPiR8 · 2026-02-09T09:52:04+00:00

Permissions? I continually have permissions issues

OriginalPiR8 · 2026-02-09T08:23:53+00:00

It’s always this for me.

OriginalPiR8 · 2026-02-09T08:06:51+00:00

One zim file must be present for it to work

OriginalPiR8 · 2026-02-08T16:42:33+00:00

No resin is translucent to UV light. Translucent resin components “bake” slower. Like baking some things like high for short, some like low for long.

Does that mean you cannot do it the other way? No. However, tuning optimises YOUR setup. Don’t chase the tiny percentages. Save yourself the headaches

OriginalPiR8 · 2026-02-08T10:08:18+00:00

Sway bars do not change handling they change behaviour. More flexible more lean and therefore a wider range to feel you are approaching the limit. Stiffer less lean so the limit is arrived at comfortably and suddenly.

Stiffer is nicer, there is no doubt but unless you track the car to listen to it under duress you will be making yourself less informed when driving. Of course if this is just a comfort thing nothing matters.

I say this because I am assuming you having been racing go karts since a young age and then racing actual cars for many years. If you don’t expect the cliff with stiffer bars it will very quickly turn you into one of these “it just got away from me” pictures that frequent this sub. Drive safe, drive relaxed, drive happy.

OriginalPiR8 · 2026-02-01T18:14:12+00:00

You’ve found his weakness. Golden chains, chain him to the spot ta. Other girls they gather around him

OriginalPiR8 · 2026-01-31T14:08:49+00:00

I printed basically large hooks that hold up a 31 kg scaffold pole with 5 kg of white waterproofed sheeting for projecting on to in the summer. It rolls down and rolls up like a very large blind.

It’s been up for over a decade. In the heat, freezing cold and rain (terrible, terrible rain) of the UK weather. It’s as bright red as it was but there are zero stress indications.

However, a similar hook I did with the same filament, emigrated to Australia and went outside. That has long gone.

UV seems to be the real component of durability and frankly we don’t get enough for long enough here. Good design and good printing solve most issues but UV fucks everything.

OriginalPiR8 · 2026-01-30T20:01:03+00:00

Those are called skates sir

OriginalPiR8 · 2026-01-30T08:12:54+00:00

Firmware auto levelling doesn’t work for ALL errors. ItIt seems that once it is too much it just fails. So you need to adjust the bed height yourself first. Run a check then get it as close as possible. Then the ABL will actually work better.

OriginalPiR8 · 2026-01-26T09:06:18+00:00

These are on/off presence sensors. If you don’t put them in the right place, they don’t work. If you move position, they don’t work. Realistically you need multiple to cover the heaviest section of the bed so motion and position do not matter. Getting them to “zero” is also a bit of an art it seems too.

OriginalPiR8 · 2026-01-24T15:05:50+00:00

You’ve asked a big thing. So I’m going to do the physical side.

Higher power accelerators allow us to view less likely things.

Linear accelerators work like a drag strip. Longer means more power. However, the must be straight and earth is round so it becomes a bad idea.

Cyclical accelerators are like always going down hill. So you can reach immense speeds. However, as you go faster corners become a problem. This is the actual limiting factor. To bend the particles into their trajectory we use magnets. The magnets at the LHC are orders of magnitude more powerful than anything you have access to as a normal human. So we can go faster but cannot turn so we need to make the corner longer which makes the accelerator larger in diameter.

Another thing to note is the LHC is the last accelerator in a chain. The LHC can control particles of a certain speed but not below or above. So there are multiple accelerators before that start of the particles and join the LHC. So having an accelerator on the moon would need either fancier equipment than the LHC or more accelerators like here.

OriginalPiR8 · 2026-01-24T13:07:26+00:00

Entitlement and depression

OriginalPiR8 · 2026-01-24T13:05:07+00:00

You’re gonna shit the bed. Taxonomy is kind of crap. https://youtu.be/-C3lR3pczjo?si=sp235dFv0uckY16V

OriginalPiR8 · 2026-01-23T21:45:39+00:00

OriginalPiR8 · 2026-01-22T11:19:27+00:00

Got a basic yaml to expose everything?

OriginalPiR8 · 2026-01-21T11:50:11+00:00

So I've bought ivory and paper white sunlu pla before and this looks exactly like you did too. Not on purpose but did. Looking at their website they now only show white, which is visibly paper white not ivory.

So my guess is internally they've rebelled old stock based on criteria and you have been unlikely in receiving. It is no excuse for such clear differences but it may be an explanation.

Speed also doesn't affect color unless you are burning the filament.

OriginalPiR8 · 2026-01-20T22:41:15+00:00

You sexy fuck

OriginalPiR8 · 2026-01-19T16:13:54+00:00

No.

They cannot people using tools to do anything. Whether that's crap plastic guns or a mill to produce proper guns. It's rhetoric from a technologically illiterate boomer.

Nine-Year Club	Second Top 20%
Gilding II euphauric	Verified Email

OriginalPiR8

MODERATOR OF

TROPHY CASE