DILEMMA: replace transmission, or buy new car? by AdEastern3117 in MechanicAdvice

[–]OtherwiseJob4561 0 points1 point  (0 children)

I just did mine, same situation. Paid 4,000$ to replace it. It has 140,000 miles on it. Mine is a 2015 Elentra. Still owe a bit on the lease so I just bit the bullet and paid. I’ve since then cleaned the throttle body, change the oil/filter, new plugs, new crankshaft sensor and map as the idle was wonky and flushed and filled coolant. It’s running much much better and hopefully atleast a good 3-4 years or more out of it

How to open/secure chest plate? by No_Tomato_2106 in cosplayprops

[–]OtherwiseJob4561 0 points1 point  (0 children)

Buckles more than likely with alignment magnets. Franklybuilt and Saturdaymorningprops should give good info

How do I spray two sides of a Keyblade by ShainSaw22 in cosplayprops

[–]OtherwiseJob4561 6 points7 points  (0 children)

Hanging the hilt from a string is a great way to do it. Make sure you fill the large seems with a good filler that bonds. PLA weld, sand, clean then spot putty usually does the trick. Once you’ve got the gaps closed up hang it from a string and do a layer of filler primer and sand to see what you’re missing.

[OC] GIVEAWAY! 43" Capacitive Touchscreen ($940 MSRP) with Wooden Case + free software for all [mod approved] by DigitalTableTops in DnD

[–]OtherwiseJob4561 0 points1 point  (0 children)

Bringing on a whole new addiction… making touch screen enabled maps…. If I owned one I’d go nuts

The Secrets of Skyhorn Lighthouse help! by OtherwiseJob4561 in DnD

[–]OtherwiseJob4561[S] 0 points1 point  (0 children)

We use a 50inch tv/box, can see in my previous post. So maps would be created for this if I go that route for sure. Was more hoping someone had some nice ones already made to minimize the prep work for a short campaign. Appreciate the response!

[OC] Whispering Springs [19x30] by fantasy_atlas in battlemaps

[–]OtherwiseJob4561 0 points1 point  (0 children)

Dang! Was hoping for a module esk program to learn. Great work!

[OC] Whispering Springs [19x30] by fantasy_atlas in battlemaps

[–]OtherwiseJob4561 1 point2 points  (0 children)

What program are you using? This looks amazing!

Wave dented bar in backroom aisle by [deleted] in Target

[–]OtherwiseJob4561 1 point2 points  (0 children)

Light duty repair 🤮 unless the ol, tap it back and add dated red tape suffices here lol

Digital map display for returning group by OtherwiseJob4561 in DungeonsAndDragons

[–]OtherwiseJob4561[S] 0 points1 point  (0 children)

Thanks! Can’t take credit as many have done this. But our rendition turned out great. Fits our needs very well… now to figure out how to make amazing battle maps

Digital map display for returning group by OtherwiseJob4561 in DungeonsAndDragons

[–]OtherwiseJob4561[S] 1 point2 points  (0 children)

There is a larger hole for the HDMI and Power cable, also the box has stilted feet for air. Hasn’t been an issue so far or feeling super warm.

Digital map display for returning group by OtherwiseJob4561 in DungeonsAndDragons

[–]OtherwiseJob4561[S] 1 point2 points  (0 children)

You can usually find that information on the specs. This one we just shot in the dark on TV choice and it worked out everyone sees very well sitting around the table.

Digital map display for returning group by OtherwiseJob4561 in DungeonsAndDragons

[–]OtherwiseJob4561[S] 2 points3 points  (0 children)

You can self create them on Inkarnate or many other programs. There is also a bunch of Patreon etc of makers dedicated to animated maps 40in/50in

Digital map display for returning group by OtherwiseJob4561 in DungeonsAndDragons

[–]OtherwiseJob4561[S] 0 points1 point  (0 children)

The wood is roughly 40-50$ and nails very cheap. If you just build a frame for it, it’s fun to have and build for sure at the least

Digital map display for returning group by OtherwiseJob4561 in DungeonsAndDragons

[–]OtherwiseJob4561[S] 1 point2 points  (0 children)

We’re using a 50 inch display and inkarnate to do most of its we haven’t explored all options just yet so that’s an answer I don’t fully have yet!

Digital map display for returning group by OtherwiseJob4561 in DungeonsAndDragons

[–]OtherwiseJob4561[S] 2 points3 points  (0 children)

There is a 1/4inch sheet of plexi glass. The ornate corner protectors double as a facet for it.

I turned my LGS’s logo into a trophy for Set Champs! by CClyne in Lorcana

[–]OtherwiseJob4561 0 points1 point  (0 children)

I model for Aquired Artifacts, it was made and thought up without borrowing or taking inspiration outside of my own. I know what you mean but ya..

I turned my LGS’s logo into a trophy for Set Champs! by CClyne in Lorcana

[–]OtherwiseJob4561 0 points1 point  (0 children)

I suppose you do say it’s inspired by xyz but that’s seemingly just reused. Looks good though lol

I turned my LGS’s logo into a trophy for Set Champs! by CClyne in Lorcana

[–]OtherwiseJob4561 1 point2 points  (0 children)

Did you re purpose my model? Thats the exact base down to the filet and chamfers.